Farm Equipment Livestock Waterers For Sale In Gilbert

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Pride of the Farm 1/4" Orifice on a VP124 Valve. It has O'ring on one side & a Diaphragm on the other (not included). #7 on breakdown.

Robert's Brass 3/8" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

Pride of the Farm Element for electric waterer units.

SPI 4x4 - 3/8" x 1" x 22' gasket only.

Megaflow Yellow Float Only.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

Heating element ONLY for the Johnson Concrete Model J360.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

Blue 10" replacement ball for the Mira Fount M3465 & M3465E cattle waterer.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Concrete stud lags included, High flow valve. More drinking length. Float is easily adjustable for varying water levels, Spring loaded pin allows access panel to pop off with the twist of a screwdriver.

This bolt package is for Models 101, 202 & 404 with or without heat.

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

600 watt x 120 volt heating element only Arkfeld waterer element replacement.

VP2, from our program of continuous improvement, is designed to accomplish several things. The last number on the VP2 matches up with the VP1 valve. A greater flow rate because the plunger travels a longer distance; 3.

SPI hatch cover for model 4x4 energy free waterer.

Rojo Float Valves are ideal for filling water drinking troughs for small numbers of animals. They mount above or below the water and give flows of up to 6 gallons per minute. FEATURES: Side, Bottom, Top Mounting Valve body screws apart by hand for easy...

It will take abuse! Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & hold up to chemically active soil conditions. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

45 Gallon, 48" x 35" x 25" - 1345# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

52" L x 30 3/4" W x 24" H 33# 5 year warranty Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece...

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

More drinking length. Water circulation is a assisted with our patented baffle design and discharge ports. It has 70 inches of drinking length and holds 70 gallons. Warmer water pushes through the ports and cooler water returns under the baffle.