Farm Equipment Livestock Waterers For Sale In Birmingham

Robert's 1/2" rubber plunger seat only.

Its diaphragm principle of operation allows the Megaflow to give flows of up to 90 gallons per minute. Megaflow Float Valves are ideal for filling troughs which are constructed to have the valve mounted under the water on the side or on the bottom.

Specify model 354, 352 or 351 energy free waterer. SPI foamed door only.

The 101 model takes 1 kit, the 202 & 404 needs 2 kits. Weather seal is for Models 101, 202 & 404 with or without heat.

Thermostat ONLY for all Johnson Concrete Waterer Models.

Robert's Brass 3/4" orfice Valve complete with sand plunger and arms.

Dimensions: 41" x 20" x 23". Maximum 24-hour electrical use is 1.56 kwh. Features: *Open bowl design *Draw Tube for natural drinking action *External Drain Plug for easy cleaning *Sledge hammer tough, rotationally molded plastic construction *Inspection...

Float Arm for the Mira Fount M3330 waterer.

O'Ring only replacement for Frost Pro Accessory.

Johnson Waterer Element Clips to hold the heating element.

Connects valve to round float. A brass rod float arm 1/4" x 1" with threads on each end.

The larger tanks feature incorporated pallet fork openings on the bottom, eliminating accidental punctures while providing easy transportation. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded...

Topaz Float Valves are ideal for filling tanks where mounting above the water is preferred. Features Has Detach for quick access to valve seal Mounts horizontally or vertically Made from corrosion resistant materials Shuts down slowly to minimize water...

Dependable, non siphoning valve - proven & trouble free. 2-2" drain holes for fast clean out. Polar Max Drinkers operate like thermos all year long. Optional wing bolts are available for Grade A inspections.

Must be used with part #400267 Plunger Only. This black seat fits inside the plunger and shuts off the water through the orfice.

VP2 Valve Upgrade Kit for 1/4" Orfice Valve

The heat tube is designed to mate with the cavity under the drinker base. The ground mount tube ONLY provides some cold weather protection to your barn stall waterer (not included), but you may need to add heat tape to the water supply line.

This bolt package is for Models 101, 202 & 404 with or without heat.

Unique covered design aids in eliminating debris from contaminating the water supply Holds 2 gallons Bottom drain for easy cleaning Can be attached to timber rails, wall, pipe rails or steel gate Includes 4 self taping screws & 4 cable ties for installation...

Robert's Brass thumbscrew that connects the short arm and long arm.

Spring loaded pin allows access panel to pop off with the twist of a screwdriver. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation and efficient heat dispersal into the drinker troughs.

They don�t have to learn to lift flaps or push balls and floats are out of the way; they just use their natural sucking method to drink from the open hole. Custom mounting options for special situations are also available.

#8 on breakdown. Pride of the Farm 5/8" O'ring that goes between the valve base & orifice on a VP124 Valve assembly.

SPI 351 (old style) gasket only.

Screw that holds the float connect to the top of the float.

Valve installs in any type of tank up to 1/2" wall thickness. For tanks with thicker walls such as concrete or wood, order the optional Breather Collar Kit. Valve works with water pressures from 12 to 125 psi.