Drip System Tubing

• ✓ For outdoor use only
• ✓ For cold water use only

• Outer Diameter (in.): 0.25
• Manufacturer Warranty: None
• Irrigation System Component: Tubing
• Color Family: Blacks

• ✓ 1/2 in x 100 ft. coil w/ built in pressure compensating emitters
• ✓ Waters uniformly, improving plant health and growth
• ✓ 100 ft. coil with built-in pressure compensating emitters spaced every 18 in.
• ✓ Works like soaker hose - only better

• Tubing Length (ft.): 100
• Assembled Width (in.): 20.0 in

• ✓ Large inner diameter allows installation of long runs of tubing
• ✓ 3-layer Matrix technology for improved strength and flexibility
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day

• Flexible design allows for easy of use: Yes
• Inner Diameter (in.): 0.25
• Tubing Length (ft.): 50
• Outer Diameter (in.): .25
• Assembled Height (in.): 2.25 in
• Manufacturer Warranty: 3 years

• Returnable: 90-Day
• Flexible tubing with UV-resistance: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: None
• Assembled Width (in.): 17.000 in
• Tubing Length (ft.): 50

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Color Family: Blacks
• Inner Diameter (in.): .170
• Manufacturer Warranty: 1 year
• Irrigation System Component: Pipe
• 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution: Yes

• ✓ Suggested operating pressure: 25 PSI
• ✓ Easy to install
• ✓ Flow Rates: 17 GPH per 50 ft(.4 GPH per foot)

• Manufacturer Warranty: 3 Year Warranty
• Drip Line/Tubing Type: Porous Tubing
• Irrigation System Component: Tubing

• ✓ 50 ft. coil with built-in pressure compensating emitters spaced every 18 in.
• ✓ Waters uniformly throughout the planting area, improving plant health and growth
• ✓ Works like soaker hose – only better
• ✓ 50 foot coil

• Inner Diameter (in.): .54
• Assembled Width (in.): 20.40 in

• ✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline
• ✓ Extruded in USA
• ✓ Can be covered with mulch and may used below or above the ground
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Tubing Length (ft.): 500
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Ideal for use in landscape installations and home gardens
• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Color Family: Blacks
• Manufacturer Warranty: 3 Year Warranty
• Irrigation System Component: Tubing

• ✓ Combines the reliability of drip watering with the convenience of a soaker hose
• ✓ Made in USA

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Width (in.): 6 in
• Inner Diameter (in.): 0.25
• Manufacturer Warranty: Limited Lifetime

• ✓ For cold water use only
• ✓ Flexible tubing with UV-resistance
• ✓ For drip irrigation applications
• ✓ Use to distribute water in a drip irrigation system

• Assembled Width (in.): 24 in
• Manufacturer Warranty: None

• ✓ DIG's drip line is made of high quality polyethylene using resin, which has excellent environmental stress crack resistance, burst strength, puncture resistance and long-life expectancy for reliable, long-lasting performance
• ✓ No special tools or glue are needed
• ✓ Designed for placement in both new and existing landscape areas including green-roof areas

• Assembled Width (in.): 19.5 in
• Outer Diameter (in.): .50
• Tubing Length (ft.): 100

• ✓ Larger-diameter tubing allows for more emitters on the same line
• ✓ Use as a dripline and irrigation pipe on ground cover, gardens and flower beds
• ✓ 1-gallon per hour emitters installed every 18 in.
• ✓ Use with other professional quality Toro blue stripe products

• Irrigation System Component: Tubing
• Manufacturer Warranty: 1 year

• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens
• ✓ Emitters drilled every 6 in. waters 0.9 GPH every foot at 25 psi
• ✓ Ideal for slow, deep root watering

0.25

• Outer Diameter (in.): 0.25
• Color Family: Blacks
• Inner Diameter (in.): 0.25

• ✓ Use for groundcover, roses, shrubs, plantings in narrow areas, vegetable gardens or loop around trees
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the line

.50

• Irrigation System Component: Tubing
• Outer Diameter (in.): .50
• Inner Diameter (in.): .50

• ✓ For low volume, subsurface applications; ideal for organic gardening
• ✓ Copper shield technology that naturally protects from root intrusion
• ✓ Standard male and female hose thread ends, with removable end cap
• ✓ Copper shield technology naturally protects from root intrusion

• Pressure Rating: 60
• Assembled Height (in.): 3.0 in

• Inner Diameter (in.): .620
• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day
• Can be buried or left out on the surface in any weather: Yes
• Assembled Width (in.): 18.5 in

• Outer Diameter (in.): 0.25
• Color Family: Blacks
• Manufacturer Warranty: 3 Year Warranty
• Assembled Width (in.): 11 in
• Works with all 1/4 in. barb fittings: Yes
• Tubing Length (ft.): 500

• ✓ 100 ft. coil
• ✓ For use in drip irrigation system installation, expansion, or repair
• ✓ Black color

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Inner Diameter (in.): .165
• Assembled Depth (in.): 8 in

• ✓ Use with emitter tubing and spot watering emitters
• ✓ Pressure rating of 70 psi

• Assembled Depth (in.): 20.3 in
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Irrigation System Component: Tubing
• Pressure Rating: 70 psi

• ✓ Maximum operating pressure: 60 psi
• ✓ Use with DIGs 0.710 compression fittings, color blue and nut lock fittings
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Assembled Height (in.): 4 in
• Assembled Depth (in.): 21 in
• Pressure Rating: 80

• ✓ For outdoor use only
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ Ideal for watering vegetables and closely spaced plants
• ✓ 50 Feet of tubing

• Inner Diameter (in.): 0.25
• Assembled Depth (in.): 3.0 in

• ✓ Flexible design allows for ease of use
• ✓ Maximum recommended operating pressure: 35 psi

• Assembled Depth (in.): 2.5 in
• Irrigation System Component: Tubing
• Tubing Length (ft.): 50
• Pressure Rating: 35 psi

• ✓ Use as the basis for a complete patio system
• ✓ Low density polyethylene construction

• Assembled Width (in.): 6 in
• Manufacturer Warranty: 3 years
• Pressure Rating: 60 psi
• Inner Diameter (in.): 0.25

• ✓ Made from high quality, UV resistant materials
• ✓ 1/2 GPH flow rate from each emitter
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Assembled Depth (in.): 7 in
• Manufacturer Warranty: 3 Years
• Irrigation System Component: Tubing

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ 9 in. pre-inserted emitter spacing

• Drip Line/Tubing Type: Porous Tubing
• Assembled Width (in.): 9 in
• Color Family: Browns / Tans
• Tubing Length (ft.): 100