Farm Equipment Livestock Waterers For Sale In Charleston

There are no loose parts, Lower access panels on each end. Feature Include: Recessed, protected notches for anchoring, Our 8 notches do not protrude where they can be hit. Concrete stud lags included, High flow valve.

Blue plastic valve assembly fits a 3/4" FPT with a 3/4" orfice inlet. Mostly used on cattle waterers.

1/2" orfice only for the inside of a Franklin Valve.

A brass rod float arm 1/4" x 6" with threads on each end. Connects valve to 301 round float.

This orange plunger holds the seat (not included) and is pushed by the upper arm towards or away from the orfice.

Works automatically to ambient temperature. Has many uses around the home & farm. Turns on at 35 degrees & turns off at 45 degrees. Operates with any 15 amp 120V electric heater or fan.

Pride of the Farm Plastic Nut Only that holds the base & plunger tight inside the Valve Body. #10 on breakdown.

Compared to other "intermittent flow devices", the Ice Sweeper is very dependable, uses less water & shuts off water flow reliably when the threat of the water freezing is gone. * The Ice Sweeper comes with a full 3-year limited replacment warranty, exclusive...

Custom made to use in all Rubbermaid stock tanks with 1500 Watts of power. Unit is unnoticed by livestock - no cord in water. Thermostatically controlled to only run when necessary.

Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet, includes arm that will fit any length, 2 thumbscrews & plastic float. Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm.

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. Available in Forest Green in stock, other colors available for special order are Ash Grey, Black, Blue, Red...

This donut shaped 250 Watt De-Icer is designed for multiple uses around the farm. Thermostatically controlled to only run when necessary. Constructed of Cast Aluminum for ultimate effiency & safety.

Thermostatically controlled to only run when needed. Ideal for use in Ponds 50 to 600 gallons. Guaranteed for 3 years & SAFE IN PLASTIC, rubber liners or concrete. Constructed of Cast Aluminum for ultimate efficiency & safety.

No pulleys & cable to foul & rust. No heat well needed; use an 8-12" tile; can be fitted on most existing pads. Foam insulation between walls has an R-value of 7.14". The WPM120 is an extremely rugged 6 door opening, energy free unit for cattle.

3 year warranty. The larger tanks come with 1.25� drains installed. Available in Aqua Blue color only. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in...

The SPI Insulated Earth Tube conserves the earth ground source heat as it rises up the vertical shaft to help protect the water line from freeze ups. They can also be easily stacked for deeper installations.

Robert's Brass 1/2" sand plunger only for replacement in existing 1/2" valve. Suggested where sugar sand is a problem in the water supply.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

SPI 351/352 (old style) Rubber Drain Plug only .

1 year warranty. SAFE IN PLASTIC TANKS. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during freezing temperatures. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed...

Megaflow Yellow Float Only.

Plastic piece that sits on top of the float. It is held by a float screw and connects on to the bottom of the float arm.

Arkfeld waterer element replacement. 600 watt x 120 volt heating element only

Robert's Brass 1/2" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level. The R400 series is a high-capacity float valve with male NPT inlet and outlet connections.

6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker. B81 includes: Ref.