Farm Equipment Livestock Waterers For Sale In Alaska

And a MINI USE of 10 mature adult head. SPI's energy Free models are built of a polyethylene construction creatin g a strong corrosion free product to provide man years of trouble free operation.

Greater tolerance to operation in dirty conditions; 4. The VP2 uses the same Base, Assembly Nut and O-Ring of the old VP1 making conversion easy. Another plus is the VP2 is more compact than VP1 so it works very well in most of our waterer models - MH,...

Arkfeld waterer element & thermostat replacement. 600 watt x 120 volt heating element with surface mount thermostat included.

Available in Forest Green in stock, other colors such as Ash Grey, Black, Blue, Red & Tan available by special order. If the tank gets a small leak due to unforeseen circumstances, such as a bullet hole, it can be braze welded with a common butane torch...

The connect the Cam & Power Link to the VP124 valve body. You will need 2 per valve assembly. Pride of the Farm Link pin only. #4 on breakdown

Float Arm for the Mira Fount M3360, M3410, M3410-4, M3465 waterer.

Horseshoe shaped 285 Watt element used in all Franklin galvanized waterers.

Corrugated design provides rigidity without bulk when back filled with earth. Unaffected by ground movement due to freezing & thawing. Used to extend the Insulated Earth Tube into warm ground below the frost line & form the Heat Well.

20 Gallon, 36" x 35" x 25" - 1060# All J Models Heavy duty concrete tank (reinforced with rebar and fibermesh Safe, quick and easy to lift and set Epoxy painted trough and outside Chamfered edges Notched top for controlled overflow Brass or plastic water...

Heating element ONLY for the Johnson Concrete Model J360.

Tolerance to water level - you don't have to worry about summer & winter water levels. Weather strip & an insulated sleeve for the supply line come with each unit. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

Corrugated design provides rigidity without bulk when back filled with earth. Unaffected by ground movement due to freezing & thawing. Used to insulate the Heat Well below the frost line, preventing the loss of energy into the frozen ground.

Inside repair kit for Topaz & Megaflow Valve.

Used for joining multiple Earth Tubes. It is a split plastic coupler that fits into the corrugation of the Earth Tube.

SPI 351/352 New Generation Gasket.

B79P Plastic Float with Arm for WFD85 and MFD85 field drinkers. B79P includes:Ref. 14, 15, 16 in parts list.

Tolerance to water level - you don't have to worry about summer & winter water levels. Weather strip & an insulated sleeve for the supply line come with each unit. Livestock can drink out of both flaps at the same time, not always so with a ball closure.

SPI 90 degree elbow for all models.

Robert's Brass cotter key that connects the long arm to the valve body.

White styrofoam triangular disc float only.

3/4" male to female hose used to hook up the water line to the waterer.

This waterer has the same description as the J404 EXCEPT THIS UNIT HAS NO HEAT!

Megaflow Yellow Float Only.

Useful for feeding or watering rabbits, poultry or any type of small animal. Capacity is one-half pint (1 cup). Polyethylene Cage Cup has molded-in hooks to clip onto the side of any type of wire animal cage.

Pride of the Farm Element for electric waterer units.