Farm Equipment Livestock Waterers For Sale In Fort Collins

THIS UNIT IS FOR METAL TANKS ONLY. ICE-N-EASY 1500W, thermostatically controlled to operate only when necessary. Farm Innovators floating tank de-icer has a heavy duty anti-chew cord protector with a 1 year guarantee.

No inside working parts included. The inside base of the Franklin Valve. This piece holds the plunger and upper arm.

This piece is held by two thumbscrews not included in this part. 3" orange arm that fits between the lower arm and the float connect.

The Robert's 3/4" brass valve housing only.

It has a 15" drinking height and four 9 1/2" x 9 1/2" door opening. The patented door closure system has a set back seal and drain to help counteract the problems associated with door freeze up.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.

THE RACE IS OVER. Stainless steel access plates. Model VT100 valve delivers about 2 1/2 gallons (9.5 liters) per minute. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations in box stalls--but can be installed outdoors...

SPI 3.75" Brass Short Float Stem only.

This piece is held by two thumbscrews not included in this part. 6 1/2" orange arm that fits between the lower arm and the float connect.

A great way to carry more water for my RV 5th Wheel. I found the stated 50 gallon water capacity ends up being 35 gallons. I often camp where water is not readily available and the added capacity definitely allows a more comfortable or extended stay.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

Robert's Brass 1/2" plunger only for replacement in existing 1/2" valve.

Connects valve to 301 round float A brass rod float arm 1/4" x 1 1/2" with threads on each end.

This model features an adjustable short arm for customizing water level. Robert's Brass 1/2" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

The WPM14 is an extremely rugged 4 door opening, energy free unit for hogs. Unique baffles guard against icing & keep valve operating under severest conditions. Serves 200 hogs, 10 sow.

It will take abuse! Won't rust, resists rot & holds up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. Unaffected by ground movement due to freezing & thawing.

28 1/2" x 20" x 10 1/4" Available in Aqua Blue color only. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. High Country Plastics Aqua Tank products are rotational molded with high quality...

Pride of the Farm Element for electric waterer units.

Robert's Brass 3/4" plunger only for replacement in existing 3/4" valve.

It will take abuse! Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. Unaffected by ground movement due to freezing & thawing.

All edges have been rounded for safety & strength. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole.