Farm Equipment Livestock Waterers For Sale In Concord

Connects valve to 301 round float. A brass rod float arm 1/4" x 1 1/4" with threads on each end.

It moves the plunger to and from the orfice. The upper arm is blue and is located in the top bracket of the top base and is held by a lock pin.

Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. It will take abuse! 15" OD, corrugated plastic tubing.

Apex replacement float with string included.

No freezing occurred at this temperature-even after 7 days! Double wall, single piece poly construction -- ALL SMOOTH! Internal 3/4" (1.9 cm) AND external 2" (5.1 cm) drains. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS - For corner installations...

Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees. Often used in Franklin & Arkfeld waterers.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red & Tan. The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation.

This white pin holds the upper arm to the top base.

Robert's Brass 3/4" orifice Valve complete with plunger and arms. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. This model features an adjustable short arm for customizing water level.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

Black rubber seat to fit inside the Mira Fount Blue Plunger in a Mira Fount cattle waterer valve.

Pride of the Farm Plastic 3 5/8" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float. This part number is for the arm only & is usually used on the Polar Max waterers.

Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red & Tan available by special order. The larger tanks feature incorporated pallet fork opening on the bottom, eliminating accidental punctures while providing easy transportation.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float.

(sold in pairs) SPI Rubber door hinges with screws for all of the New Generation energy free waterer.

SPI foamed 4x4 energy free waterer door only.

Robert's 3/4" leather cup ring that fits on the brass plunger.

The heat tube is designed to mate with the cavity under the drinker base. Both the water line & the electrical supply can enter from below. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but...

The dimensions of this tube is 12 3/4" OD x 49" tall with 2 1/2" of insulation. The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups.

This is the arm that opens & closes the plunger. #2 on breakdown. Pride of the Farm Cam Link locks to the VP124 valve body on the top side with a link pin. No other parts come with the Cam Link.

Easy to install & installs in only minutes. Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Guaranteed for 1 year & SAFE IN PLASTIC. Thermostatically controlled to only run when necessary.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

O'Ring only replacement for Frost Pro Accessory.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve