Drip Irrigation Tubing Irrigation Tubing For Sale In Portland

Vinyl micro tubing is used with the DIG Maverick 12-outlet pressure compensating drip manifold. Attach the tubing to the drip manifold then run lengths to your individual plants up to 10 ft.

Of inch (0.600 in. In addition, their self-flushing mode allows particles to pass harmlessly through, providing reliable performance and a longer life. Each PC drip emitter consists of a cylindrical labyrinth water passage, filter and silicon diaphragm.

Each drip emitter continuously adjusts to varying incoming water pressure, ensuring a constant flow rate along the dripline. For commercial and residential applications, install this drip line above the ground and, if desired, cover it with mulch to blend...

Ideal for vegetable gardens, containers, boxes, row plantings and can even be looped around trees. Drip line has cylinder, labyrinth drip emitters inserted into the micro tubing every 12 in.

It can be used either for extending drip emitters and micro-sprinklers from the main line to the plants area or as the basis of a small patio system. Polyethylene micro tubing is used in the installation of drip irrigation system.

Emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. Just cut, place and connect in any arrangement using Rain Bird 1/2 in.

Drip-A-Long Drip Soaker has drippers spaced at 12 in. Includes fittings. Intervals to combine the reliability of drip watering with the convenience of a soaker hose. It is ideal for watering planters and small plants in rows and borders.

The large inner diameter enables longer runs than smaller-diameter tubing, the same as products used in commercial farms. Drip Tubing is manufactured via a patented process with a 3-layer construction consisting of two strong outer layers and a muscular,...

DIGs drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life. Made with premium quality polyethylene resins, DIGs 0.710 OD drip irrigation poly tubing...

To place watering devices near plants, add 1/4 in. Tubing with 1/4 in. Connect tubing sections and 1/2 in. Kink resistant materials help provide dependable water flow. Barbed or compression fittings.

Drill Soaker Tubing is easy to install. Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens. The tubing has drilled pores every 6 in. To provide slow flow for deep root watering.

1 GPH dripline is a pressure compensating dripline with drip emitters spaced every 18 In. delivering equal flow over the length of dripline. Each PC drip emitter inside the dripline consists of a cylinder with a labyrinthine water passage, filter and...

Ideal for vegetable gardens, containers, boxes, row plantings and can even be looped around trees. Drip line has cylinder, labyrinth drip emitters inserted into the micro tubing every 9 in.

Emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. The emitters are designed for clog-resistant flow. Just cut, place and connect in any arrangement using Rain Bird 1/2 in.

The micro tubing is manufactured with an antioxidant and contains 2% concentrated Carbon Black to protect the finished product from thermal degradation. The micro tubing is used in a wide range of drip irrigation layouts, including being used as feeder...

Ideal for vegetable gardens, containers, boxes, row plantings and can even be looped around trees. Drip line has cylinder, labyrinth drip emitters inserted into the micro tubing every 9 in.

Drip line has cylinder, labyrinth emitters inserted inside the tubing every 12 in. This drip line is ideal for gardens, row plantings and can even be wrapped around trees. DIG's SH50 drip line is an extremely versatile drip irrigation method that will...

Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions. Swing Pipe Assembly is a flexible swing assembly that connects sprinkler heads to lateral pipes.

Use for flexible lines for air, water, liquids, beverages and gases as well as drain lines for air conditioners and dehumidifiers where higher pressure or tubing wall stability is required.

Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. See through design allows for visual flow.

Tubing with Emitters is a professional-quality drip hose made of high-quality polyethylene. Use it with other Blue Stripe Drip products to create a custom irrigation layout that is specific to your landscape or garden.

Flexible PVC Pipe is great for repairs and serves as routing pipe in hard-to-reach areas. Since it glues into standard PVC fittings, it is easy to install. This Orbit 1/2 in.

Use for flexible lines for air, water, liquids, beverages and gases as well as drain lines for air conditioners and dehumidifiers where higher pressure or tubing wall stability is required.

DIG's drip irrigation poly tubing coil has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life. Made with premium quality polyethylene resins, DIG's 0.700 OD drip irrigation poly tubing...

Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. See through design allows for visual flow.

Drip-Watering Hose is a professional-quality hose that's ideal for use as a supply line to any low-flow or drip-watering device. Tubing for smaller, more closely spaced plants. It can be buried in the soil or exposed to sun, rain and frost without deterioration.

Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. See through design allows for visual flow.