Agiseek home

Engine Parts Truck Parts For Sale In Stamford

Become a Partner
Exhaust Gasket Replacement for 272293, 270917 and 692236
Prices start at : 5.4 USD / each

Gaskets and O-rings help seal the engine, the air cleaner and other systems against dirt and debris are also common sources of engine problems. The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your...
  •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Fits most 12.5-20 GHP vanguard V-twin horizontal and vertical Briggs & Stratton engines
  • Returnable: 90-Day
  • Product Width (in.): 0.25
  • Part Type: Engine Part
Connecticut
Stamford
1 in. 15 HP 420cc OHV Recoil Start Horizontal Shaft Gas Engine
Prices start at : 306.1 USD / each

LIFAN Power USA's 15 MHP (maximum horsepower) Industrial Grade OHV Gasoline Engine is extremely quiet and dependable. Horizontal output shaft. This engine is built with automotive grade parts and is covered by a 3 years for residential and 1 year commercial...
  •  Splash-lubrication system provides efficiency
  •  Oversized muffler with safety heat shield for quiet operation
  • Recommended Oil Type: SAE10W30
  • Orientation: Horizontal
  • Oil Capacity (oz.): 32.0
  • Product Width (in.): 18
Connecticut
Stamford
Small Engine Carburetor for Most 09P000 Model Engines
Prices start at : 71.15 USD / each

Always refer to the instructions in the operator's manual before making repairs. Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  • Part Type: Engine Part
  • Manufacturer Warranty: One year limited warranty
  • Product Height (in.): 3.375
Connecticut
Stamford
WESTERN TRUCKS AND MACHINERY
Price : CALL

Daf scania volvo mercedes hino trucks and spare parts all shipping arranged containers loaded ect Exporters of quality used trucks and machinery worldwide excavators trucks spare parts
Connecticut
Stamford
16-1/2 in. Long x 12 in. Wide Accessory Bag for 2-wheel Hand Trucks
Prices start at : 27.32 USD / each

Magliner's accessory bag for 2-wheel hand trucks provides a sturdy and convenient place to store small items that would otherwise be hand-carried. Easy-to-access top pockets are sealed with self-adhesive straps.
  •  2 top pockets are 12 in. L x 6 in. W x 2 in. D with 1 self-adhesive strap
  •  Heavy-duty straps tighten bag securely to frame and keeps the bag out of the way
  • Product Depth (in.): 17.5
  • Returnable: 90-Day
  • Used With Equipment Type: Utility
  • Product Height (in.): 3
Connecticut
Stamford
1 in. 9 HP 270cc OHV Recoil Start 2:1 Clutch Gear Reduction Horizontal Shaft Gas Engine
Prices start at : 384.00 USD / each

Threaded output shaft. LIFAN Power USA's 9 MHP (maximum horsepower) Industrial Grade OHV Gasoline Engine is EPA certified, extremely quiet, and ultra-durable. 9 MHP engines are also available with electric start, 18-amp charging system, 2:1 clutch reduction...
  •  77 mm x 58 mm bore/stroke yields 28 ft. lb. max torque
  •  Horizontal shaft design for heavy duty and industrial applications
  •  Fuel-shutoff switch for easy transport and maintenance
  •  Easy-reach recoil starter system with auto decompression for easy starting
  • Recommended Oil Type: SAE 10W-30
  • Product Height (in.): 19
Connecticut
Stamford
Replacement Belt Guard for Select Swisher String Trimmers ST67522BS
Prices start at : 49.95 USD / each

Swisher's Replacement belt guard keeps your trimmer running safely. Used with select Swisher trimmers. Refer to owner's manual for installation instructions.
  •  Keeps the trimmer belt safely covered
  •  1 replacement belt guard
  •  For use with select Swisher trimmer models
  • Returnable: 90-Day
  • Product Width (in.): 13
  • Fits Brands: Swisher
Connecticut
Stamford
Oil Seal
Prices start at : 5.1 USD / each

If your outdoor power equipment is leaking oil, it may be due to a damaged or broken oil seal. Always refer to the instructions in the operator's manual before making repairs. Regular maintenance and changing the oil and oil filter in your outdoor power...
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, changing the oil and oil filter in your outdoor power equipment regularly are crucial to keeping it running smoothly
  • Part Type: Engine Part
  • Product Width (in.): 0.25
  • Returnable: 90-Day
Connecticut
Stamford
Kit-Carb Overhaul
Prices start at : 23.88 USD / each

Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver...
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize product life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  • Part Type: Engine Part
  • Manufacturer Warranty: One year limited warranty
  • Engine Part Type: Carburetor Kit
Connecticut
Stamford
Used Rear Engine Mount
Prices start at : 75.00 USD

Used Rear Engine Mount, Type: Rear Engine Mount
  • Part Number: 05-17915RB
  • Stock Number: 548-10945
  • Type: Rear Engine Mount
Connecticut
Stamford
Used Mack Engine Mount
Prices start at : 125.00 USD

Used Mack Engine Mount, Type: Engine Mount
  • Part Number: 158GB5131M
  • Type: Engine Mount
  • Stock Number: 548-10850
Connecticut
Stamford
20 in. 40-Volt Lawn Mower Side Discharge Accessory
Prices start at : 24.97 USD / each

The Side Discharge works with Ryobi 20 in. Transitioning between mulching, bagging and using the side discharge chute does not require any tools and the innovative design attaches using the bags connection points.
  •  Optimized for Cordless Performance
  •  Optimized for cordless efficiency
  •  Works with: RY40180 and RY40190
  •  Tool-less attachment
  •  Compatible with RY40180 and RY40190 Models
  • Product Height (in.): 10.63 in
Connecticut
Stamford
Small Engine Carburetor for Models 694202, 693909, 692648 and 499617
Prices start at : 33.76 USD / each

Always refer to the instructions in the operator's manual before making repairs. Briggs & Stratton carburetors allow your engine to receive the right amount of gas mixed with air so the engine runs properly.
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts, such as this carburetor that will mix just the right amount of gasoline with air so that the engine runs properly
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Height (in.): 2.781
  • Product Depth (in.): 3.375
  • Returnable: 90-Day
  • Engine Part Type: Carburetor
Connecticut
Stamford
Border Redefiner Replacement Claw
Prices start at : 74.99 USD / each

The ECHO Border Redefiner Replacement Claw is designed for use with the BRD-280 model's 2-cycle engine. This claw is made from durable high-grade steel and features carbide tips for strength and performance.
  •  6-finger blade design
  •  For use with the ECHO BRD-280 border redefiner
  • Fits Brands: ECHO
  • Product Depth (in.): 8.25
  • Product Height (in.): 2.5
  • Part Type: Engine
Connecticut
Stamford
Jackshaft
Prices start at : 42.29 USD / each

Genuine Murray replacement part. This OEM part ensures proper fit and performance to maintain the life of your Murray Equipment.
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Height (in.): 6 in
  • Hub Required: No hub connection available
  • Fits Models: Multiple
  • Engine Part Type: Miscellaneous Part
Connecticut
Stamford
Spark Plug for Platinum
Prices start at : 8.47 USD / each

Briggs & Stratton spark plug resists fouling/corrosion providing easy starting and improved engine performance. The more worn or dirty a spark plug, the more voltage - and the greater the tug on the rewind - required to produce an adequate spark.
  •  Replaces CJ8, RCJ8, J19LM, RJ19LM
  •  Fits all Briggs & Stratton non-OHV engines
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Height (in.): 2.5
  • Part Type: Engine Part
  • Engine Part Type: Spark Plug
Connecticut
Stamford
18-HP 440cc 1 in. Shaft 4-Stroke Overhead Valve Portable Electric Start Engine
Prices start at : 375.00 USD / each

The Duromax XP 18HP is the top of the line powerhouse engine available from Duromax. Perfect for Log Splitters, Pressure Washer, Go Carts, Roto Tillers Caltivators, Mobile Carwash and many more.
  • Product Weight (lb.): 75lb
  • Product Height (in.): 18
  • 1.7 Gal. fuel tank which at half load can run over 3 hours on a single tank of fuel: Yes
  • Product Depth (in.): 21
  • Product Width (in.): 17
  • Part Type: Engine
Connecticut
Stamford
Crank Case Gasket
Prices start at : 25.00 USD / each

Gaskets and O-rings help seal the engine, the air cleaner and other systems against dirt and debris are also common sources of engine problems. The proper gasket for your engine depends on the engine's design; therefore, we recommend that you check your...
  •  Replaces 699168 and 692410 for most 319000 and 31A000 model Briggs & Stratton engines
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  • Product Width (in.): 9
  • Product Depth (in.): 12
  • Product Height (in.): .0125
Connecticut
Stamford
0.5 in. x 0.5 in. x 0.01 in. Sealing Washer
Prices start at : 2.53 USD / each

This washer is used primarily on carburetor float bowls. Refer to the engine model # parts manual for the correct sealing washer#. Its purpose is to seal the bolt to the bowl to prevent gas from leaking from the carburetor.
  •  There are no substitutes when it comes to keeping engine powered equipment healthy to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
  •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
  •  Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
  •  Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
  • Product Height (in.): 0.01
  • Manufacturer Warranty: 1 Year Limited
Connecticut
Stamford
50 in. Throttle Control
Prices start at : 6.98 USD / each

Conduit control is designed to be used as a direct replacement in place of your original equipment Throttle Cable. This replacement Universal Throttle Cable can be used on a variety of outdoor power equipment applications.
  •  Replacement cable and conduit for mowers
  •  50 in. long cable
  • Part Type: Engine Part
  • Product Width (in.): 7.5
  • Returnable: 90-Day
  • Manufacturer Warranty: None
Connecticut
Stamford
196cc Vertical Gas-Powered Lawnmower Engine Motor
Prices start at : 157.38 USD / each

CARB and EPA certified. The Duromax 196cc OHV vertical shaft engine features gas-saving overhead valves for cooler, cleaner performance and longer life. Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficiency.
  •  Durable cast iron cylinder withstands wear and abuse
  •  Lightweight, compact design
  • Engine Displacement (cc): 196
  • Product Depth (in.): 15 in
  • Product Width (in.): 12 in
  • Used With Equipment Type: Chippers/Shredder,Cultivator/ Tiller,Edgers,Field Trimmer,Log Splitter,Powerhead,Pull-Behind Mower,Riding Mower,Walk-Behind Mower
Connecticut
Stamford
2014 Used Freightliner ISX15 Rear Engine Mount
Prices start at : 65.00 USD

Used ISX15 Rear Engine Mount, Type: ISX15 Rear mount

2014

    • Quantity: 1
    • Will Fit Year(s): 2014
    • Year: 2014
    • Part Number: 01-32788-000
    Connecticut
    Stamford
    12-1/2 in. Long x 12 in. Wide Accessory Bag for 2-wheel Hand Trucks
    Prices start at : 29.65 USD / each

    Magliner's accessory bag for 2-wheel hand trucks provides a sturdy and convenient place to store small items that would otherwise be hand-carried. Top flap covers the main opening to prevent rain from entering the bag.
    •  Main pocket is 11 in. D x 9 in. W
    •  Overall size is 12-1/2 in. long x 12 in. wide
    • Fits Models: All Magliner brand hand trucks
    • Fits Brands: Magliner
    • Manufacturer Warranty: One year warranty from date of purchase against defects in workmanship or material.
    • Product Height (in.): 5.5
    Connecticut
    Stamford
    Float Bowl
    Prices start at : 6.38 USD / each

    Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver...

    2

      •  There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton
      •  Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations
      • Product Depth (in.): 2
      • Product Width (in.): 2
      • Manufacturer Warranty: One year limited warranty
      • Product Height (in.): 1.25
      Connecticut
      Stamford
      7 HP Engine
      Prices start at : 359.99 USD / each

      Subaru's 40 years of superior operation and quality that's second to none provides the EX Series engines with unmatched small engine performance levels, new standards in ease of starting and quiet operation, longer engine life expectancy and integration...
      • Engine Type: 4 Cycle
      • Returnable: 30-Day
      • Engine Displacement (cc): 211
      • Product Width (in.): 14.5
      • Certifications and Listings: No Certifications or Listings
      • Dual ball bearing crankshaft support: Yes
      Connecticut
      Stamford
      5/8 in. 3 HP 97.7cc OHV Recoil Start Horizontal Shaft Gas Engine
      Prices start at : 149.00 USD / each

      All LIFAN engines are industrial grade and feature cast-iron sleeves, automotive grade rods, pistons, rings, crankshafts, valve and valve springs. The LIFAN 3 MHP 97.7 cc Horizontal Shaft Gasoline Engine is ideal for cement mixers, roofing elevators,...
      •  Replaces Honda, Briggs, Kohler and other brands; EPA certified
      •  Offers great fuel efficiency, quieter operation and longer life
      •  Ideal for cement mixers, roofing elevators and paint sprayers
      • Fuel Tank Capacity (gallons): 0.4
      • Product Height (in.): 15
      • Brand/Model Compatibility: Universal
      Connecticut
      Stamford
      212cc Horizontal Shaft Gas Engine
      Prices start at : 164.99 USD / each

      The WEN 212cc Horizontal Gas Engine is a multi-purpose engine that can be used for many applications including but not limited to pressure washers, air compressors, trenchers, concrete mixers, concrete saws, mortar mixers, log splitters, go-carts and...
      •  0.9 Gal. fuel tank
      •  Recoil start
      • Recommended Oil Type: 10W-30 Above 32 degree/5W-30 at 32 degree or below
      • Product Weight (lb.): 35lb
      • Oil Capacity (oz.): 16
      • Returnable: 90-Day
      Connecticut
      Stamford