The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.
Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). We tested this unit in our own cold chamber.
Constructed of Cast Aluminum for ultimate efficiency & safety. The most durable floating tank de-icer available with 1250 Watts. Ideal for use in Ponds 50 to 600 gallons. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete.
Notched flanges for easy anchoring. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.
Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.
The Pride of the Farm "King" Energy Free drinker is beefy & ruggedly built but simple. Our drinker has foam filled double wall construction which adds to the efficiency. 2" built in drain, stainless steel spring loaded attachment pins make cover removal...
The D-Clip features no tools required to remove lid, no crossed/stripped thread failures, quick replacement if damaged & commonly available at farm supply stores. It is insulated with polyurethane insulation & has patented door closure systems.
68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...
Notched flanges for easy anchoring. It has simple installation, attractive design & has animal friendly flaps - no ball or float closures to ice. No heat well needed; use an 8-12" tile; can be fitted on most existing pads.
Engineered with the farmer in mind, this waterer allows easy access to the submersible heater, water line, incoming services and provides effortless cleaning; an extremely low maintenance product.
The Tru-Test Apex Xtraflo 3/4" or 1" Trough Valve is a full flow - diaphragm activated, armless, self-cleaning valve mechanism. You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float.
We tested this unit in a cold chamber at minus 30 degrees Fahrenheit (-34.4 degrees C). The cavity can be used to make the connection from the supply line to our valve. No freezing occurred at this temperature--even after 7 days! Heating cost is minimal--less...
Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.
No diaphragm, cam link and power link which are three fewer maintenance items. VP2 VALVE The VP2 is our next generation valve which replaces our VP1 valve series. VP2, from our program of continuous improvement, is designed to accomplish several things.
