Drip Irrigation Tubing Irrigation Tubing For Sale In Laredo

• ✓ Resistant to cracking, heat, UV rays and chemicals
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected
• ✓ Produced using dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Bending radius: 1 ft.

• Assembled Height (in.): 5 in
• Irrigation System Component: Tubing

• ✓ 12 in. pre-inserted emitter spacing
• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone

• Returnable: 90-Day
• Tubing Length (ft.): 100
• Color Family: Blacks

• ✓ For cold water use only
• ✓ Made from a flexible PE blend material
• ✓ For drip irrigation applications

• Assembled Depth (in.): 3.000 in
• Assembled Width (in.): 7.000 in
• Irrigation System Component: Tubing

• ✓ 100 ft. coil
• ✓ Use with 1/4 in. barbed fittings and stakes

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Assembled Depth (in.): 8 in
• Tubing Length (ft.): 100
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Drip line produces a flow rate of 1 GPH per each drip emitter at 10 to 45 PSI
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the line
• ✓ Made to hydrate large outdoor spaces and extend drip lines
• ✓ Dripper adjusts to water pressure for a constant rate of flow

• Returnable: 90-Day
• Assembled Width (in.): 18 in

• Returnable: 90-Day
• Color Family: Blacks
• Assembled Depth (in.): 10.75 in
• Assembled Width (in.): 2.13 in
• Inner Diameter (in.): .495
• Cushions the sprinkler to help prevent damage: Yes

• ✓ Brown UV-resistant tubing designed for below or above ground use
• ✓ 50 ft. coil

• Assembled Depth (in.): 7.8 in
• Tubing Length (ft.): 50
• Irrigation System Component: Tubing
• Outer Diameter (in.): .22

• ✓ Use with 1/4 in. barbed fittings
• ✓ Interchangeable with other manufacturers' brands of the same O.D. size micro tubing

• Manufacturer Warranty: 3 Year Warranty
• Assembled Depth (in.): 11 in
• Irrigation System Component: Tubing
• Assembled Height (in.): 5.5 in

• ✓ The brown finish easily blends in with your soil and landscape
• ✓ Brown color blends in with the landscape
• ✓ Connects to 1/2 in. poly tubing mainline using a 1/4 in. barb fitting
• ✓ 100 ft. L

• Tubing Length (ft.): 100
• Assembled Height (in.): 3 in

• ✓ Glues to standard PVC fittings for easy installation
• ✓ Flexible pipe means fewer fittings required and joints to glue in piping systems
• ✓ Flexibility means fewer fittings and joints in piping

• Returnable: 90-Day
• Outer Diameter (in.): 0.75
• Assembled Height (in.): 1.125 in

• ✓ Flexible tubing with UV-resistance
• ✓ Works with most new or existing drip systems.
• ✓ For cold water use only

• Assembled Width (in.): 17.000 in
• Returnable: 90-Day
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Unique Micro-Porous design creates an ultra-tight connection
• ✓ 70 psi

• Assembled Height (in.): 14.6 in
• Irrigation System Component: Tubing
• Returnable: 90-Day
• Color Family: Browns / Tans

• ✓ Non-toxic FDA grade compound
• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Temperature range +25°F to +150°F

• Product Height (in.): 1.02
• Pipe or Fitting Product Type: Pipe & Tubing
• Minimum working temperature (F): 25

.375

• Returnable: 90-Day
• Suitable for use with liquids, chemicals and gases: Yes
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Product Height (in.): .375
• Product Width (in.): .375
• Maximum Working Temperature (F): 150

• ✓ For use with hose barbs and clamps
• ✓ Clear with polyester reinforcement
• ✓ Temperature range +25°F to +150°F
• ✓ Suitable for use with liquids, chemicals and gases

• Maximum Working Temperature (F): 150
• Pipe Size: 1/4"

• ✓ Flexible design
• ✓ NSF/IAPMO Compliant
• ✓ Non-toxic FDA compound

• Product Length (ft.): 10
• Actual inside diameter (in.): 1
• Minimum working temperature (F): 0

• ✓ Suitable for use with liquids, chemicals and gases
• ✓ Non-toxic FDA grade compound

• Product Length (ft.): 10
• Pipe Size: 3/8"
• Pipe & Tubing Product Type: Specialty
• Product Height (in.): .312

17 in

• ✓ Works with any typical spray or rotating sprinkler with a male or female inlet
• ✓ Use with Toro funny pipe fittings (not included)

• Pressure Rating: 120
• Assembled Depth (in.): 17 in
• Assembled Width (in.): 17 in
• Manufacturer Warranty: 1 year

• ✓ Allows for more accurate positioning of sprinklers
• ✓ Allows for more accurate positioning and repositioning of sprinklers
• ✓ 50 ft. coil
• ✓ 0.49 in. (1,24 cm) I.D.

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 50

• ✓ Clear with polyester reinforcement
• ✓ Higher pressure ratings
• ✓ Non-toxic FDA grade compound

• Maximum working pressure (psi): 200
• Pipe or Fitting Product Type: Pipe & Tubing
• Product Depth (in.): 5

• Pipe Size: 5/8"
• Actual inside diameter (in.): .625
• Minimum working temperature (F): 25
• Use as flexible drain line: Yes
• Certifications and Listings: No Certifications or Listings
• Pipe or Fitting Product Type: Pipe & Tubing

• ✓ Bagged hoses include washers
• ✓ Color coded for easy identification
• ✓ Kink resistant

• Product Depth (in.): 3
• Actual outside diameter (in.): .63
• Maximum Working Temperature (F): 200

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Temperature range +25°F to +150°F: Yes
• Maximum Working Temperature (F): 150
• Material: Vinyl
• Application: Sewer & Drain,Water Supply
• Pipe & Tubing Product Type: Specialty

• ✓ Blue fittings work with a 0.710 O.D. (outside diameter) poly tubing
• ✓ Light and compact design

• Inner Diameter (in.): .50
• Drip Irrigation Fitting Type: Elbow
• Product Width (in.): 1
• Fitting Type: Compression Fittings

• Pipe or Fitting Product Type: Pipe & Tubing
• Actual inside diameter (in.): .170
• Certifications and Listings: No Certifications or Listings
• Maximum working pressure (psi): 140
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Product Width (in.): .250

• Tubing Size: Fits All Tubing Sizes
• Package Quantity: 5
• Irrigation System Component: Drip Irrigation Emitter
• Maximum Gallons Per Minute: .22
• Gallons per Hour: 12
• Color Family: Blacks

• Maximum working pressure (psi): 45
• Made in North America: Yes
• Pipe & Tubing Product Type: Specialty
• Product Depth (in.): 240
• Product Height (in.): .500
• Actual inside diameter (in.): .375