Farm Equipment Livestock Waterers For Sale In Buffalo

These are not included when ordering a base only. There are four base screws that hold the top base to the bottom base.

The 303 Riser Tube protects the water supply line from the cold by insulating it in urethane foam, and warming it with a low wattage heating element. Water and electric lines run underground below frost line.

Connects valve to 301 round float. A brass rod float arm 1/4" x 8" with threads on each end.

Warmer water pushes through the ports and cooler water returns under the baffle. Our 8 notches do not protrude where they can be hit. There also is a 3 inch opening at the bottom of the tower which permits drainage through a tile line to a lagoon, Constant...

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

Inside repair kit for Topaz & Megaflow Valve.

3/4" male to female hose used to hook up the water line to the waterer.

Turns on at 36 degrees and turns off at 48 degrees. Surface mount thermostat used in galvanized waterers. Often used in Franklin & Arkfeld waterers.

SPI 351/352 (old style) Rubber Drain Plug only .

The R400 series is a high-capacity float valve with male NPT inlet and outlet connections. Robert's Brass 1/2" orifice Valve complete with plunger and arms. This model features an adjustable short arm for customizing water level.

Robert's 3/4" leather cup ring that fits on the brass plunger.

It takes a quarter turn with a straight edge screwdriver. Lower access opening is 6" x 19". Great value & great features don't have to come in a boring, boxy profile. The Pride of the Farm "Knight" Large Animal Energy Free Drinker.

Won't rust, resists rot & holds up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing.

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Won't rust, resists rot & hold up to chemically active soil conditions. Corrugated design provides rigidity without bulk when back filled with earth. 15" OD, corrugated plastic tubing insulated inside with Urethane foam to a 10" ID.

The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped. The MicroSweeper is designed an manufactured to provide a long life in tough conditions and to deliver unexcelled performance.

A Brass short arm to connect the valve and the round float in Arkfeld and SPI waterers.

Pride of the Farm Element for electric waterer units.

Pride of the Farm's trough drinker is a favorite for feedyards , pastures and dairies. Water circulation is a assisted with our patented baffle design and discharge ports. Backed with the strongest warranty available.

68 Gallon, 72" x 35" x 25" - 1910# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

#11 on breakdown. Pride of the Farm Plastic Thumb Screw that connects the Power Link & the Float arm (not included).

They are made for tanks which have the valve mounted above or below the water. The Topaz is compact, robust and manufactured from non-corroding materials. Its diaphragm principle of operation allows the Topaz to give flows of up to 90 gallons per minute.

The peaked roof and raised ribs around the door openings prevent manure, feed and other contaminants from being washed into the bowl, and facilitates water run off. The new Next Generation waterer utilizes 4 Quick Release D-Clips to secure the top to...

With quick release access clips for the hatch cover and access doors, installation and work is a lot quicker. 5 year warranty. The new Value Series waterers from SPI are a "no tools required" waterer.