Drip Irrigation Tubing Irrigation Tubing For Sale In Florida

• ✓ Note: product may vary by store
• ✓ Black in color

• Color Family: Blacks
• Tubing Length (ft.): 50
• Assembled Height (in.): 9 in
• Returnable: 90-Day

• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow at a wide range of operating pressures and over a long length of drip line
• ✓ Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
• ✓ No special tools or glue are needed
• ✓ Ideal for installation on difficult terrain such as on slopes, in oddly shaped areas and on windy sites

• Returnable: 90-Day
• Color Family: Blacks

23 in

• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Can be covered with mulch and used below or above the ground
• ✓ Dripline dimension is 0.600 I.D. x 0.700 O.D.

• Assembled Width (in.): 23 in
• Returnable: 90-Day
• Assembled Depth (in.): 23 in

• ✓ For drip irrigation applications
• ✓ Works with most new or existing drip systems
• ✓ Use to distribute water in a drip irrigation system

24 in

• Assembled Depth (in.): 24 in
• Assembled Width (in.): 24 in
• Irrigation System Component: Tubing

• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 228 GPH (3.8 GPM)
• ✓ Can be installed above or below ground
• ✓ Maximum operating pressure: 60 psi

• Assembled Height (in.): 4 in
• Inner Diameter (in.): .50
• Tubing Length (ft.): 100

• ✓ 60 psi at 90°
• ✓ UV inhibiting compound for durability
• ✓ Use as a primary feeder line from a 1/2 in. poly-tube

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Pressure Rating: 60 psi
• Assembled Height (in.): 2.5 in

• ✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline
• ✓ Accepts standard black insert, 0.700 compression fittings, brown barbed fittings or DIG Nut Lock fittings

• Assembled Depth (in.): 24 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Outer Diameter (in.): .50
• Manufacturer Warranty: 3 years

.5

• ✓ Total Satisfaction Policy
• ✓ Versatile EZ pipe creates flexible connections for your sprinklers

• Inner Diameter (in.): .5
• Outer Diameter (in.): .5
• Irrigation System Component: Tubing
• Assembled Height (in.): 15 in

• ✓ Made in USA
• ✓ 50 ft. drip soaker ideal for watering planters and small plants in rows and borders

• Color Family: Blacks
• Inner Diameter (in.): 0.25
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Width (in.): 6 in

• ✓ Great for repairs
• ✓ Ideal for repairs to piping systems
• ✓ Glues to standard PVC fittings

• Color Family: Blacks
• Manufacturer Warranty: None
• Assembled Width (in.): 1.125 in

• ✓ Temperature range +25°F to +150°F
• ✓ Suitable for use with liquids, chemicals and gases

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Maximum Working Temperature (F): 150
• Returnable: 90-Day
• Maximum working pressure (psi): 40

• Product Height (in.): .750
• Product Weight (lb.): .95lb
• Returnable: 90-Day
• Product Depth (in.): 120
• Reinforced synthetic rubber compound: Yes
• Certifications and Listings: No Certifications or Listings

• Material: Vinyl
• Product Weight (lb.): .2lb
• Product Depth (in.): 120
• Pipe or Fitting Product Type: Pipe & Tubing
• Minimum working temperature (F): 25
• Application: Sewer & Drain,Water Supply

10

• Application: Sewer & Drain,Water Supply
• Actual inside diameter (in.): .0625
• Product Height (in.): 10
• Product Depth (in.): 10
• General purpose grade: Yes
• Pipe Size: 1/8"

7.5 in

• Irrigation System Component: Tubing
• Suggested operating pressure: 25 PSI: Yes
• Color Family: Blacks
• Assembled Depth (in.): 7.5 in
• Assembled Width (in.): 7.5 in
• Outer Diameter (in.): 0.25

• ✓ Elasticity allows for use in a variety of applications
• ✓ Flexible in low temperatures

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Product Height (in.): .375
• Pipe or Fitting Product Type: Pipe & Tubing
• Pipe & Tubing Product Type: Specialty

• ✓ For use with hose barbs and clamps
• ✓ Non-toxic FDA grade compound

• Returnable: 90-Day
• Product Length (ft.): 10
• Maximum working pressure (psi): 25
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• ✓ Handles a wide variety of chemicals, gases and liquids
• ✓ Temperature range +25°F to +150°F

• Pipe Size: 7/8"
• Pipe or Fitting Product Type: Pipe & Tubing
• Product Depth (in.): 24
• Maximum working pressure (psi): 100

• ✓ 70 psi pressure rating
• ✓ Use to run water from valve or faucet to planting area
• ✓ Black color
• ✓ 15% thicker wall vs. other leading brands

• Returnable: 90-Day
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ 100 ft. length
• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ No special tools or glues necessary for installation

• Inner Diameter (in.): 0.25
• Returnable: 90-Day
• Assembled Height (in.): 9 in

• ✓ For use with hose barbs and clamps
• ✓ Abrasion and kink resistant

• Features: Flexible,Lead Free
• Product Width (in.): 1.375
• Certifications and Listings: No Certifications or Listings
• Product Length (ft.): 6

• ✓ Pressure regulator helps provide even and consistent water flow throughout the entire system.
• ✓ System can water 3 to 4 planters depending on size and spans 12 ft.
• ✓ Complete kit perfect for watering potted plants, hanging baskets and vegetable gardens

• Kit Type: Drip Irrigation Kit
• Number of pieces included: 29
• Irrigation System Component: Kit

• ✓ Temperature range +25°F to +150°F
• ✓ Made in North America

• Pipe or Fitting Product Type: Pipe & Tubing
• Certifications and Listings: No Certifications or Listings
• Product Height (in.): .250
• Actual inside diameter (in.): .170

• ✓ 50 ft. L
• ✓ Easily installed
• ✓ Works with all 1/4 in. barb fittings

• Pressure Rating: 60 psi
• Tubing Length (ft.): 50
• Assembled Depth (in.): 5.5 in

• Product Length (in.): 1.25 in
• Pressure Rating: 60
• Returnable: 90-Day
• Material: ABS Plastic
• Drip Irrigation Fitting Type: Adapter
• Will not suppress water flow: Yes

• ✓ Increases versatility of an irrigation system
• ✓ Constructed of UV resistant materials for long life in the landscape
• ✓ For use with 1/2 in. poly tubing with 0.700 O.D. (outside diameter)
• ✓ 3/4 in. FHT x 1/2 in compression tee

• Outer Diameter (in.): .75
• Product Height (in.): 3.75

• Drip Irrigation Fitting Type: Tee
• Fitting Type: Barb Fittings
• Package Quantity: 10
• Product Length (in.): 4 in
• Product Height (in.): 5.5
• Pressure Rating: 30