Drip Irrigation Tubing Irrigation Tubing For Sale In Peoria

• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings
• ✓ Extruded in USA
• ✓ Large labyrinth water passage and filter intake area in each dripper are continuously flushed by the water flow to reduce clogging
• ✓ Manufactured from linear low-density polyethylene resin with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Depth (in.): 17.5 in

• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Total of 65 1 GPH PC drip emitters per 100 ft.

• Pressure Rating: 50 psi
• Color Family: Browns / Tans

9 in

• Assembled Depth (in.): 9 in
• Returnable: 90-Day
• Assembled Width (in.): 3 in
• Assembled Height (in.): 9 in
• Irrigation System Component: Tubing
• Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting: Yes

• ✓ May be laid above or below ground
• ✓ Use as the basis for a complete patio system
• ✓ Use as a primary feeder line from a 1/2 in. poly-tube
• ✓ Low density polyethylene construction

• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ 100 ft. coil
• ✓ 0.255 in. O.D., 0.165 in. I.D
• ✓ 25 to 30 psi recommended operating pressure
• ✓ Use with 1/4 in. barbed fittings and stakes

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Pressure Rating: 70 psi

• ✓ Intended for underground installation
• ✓ Copper shield technology naturally protects from root intrusion
• ✓ For low volume, subsurface applications
• ✓ Pressure compensating for end-to-end watering uniformity

• Assembled Depth (in.): 18.0 in
• Irrigation System Component: Tubing

• ✓ Black in color
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.

• Returnable: 90-Day
• Drip Line/Tubing Type: Porous Tubing
• Color Family: Blacks
• Assembled Depth (in.): 3.0 in

• ✓ 100 mil thick
• ✓ Operating pressure: 80 psi
• ✓ Note: Product may vary by store.
• ✓ Manufacturer Warranty

• Outer Diameter (in.): .5
• Pressure Rating: 80

• ✓ Standard internal dimension is compatible with Eco-Lock and poly insert fittings (sold separately)
• ✓ Burst and freeze resistant
• ✓ Use to build and maintain a sprinkler system
• ✓ For non-mainline cold water outdoor irrigation connections only
• ✓ For outdoor cold water use only

• Color Family: Greens

• ✓ Simple to install Used with 1/4 inch micro tubing and 1/2 inch drip tubing using 1/4 inch barbs fittings
• ✓ Used in conjunction with 1/4 in. drippers
• ✓ Flow Rates: 17 GPH per 50 ft(.4 GPH per foot)

• Returnable: 90-Day
• Assembled Width (in.): 7.5 in
• Assembled Height (in.): 2.25 in

• ✓ Note: product may vary by store
• ✓ Helps makes sprinkler installation quick and easy with no cutting, glue or clamps required

• Tubing Length (ft.): .67
• Manufacturer Warranty: 1 YR
• Assembled Depth (in.): 10.75 in
• Returnable: 90-Day

• ✓ Black in color
• ✓ Flexible tubing with UV-resistance
• ✓ Use to distribute water in a drip irrigation system
• ✓ For outdoor use only

• Color Family: Blacks
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• Assembled Width (in.): 20 in
• 1/2 in. x 50 ft. linear low-density polyethylene material: Yes
• Returnable: 90-Day
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Color Family: Blacks

• Irrigation System Component: Tubing
• Outer Diameter (in.): .7
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): .495
• Manufacturer Warranty: 1 year
• Inside diameter: 0.495 in. ± 0.005 in.; Outside diameter: 0.70 in.: Yes

• ✓ For cold water use only
• ✓ Durable construction provides for many years of use
• ✓ For outdoor use only

• Irrigation System Component: Tubing
• Manufacturer Warranty: None
• Outer Diameter (in.): 0.5

• ✓ Use to distribute water to drippers, misters, and low volume sprinklers
• ✓ UV-resistant
• ✓ For outdoor use only

• Color Family: Browns / Tans
• Assembled Width (in.): 7.000 in
• Manufacturer Warranty: None

• Product Length (ft.): 50
• Maximum Working Temperature (F): 150
• Actual outside diameter (in.): .312
• Material: Vinyl
• Temperature range +25°F to +150°F: Yes
• Product Height (in.): 9.5

• ✓ Made in North America
• ✓ Use as flexible drain line

• Pipe Size: 1/2"
• Maximum Working Temperature (F): 150
• Pipe or Fitting Product Type: Pipe & Tubing
• Product Height (in.): 14

• Black color: Yes
• Product Weight (lb.): 3.3lb
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Application: Sewer & Drain,Water Supply
• Minimum working temperature (F): 25
• Certifications and Listings: No Certifications or Listings

• ✓ Not for under hood application
• ✓ Weather resistant
• ✓ Black color

• Pipe & Tubing Product Type: Specialty
• Certifications and Listings: No Certifications or Listings
• Pipe Size: 3/8"

• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• ✓ Use with DIG's 0.700 compression fittings, color black, and Nut Lock fittings
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

.50

• Tubing Length (ft.): 100
• Inner Diameter (in.): .50
• Outer Diameter (in.): .50

• Product Depth (in.): 5
• Maximum working pressure (psi): 35
• Features: Flexible,Lead Free
• Pipe Size: 3/4"
• Product Weight (lb.): 9.4lb
• Temperature range +25°F to +150°F: Yes

• ✓ Ideal for repairs to piping systems
• ✓ Flexibility means fewer fittings and joints in piping
• ✓ Great for repairs

• Assembled Width (in.): 1.125 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: None

• Maximum working pressure (psi): 5
• Actual inside diameter (in.): .250
• Minimum working temperature (F): -40
• Certifications and Listings: No Certifications or Listings
• Material: Rubber
• Product Height (in.): .375

• ✓ Made with polyester braided reinforced PVC non-toxic material
• ✓ Excellent resistance to acids, alkalis and many solvents
• ✓ Temperature range +25°F to +150°F

• Product Width (in.): 1.13
• Application: Sewer & Drain,Water Supply
• Product Weight (lb.): .66lb

• Product Width (in.): 11
• Features: Flexible,Lead Free
• Black color: Yes
• Application: Sewer & Drain,Water Supply
• Certifications and Listings: No Certifications or Listings
• Pipe or Fitting Product Type: Pipe & Tubing

• ✓ Flexible design allows for easy of use
• ✓ Made from durable materials for long life in the landscape
• ✓ 50 ft. L

• Pressure Rating: 60 psi
• Irrigation System Component: Tubing
• Assembled Depth (in.): 5.5 in