Farm Equipment Livestock Waterers For Sale In Cincinnati

It is a split plastic coupler that fits into the corrugation of the Earth Tube. Used for joining multiple Earth Tubes.

It is held by a float screw and connects on to the bottom of the float arm. Plastic piece that sits on top of the float.

Heating element ONLY for the Johnson Concrete Model J360.

#9 on breakdown. Pride of the Farm 3/4" OD x 1/4" ID DURAPRIDE Plastic Base that screws to your water supply line.

#4 on breakdown The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. Pride of the Farm Link pin only.

600 watt x 120 volt heating element with surface mount thermostat included. Arkfeld waterer element & thermostat replacement.

1000 watt x 120 volt heating element only. Arkfeld waterer element replacement.

Both the water line & the electrical supply can enter from below. The heat tube is designed to mate with the cavity under the drinker base. You should use silicon caulk to assure an airtight fit.

Filter replacement for Topaz & Megaflow Valves.

It measures 3.25" x 4.25" x 2.38". Pride of the Farm White Poly Float that screws into the float arm & turns the water off & on in your waterers.

A drain plug for Arkfeld waterers - 2" in size - Cork.

You can mount this valve on the bottom or on the side and has a bouyancy equal to a 6" round float. It's design reduces stock damage & minimises blockage. It has an above water float adjustment, cord cleat for shutting off valve and a 1 1/2" water level...

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Robert's Brass cotter key that connects the long arm to the valve body.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .45" orfice inlet.

Robert's shut off only arm attached to the bottom of the Robert's Brass Valve.

6, 7 and 12 (see parts list in pictures attached) B81 includes: Ref. B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID. It will take abuse!

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill the hole. The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction...

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

You do need proper installation to prevent the supply line underneath the drinker from freezing. Notched flanges for easy anchoring. Stainless steel spring loaded valve cover removes easily.

Robert's Brass thumbscrew that connects the short arm and long arm.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.