Farm Equipment Livestock Waterers For Sale In Aurora

Connects valve to 301 round float. A brass rod float arm 1/4" x 8" with threads on each end.

No inside working parts included. This piece holds the plunger and upper arm. The inside base of the Franklin Valve.

#12-2 on the breakdown. This part number is for the arm only & is usually used on hog troughs. Pride of the Farm Plastic 2 1/2" Float arm is connected to the Power Link by a thumbscrew & then screws directly into the Poly float.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

We are all delighted to have the replacement installed - easy to do - and the waterer functioning perfectly. Our original float valve got broken during the barn remodel.

The tower is foamed filled and the surrounding wall and valve cover are foam filled, Shutoff valve, 3/4" is standard, Through slopes to drain. Feature Include: Recessed, protected notches for anchoring.

The one piece construction eliminates cracking & splitting common in plastic-welded, two piece construction tanks. The larger tanks come with 1.25� drains installed. 3 year warranty.

This Shut off ball valve is to be used on Models 101, 202 & 404 with or without heat.

The connect the Cam & Power Link to the VP124 valve body. #4 on breakdown Pride of the Farm Link pin only. You will need 2 per valve assembly.

This repair kit will fit in all Apex Valves & is made for use in all high pressure or low pressure applications.

Molded with the most effective ultraviolet inhibitor. Over 300 square inches of access for easy hook up. A typical winter heating bill of $10.00 or less! Why? Two 2 inch side drains and 1 threaded bottom port for optional inside drain.

1000 watt x 240 volt heating element only. Arkfeld waterer element replacement.

Has many uses around the home & farm. Saves money by using power only when temperatures require. Turns on at 35 degrees & turns off at 45 degrees. Works automatically to ambient temperature.

High Country Plastics water tanks are rotational molded with high quality FDA approved UV protected plastic to ensure uniform thickness & strength for maximum durability & longevity.

The Pride of the Farm "Knight" Large Animal Energy Free Drinker. (30 years of use) 2" built in drain, overflow port can be used either as an internal drain or it can be used for optional continuous flow operation, rugged notches for secure anchoring &...

B81 includes: Ref. 6, 7 and 12 (see parts list in pictures attached) B81 Hook, Rod, Cone and Nut Assembly for WFD85 and MFD85 field drinker.

The MicroSweeper is plumbed near the float valve, usually in the port where the petcock was installed. The intermittent flow MicroSweeper can be easily plumbed in any type of waterer, no matter how it was originally equipped.

Suggested where sugar sand is a problem in the water supply. Robert's Brass 3/4" sand plunger only for replacement in existing 3/4" valve.

A drain plug for the Arkfeld waterers - 1 1/2" in size - Black rubber.

SPI 351 (old style) gasket only.

Typical heating cost for one heating season only $10! 250 Watt, 110 volt heater.

Double wall DURAROCK construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor. Serves 350 beef, 150 dairy, 225 cow/calf. It has simple installation, attractive design & has animal friendly flaps - no ball or float...

Mostly used on cattle waterers such as Franklin, SPI & MiraFount and Pride of the Farm. Blue plastic valve assembly fits a 3/4" FPT with a .25" orfice inlet.

White styrofoam triangular disc float only.

It is manually operated and when turned on allows a continuous flow of water through the valve to assist in the prevention of water freezing in the valve and pipe work supplying it.

Screw that holds the float connect to the top of the float.

This Front Float Valve fits Models 101, 202 & 404 with or without heat.