Farm Equipment Livestock Waterers For Sale In Frisco

It will take abuse! Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground. Corrugated design provides rigidity without bulk when back filled with earth.

It moves the upper arm and is also held by thumbscrew to the float arm. The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin.

Johnson Waterer Element Clips to hold the heating element.

Do Not Immerse into liquid. 450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater.

Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers.

40 Watt x 36" Heat Tape used in the Energy Efficient & All Purpose waterers.

SPI 351/352 (old style) Rubber Drain Plug only .

O'Ring only replacement for Frost Pro Accessory.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

Blue octagon plunger that fits inside the Mira Fount cattle waterer valve.

Screw that holds the float connect to the top of the float.

All edges have been rounded for safety & strength. 3 year warranty. The larger tanks come with 1.25� drains installed. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks.

A drain plug for Arkfeld waterers - 1 1/2" in size - Cork.

White styrofoam triangular disc float only.

You can expect an entire winter's heating bill of $25.00 or less - and this from a drinker that can water 250 head of beef using only 250 watts. 2" built in drain, stainless steel spring loaded attachment pins make cover removal & replacement easy, recessed,...

No other parts are included with this Power Link. Pride of the Farm Power Link locks to the VP124 valve body with a link pin & then thumbscrews to the float arm. #1 on breakdown.

Pride of the Farm Element for electric waterer units.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

It will take abuse! Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Corrugated design provides rigidity without bulk when back filled with earth.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

The brass valve and submersible heater are both enclosed by the valve hatch. It also features a molded bolt foot and rounded corners for livestock safety. 21.75" W x 28" L x 16" H 5 year warranty.

Thermostat ONLY for all Johnson Concrete Waterer Models.

SPI Drain Plug (#11) for all New Generation waterers.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

It moves the upper to and is also held by a thumbscrew to the float arm. The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin.