Farm Equipment Livestock Waterers For Sale In Columbia

Water and electric lines run underground below frost line. The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element.

This two hole, 5.2 gallon waterers uses a 250 or 500 watt submersible heater and can easily ship UPS. No more rust or corrosion! These electric waterers are built of a polyethylene construction creating a strong corrosion free product to provide many...

Use this valve assembly with the J303 with without heat.

This donut shaped 500 Watt De-Icer is designed for multiple uses around the farm. Thermostatically controlled to only run when necessary. Good for us in containers up to 50 gallons and sold with many different manufactured automatic livestock waterers.

Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

SPI foamed 4x4 energy free waterer door only.

Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers. It measures 3.25" x 4.25" x 2.38".

1000 Watt Immersible element used in the PC2 or PC10 waterer.

The Tru-Test Apex Xtraflo 3/4" valve with brass rod arm attached to the black round float for Anti-Siphon use.

Robert's Brass 1/2" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

Pride of the Farm Element for electric waterer units.

This unit is insulated with 3 1/2" of polyurethane insulation. Up to 50% more usable water capacity than the competition. Earth Tube is suggested with installation. The peaked roof and raised ribs around the door openings prevent manure, feed and other...

Tolerance to water level - you don't have to worry about summer & winter water levels. Unique baffles guard against icing & keep valve operating under severest conditions. Livestock can drink out of both flaps at the same time, not always so with a ball...

Won't rust, resists rot & holds up to chemically active soil conditions. Unaffected by ground movement due to freezing & thawing. Corrugated design provides rigidity without bulk when back filled with earth.

SPI 2 1/2" Brass Short Float Stem only.

The lower arm is orange and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper to and is also held by a thumbscrew to the float arm.

Robert's Brass cotter key that connects the long arm to the valve body.

Farm Innovator's Ice Chaser operates automatically only during freezing temperatures. Operates effecicently at the bottom of the bucket because warm water rises. SAFE IN PLASTIC. 1 year warranty.

The Tru-Test Apex Xtraflo 3/4" Trough Valve Long Tail is a full flow - diaphragm activated, armless, self-cleaning valve mechanism, with a longer valve end. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level...

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

The Jug Basic Float Valve fits Models J101, 202, 303 & 404 with or without heat.

Float Arm for the Mira Fount M3330 waterer.

Heating element ONLY for the Johnson Concrete Model J360.

A brass rod float arm 1/4" x 1 1/4" with threads on each end. Connects valve to 301 round float.