Drip Irrigation Tubing Irrigation Tubing For Sale In Georgia

• ✓ For use with spot watering emitters and other drip devices
• ✓ For use in drip irrigation system installation, expansion, or repair

• Outer Diameter (in.): .255
• Tubing Length (ft.): 100
• Pressure Rating: 70 psi
• Assembled Width (in.): 8 in

• ✓ Can be covered with mulch and may used below or above the ground
• ✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline

• Color Family: Browns / Tans
• Inner Diameter (in.): 0.50
• Tubing Length (ft.): 100
• Manufacturer Warranty: 3 Years

• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the line
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Total of 65 1 GPH PC drip emitters per 100 ft.

• Assembled Height (in.): 4.75 in
• Tubing Length (ft.): 100

• ✓ Designed for short runs up to a maximum of 30 feet and with a flow rate of .4 GPH per ft., the 1/4 inch porous soaker hose can be use for watering flowerbeds, potted plants & vegetable gardens
• ✓ Suggested operating pressure: 25 PSI
• ✓ Simple to install Used with 1/4 inch micro tubing and 1/2 inch drip tubing using 1/4 inch barbs fittings

• Pressure Rating: 25 psi
• Assembled Height (in.): 2.25 in
• Drip Line/Tubing Type: Porous Tubing

• Tubing Length (ft.): 250
• Assembled Depth (in.): 23 in
• Assembled Height (in.): 6 in
• Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .50

• ✓ Not for mainline use
• ✓ Standard internal dimension is compatible with Eco-Lock and poly insert fittings (sold separately)
• ✓ Flexible construction for installation configurability and simplified maintenance

• Assembled Height (in.): 5.0 in
• Manufacturer Warranty: None
• Irrigation System Component: Pipe

• ✓ Manufacturer Warranty
• ✓ 100 mil thick

• Color Family: Blacks
• Assembled Height (in.): 2 in
• Outer Diameter (in.): .5
• Tubing Length (ft.): 2

• ✓ Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Resistant to cracking, heat, UV rays and chemicals
• ✓ Maximum operating pressure: 60 psi

.50

• Outer Diameter (in.): .50
• Assembled Width (in.): 21 in
• Inner Diameter (in.): .50

• ✓ Allows for more accurate positioning and repositioning of sprinklers
• ✓ 50 ft. coil
• ✓ Helps minimize repairs and prolongs sprinkler life
• ✓ Linear low-density polyethylene material

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Outer Diameter (in.): .5

• ✓ Inside diameter: 0.495 in. ± 0.005 in.; Outside diameter: 0.70 in.
• ✓ Rated to 120 psi

• Outer Diameter (in.): .7
• Assembled Depth (in.): 17 in
• Returnable: 90-Day
• Manufacturer Warranty: 1 year

• ✓ 100 ft. L
• ✓ Anti-clogging dual outlet emitters
• ✓ 1/2 GPH flow rate from each emitter

• Irrigation System Component: Tubing
• Outer Diameter (in.): .25
• Pressure Rating: 25 psi

• ✓ 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.
• ✓ Flexible for easy installation
• ✓ Kink resistant materials help provide dependable water flow

• Pressure Rating: 70 psi
• Assembled Width (in.): 20.3 in
• Color Family: Blacks

• ✓ Designed to work with Toro Blue Stripe drip-irrigation products
• ✓ Conforms to A.S.A.E. standards for minimum inside diameter and wall thickness
• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins

• Assembled Height (in.): 4.5 in
• Returnable: 90-Day
• Assembled Width (in.): 17 in

• ✓ Made from UV resistant materials for a long life in the landscape
• ✓ Flexible design allows for ease of use

• Assembled Width (in.): 5 in
• Returnable: 90-Day
• Outer Diameter (in.): .125
• Manufacturer Warranty: 3 Year Warranty

• Manufacturer Warranty: 1 YR
• Tubing Length (ft.): 50
• Pressure Rating: 60 psi
• Assembled Width (in.): 18.5 in
• Inner Diameter (in.): .62
• Returnable: 90-Day

• ✓ Up to 30% more flexible than competitors
• ✓ Operating pressure: 80 psi

• Returnable: 90-Day
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Color Family: Blacks
• Inner Diameter (in.): .75

• Non-toxic FDA grade compound: Yes
• Certifications and Listings: No Certifications or Listings
• Returnable: 90-Day
• Product Length (ft.): 20
• Minimum working temperature (F): 25
• Pipe Size: 3/8"

• ✓ Brown UV-resistant tubing designed for below or above ground use
• ✓ 1/4 in x 50 ft coil w/ built in pressure compensating emitters
• ✓ Emitters feature two outlet holes, one on either side of tubing (180° apart)
• ✓ Attach to 1/2" Drip tubing with 1/4" barbed fittings; compatible with most 1/4" fittings

• Irrigation System Component: Tubing
• Color Family: Blacks

• Maximum Working Temperature (F): 150
• Actual inside diameter (in.): .500
• Pipe & Tubing Product Type: Specialty
• Actual outside diameter (in.): .750
• Minimum working temperature (F): 25
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• Pipe Size: 1/2"
• Material: Vinyl
• Product Depth (in.): 5
• Minimum working temperature (F): 25
• Returnable: 90-Day
• Temperature range +25°F to +150°F: Yes

• ✓ For use with hose barbs and clamps
• ✓ Made in North America
• ✓ Suitable for use as dishwasher and washing machine drain
• ✓ Temperature range +25°F to +150°F

• Actual inside diameter (in.): 1
• Product Weight (lb.): 13.2lb

• ✓ Suitable for use as windshield wiper vacuum tubing
• ✓ Not for under hood application
• ✓ Temperature range +25°F to +150°F

• Minimum working temperature (F): 25
• Application: Sewer & Drain,Water Supply
• Actual inside diameter (in.): .125

• Pipe & Tubing Product Type: Specialty
• Product Depth (in.): 120
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Product Weight (lb.): 4.7lb
• Certifications and Listings: IAPMO Certified
• Features: Flexible,Lead Free

• ✓ Flexible pipe means fewer fittings required and joints to glue in piping systems
• ✓ Easy to install

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Returnable: 90-Day
• Assembled Depth (in.): 24.0 in
• Assembled Width (in.): 0.875 in

• ✓ For use with hose barbs and clamps
• ✓ Temperature range +25°F to +150°F

• Maximum working pressure (psi): 250
• Product Height (in.): .440 in
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Certifications and Listings: No Certifications or Listings

• ✓ Total satisfaction policy
• ✓ Flow rates: 0.9 GPH every 18 in. (emitter spacing)
• ✓ 0.63 in. O.D., 0.54 in. I.D.
• ✓ Combine up to five 50 ft. coils to extend your watering coverage up to 250 ft.
• ✓ For low volume, subsurface applications; ideal for organic gardening

• Irrigation System Component: Tubing

14

• Pipe Size: 3/8"
• Non-toxic FDA grade compound: Yes
• Product Width (in.): 14
• Actual outside diameter (in.): .375
• Product Height (in.): 14
• Maximum Working Temperature (F): 150