Drip Irrigation Tubing Irrigation Tubing For Sale In Bakersfield

• ✓ Manufactured with dow's 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
• ✓ Flow-regulated, self-flushing in-line emitters deliver equal flow over a wide pressure range and over the length of the drip line
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI

• Assembled Depth (in.): 23 in
• Pressure Rating: 10-50 PSI; recommended operating pressure: 25 PSI
• Irrigation System Component: Tubing

• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ Ideal for watering flowerbeds, closely planted areas, potted plants, and vegetable gardens

• Pressure Rating: 25 psi
• Assembled Height (in.): 9.000 in
• Returnable: 90-Day
• Manufacturer Warranty: None

• ✓ 100 ft. coil. O.D. 0.63 in., I.D. 0.54 in.
• ✓ Use to run water from faucet or valve to the planting area
• ✓ Flexible for easy installation

• Pressure Rating: 70 psi
• Color Family: Blacks
• Assembled Width (in.): 20.3 in

• ✓ Can be covered with mulch and used below or above the ground
• ✓ Maximum run length of 369 ft. can be achieved from a single water source at 45 PSI

• Pressure Rating: 50 psi
• Manufacturer Warranty: 3 Year Warranty
• Assembled Width (in.): 18 in
• Irrigation System Component: Tubing

• ✓ 1/2 gallon per hour (GPH) emitters every 6 in. are factory-installed for uniform water distribution
• ✓ Factory-installed emitters cut installation time

• Assembled Width (in.): 10.5 in
• Inner Diameter (in.): .170
• Tubing Length (ft.): 100
• Color Family: Blacks

• ✓ Extend drip emitters and microsprinklers from main line
• ✓ Flexible design allows for ease of use
• ✓ Compatible with all brands ¼ barbed fittings

• Assembled Width (in.): 6.5 in
• Tubing Length (ft.): 100
• Pressure Rating: 60 psi

• ✓ A single 1/4 in. soaker line should not exceed 15 ft.
• ✓ 50 Feet of tubing
• ✓ Watering provides full length, slow and steady flow
• ✓ Waters 0.25 GPH every 5 ft. at 25 psi

• Returnable: 90-Day
• Irrigation System Component: Tubing

• ✓ UV resistant
• ✓ Manufactured using 3-layer matrix technology to provide superior strength and flexibility
• ✓ 1-gallon per hour emitters installed every 18 in.

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): .62
• Assembled Width (in.): 24 in

• Returnable: 90-Day
• Manufacturer Warranty: None
• Made from a flexible PE blend material: Yes
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Tubing Length (ft.): 50
• Inner Diameter (in.): 0.25

• Flexible design allows for easy of use: Yes
• Color Family: Blacks
• Outer Diameter (in.): .25
• Irrigation System Component: Tubing
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Inner Diameter (in.): 0.25

• Manufacturer Warranty: None
• Assembled Depth (in.): 24 in
• Routes pipes in hard-to-reach areas: Yes
• Irrigation System Component: Pipe
• Outer Diameter (in.): 0.75
• Returnable: 90-Day

• ✓ Total of 500 1 GPH PC drip emitters per 500 ft. of dripline
• ✓ Maximum run length of 202 ft. can be achieved from a single water source at 45 psi
• ✓ Pressure compensating PC dripline's drip emitters deliver equal flow over the length of the dripline

• Irrigation System Component: Tubing
• Returnable: 90-Day
• Tubing Length (ft.): 500

• ✓ Made from flexible PE blend material
• ✓ Easy to attach Drip fittings

• Assembled Depth (in.): 3.000 in
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Manufacturer Warranty: None
• Irrigation System Component: Tubing

• ✓ Kink resistant and flexible for any layout
• ✓ Use to run water from valve or faucet to planting area
• ✓ 0.700 O.D.

• Assembled Height (in.): 5.0 in
• Pressure Rating: 70
• Color Family: Blacks

• ✓ Non-toxic FDA grade compound
• ✓ Suitable for use with liquids, chemicals and gases

• Maximum Working Temperature (F): 150
• Product Weight (lb.): .85lb
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.
• Actual inside diameter (in.): .625

• ✓ Clear with polyester reinforcement
• ✓ Higher pressure ratings

• Application: Sewer & Drain,Water Supply
• Minimum working temperature (F): 25
• Product Depth (in.): 4
• Pipe or Fitting Product Type: Pipe & Tubing

17 in

• Tubing Length (ft.): 50
• Assembled Width (in.): 17 in
• Returnable: 90-Day
• Assembled Depth (in.): 17 in
• Outer Diameter (in.): .7
• Manufacturer Warranty: 1 year

• ✓ Sized to 0.7 in. outside diameter
• ✓ Black in color
• ✓ Flexible tubing with UV-resistance

• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Height (in.): 9.5 in
• Assembled Width (in.): 24 in

• ✓ Layflat design
• ✓ Non-reinforced PVC compound

• Maximum working pressure (psi): 20
• Returnable: 90-Day
• Product Height (in.): 2.20
• Actual inside diameter (in.): 2

• ✓ For use with spot watering emitters and other drip irrigation devices
• ✓ 70 psi pressure rating

• Pressure Rating: 70 psi
• Assembled Depth (in.): 8 in
• Returnable: 90-Day
• Color Family: Blacks

• Maximum Working Temperature (F): 150
• Product Width (in.): 1.13
• Product Weight (lb.): 3.3lb
• Actual inside diameter (in.): .875
• Pipe or Fitting Product Type: Pipe & Tubing
• Product Length (ft.): 10

• ✓ Dimensions: 100 ft. with 0.620 ID x 0.710 OD
• ✓ DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
• ✓ Bending radius: 1.5 ft.
• ✓ Used as the primary supply line in a drip irrigation system into which micro tubing, drip emitters, drip line or micro sprinklers are connected

• Returnable: 90-Day
• Pressure Rating: 80

• ✓ Suitable for marine and low pressure discharge
• ✓ For use with hose barbs and clamps
• ✓ Low density polyethylene compound

• Maximum working pressure (psi): 5
• Actual outside diameter (in.): 1.375
• Features: Flexible,Lead Free

• Application: Sewer & Drain,Water Supply
• Minimum working temperature (F): 25
• Product Height (in.): .312
• Product Weight (lb.): .32lb
• Actual inside diameter (in.): .188
• Product Depth (in.): 120

• Returnable: 90-Day
• Pipe & Tubing Product Type: Specialty
• Certifications and Listings: No Certifications or Listings
• Material: Low-Density Polyethylene (LDPE)
• Translucent milky white color: Yes
• Manufacturer Warranty: Warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment.

• ✓ For use with hose barbs and clamps
• ✓ Non-toxic FDA grade compound
• ✓ Higher pressure ratings

• Pipe or Fitting Product Type: Pipe & Tubing
• Maximum Working Temperature (F): 150
• Returnable: 90-Day

• Irrigation System Component: Tubing
• Interchangeable with other manufacturers' brands of the same O.D. size micro tubing: Yes
• Tubing Length (ft.): 500
• Drip Line/Tubing Type: Drip or Emitter Line Tubing
• Assembled Width (in.): 11 in
• Inner Diameter (in.): 0.25