Farm Equipment Livestock Waterers For Sale In Cape Coral

A drain plug for Arkfeld waterers - 2" in size - Cork.

SPI hatch cover for model 4x4 energy free waterer.

1 year warranty. It features a heavy duty anti-chew cord protector & operates efficiently at the bottom of the tank; unnoticed by livestock. SAFE IN PLASTIC TANKS. Farm Innovator's Submergible 1500 Watt Tank De-Icer operates automatically only during...

The Topaz is compact, robust and manufactured from non-corroding materials. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons...

Often used in Franklin & Arkfeld waterers. Surface mount thermostat used in galvanized waterers. Turns on at 36 degrees and turns off at 48 degrees.

This Complete Valve is used on the J303 or J303EF Corner Mount Horse Stall Waterer.

Weather seal is for Models 101, 202 & 404 with or without heat. The 101 model takes 1 kit, the 202 & 404 needs 2 kits.

The Topaz is compact, robust and manufactured from non-corroding materials. Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons...

#3 on breakdown. Pride of the Farm VP124 plastic valve body only. No lock pins or inner parts included.

Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly. #8 on breakdown.

Valve 36" Float Cord Only.

Robert's 3/4" leather cup ring that fits on the brass plunger.

Foam insulation between walls has an R-value of 7.14". 2-2" drain holes for fast clean out. Serves 200 hogs, 10 sow. The WPM14 is an extremely rugged 4 door opening, energy free unit for hogs.

If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch to fill in the hole. The larger tanks come with 1.25� drains installed.

White styrofoam round disc float only.

Some warm geographic areas do not use a riser tile and may only have a buried supply line protruding through a concrete pad. Four recessed anchor notches for secure installation. For stalls, corrals and paddocks.

#4 on breakdown The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. Pride of the Farm Link pin only.

It will turn on the heating element at 45 degrees Fahrenheit and off at 60 degrees to provide reliable freeze protection with the waterers. The Model HE-CNTRL air sensing thermostat is a replacement for the original "bulb and bellows" thermostat, used...

45 Gallon, 48" x 35" x 25" All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water valves...

White styrofoam triangular disc float only.

The lower arm is blue and is located in the bottom bracket of the top base and is held by a lock pin. It moves the upper arm and is also held by thumbscrew to the float arm.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well. Unaffected by ground movement due to freezing & thawing. Won't rust, resists rot & holds up to chemically active soil conditions.

450 watt heater, 3" wide x 2 1/4" tall x 11" long, adjustable theromstat multi purpose portable heater. Do Not Immerse into liquid.

Foam insulation between walls has an R-value of 7.14". 2-2" drain holes for fast clean out. Serves 225 beef, 100 dairy, 175 cow/calf. The WPM80 is an extremely rugged 4 door opening, energy free unit for cattle.

A brass rod float arm 1/4" x 2" with threads on each end. Connects valve to 301 round float.

A brass rod float arm 1/4" x 10" with threads on each end. Connects valve to 301 round float.