Drip Irrigation Tubing Irrigation Tubing For Sale In British Columbia

• ✓ Intended for underground installation
• ✓ Copper shield technology naturally protects from root intrusion
• ✓ Standard male and female hose thread ends, with removable end cap
• ✓ Pressure compensating for end-to-end watering uniformity

• Assembled Width (in.): 18.0 in
• Returnable: 90-Day

• ✓ Pressure-compensating emitters water plants evenly from beginning to end of tubing throughout the planting area
• ✓ Built-in 1 GPH emitters spaced 12 in. apart

• Assembled Depth (in.): 7.8 in
• Assembled Height (in.): 1.9 in
• Tubing Length (ft.): 50
• Pressure Rating: 70 psi

• ✓ Designed for placement in both new and existing landscape areas including green-roof areas
• ✓ Used for commercial and residential applications

• Manufacturer Warranty: 3 years
• Color Family: Blacks
• Assembled Depth (in.): 19.5 in
• Inner Diameter (in.): 0.50

• ✓ 1/4 Inch wide
• ✓ 50 ft length of tubing
• ✓ Made from flexible PE blend material

• Tubing Length (ft.): 50
• Outer Diameter (in.): 0.25
• Irrigation System Component: Tubing

• Designed to work with Toro Blue Stripe Drip irrigation products: Yes
• Inner Diameter (in.): .62
• Tubing Length (ft.): 50
• Manufacturer Warranty: 1 YR
• Assembled Depth (in.): 18.5 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Compatible with most brands of 1/4 in. Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays
• ✓ Can be used to run water to emitter tubing
• ✓ For use with spot watering emitters
• ✓ 70 psi

• Assembled Depth (in.): 10.5 in
• Assembled Width (in.): 10.4 in

• ✓ For use above or below ground
• ✓ Use with DIG Corp 1/4 in. barb fittings

• Assembled Height (in.): 3 in
• Manufacturer Warranty: 3 year
• Pressure Rating: 60 psi
• Inner Diameter (in.): 0.25

• ✓ Waters uniformly, improving plant health and growth
• ✓ 0.9 GPH (3.4 lph) flow per emitter
• ✓ Works like soaker hose - only better
• ✓ 100 ft. coil with built-in pressure compensating emitters spaced every 18 in.
• ✓ Works like soaker hose – only better

• Outer Diameter (in.): .63

• ✓ Resistant to cracking, heat, UV rays and chemicals
• ✓ Dimensions: 100 ft. with 0.620 ID x 0.710 OD
• ✓ Produced using dows 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Irrigation System Component: Tubing
• Color Family: Blacks
• Returnable: 90-Day

• ✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline
• ✓ Extruded in USA

• Manufacturer Warranty: 3 Years
• Assembled Depth (in.): 17.5 in
• Returnable: 90-Day
• Inner Diameter (in.): 0.50

• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Each emitter continuously adjusts to varying incoming water pressures ranging from 10 to 45 PSI, ensuring a constant flow rate regardless of elevation along the dripline
• ✓ Drip line produces a flow rate of 1 GPH per each drip emitter at 10 PSI to 45 PSI
• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays

• Pressure Rating: 10-50 PSI; recommended operating pressure: 25 PSI
• Irrigation System Component: Tubing

• ✓ For outdoor use only
• ✓ Easy to install
• ✓ For cold water use only
• ✓ Routes pipes in hard-to-reach areas
• ✓ Great for repairs

• Inner Diameter (in.): 0.5

• ✓ Linear low-density polyethylene tubing is made from high-grade polyethylene resins
• ✓ Dimensions = .710 OD x .620 ID
• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration

• Tubing Length (ft.): 100
• Pressure Rating: 60 psi
• Drip Line/Tubing Type: Drip or Emitter Line Tubing

• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens
• ✓ For outdoor use and cold water only
• ✓ A single 1/4 in. soaker line should not exceed 15 ft.

• Assembled Depth (in.): 7.000 in
• Irrigation System Component: Tubing
• Outer Diameter (in.): 0.25

• ✓ For easy installation or repositioning of sprinkler heads in hard-to-reach areas
• ✓ Supports 1/2 in. connections

• Assembled Width (in.): 12.0 in
• Color Family: Blacks
• Pressure Rating: 120
• Assembled Height (in.): 2.0 in

• ✓ 24 in. L
• ✓ Textured surface makes product easier to handle
• ✓ Quick and easy installation lowers material and labor costs
• ✓ Operating temperature: 110°F

• Pressure Rating: 80
• Irrigation System Component: Tubing

• ✓ No need to blow out or drain in winter conditions
• ✓ Enjoy less work in the garden
• ✓ Can water up to 60 containers
• ✓ Additional emitters sold separately

• Manufacturer Warranty: No
• Returnable: 90-Day

• ✓ Can be installed above or below ground
• ✓ Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
• ✓ Ideal for use in landscape installations and home gardens
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Returnable: 90-Day
• Assembled Height (in.): 5 in

• ✓ Non-toxic FDA grade compound
• ✓ Made in North America

• Application: Sewer & Drain,Water Supply
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Maximum working pressure (psi): 55
• Product Depth (in.): 240

.875

• Pipe Size: 5/8"
• Minimum working temperature (F): 25
• Higher pressure ratings: Yes
• Actual inside diameter (in.): .625
• Product Height (in.): .875
• Product Width (in.): .875

• ✓ Minimum 2% carbon black UV inhibitor added for resistance to sunlight deterioration
• ✓ Large inner diameter allows installation of long runs of tubing

• Assembled Depth (in.): 12.000 in
• Inner Diameter (in.): .62
• Irrigation System Component: Tubing
• Assembled Height (in.): 15 in

• ✓ Saves water by delivering water right where it is needed most, at the plant root zone
• ✓ No special tools or glues necessary for installation

• Assembled Width (in.): 3 in
• Pressure Rating: 25 psi
• Inner Diameter (in.): 0.25
• Manufacturer Warranty: 3 year warranty

• ✓ 50 ft. L
• ✓ Use with DIG Maverick 12-outlet drip manifolds (Models PC1202, PC1204, PC12100 and PC14100)

• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Assembled Depth (in.): 2.5 in
• Irrigation System Component: Tubing

• ✓ Clear with polyester reinforcement
• ✓ Temperature range +25°F to +150°F

• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Actual inside diameter (in.): .375
• Product Depth (in.): 120
• Application: Sewer & Drain,Water Supply

• Pipe & Tubing Product Type: Specialty
• Product Length (ft.): 50
• Pipe or Fitting Product Type: Pipe & Tubing
• Certifications and Listings: No Certifications or Listings
• Actual inside diameter (in.): 1
• Maximum Working Temperature (F): 150

• Suitable for use as dishwasher and washing machine drain: Yes
• Minimum working temperature (F): 25
• Material: Vinyl
• Product Height (in.): 18
• Actual inside diameter (in.): 1
• Returnable: 90-Day

• Maximum working pressure (psi): 100
• Certifications and Listings: No Certifications or Listings
• Product Height (in.): 1.95
• Product Depth (in.): 24
• Non-toxic FDA grade compound: Yes
• Material: Vinyl