Drip Irrigation Tools Accessories Drip Irrigation For Sale In Richmond

Sturdy, long-lasting 5 in. Corrosion-resistant galvanized stake secures 1/4 in. The extended bend design prevents movement of tubing while accepting all brands and sizes of 1/4 in.

Remove dirt and particles from your irrigation system with the DIG 3/4 in. Protects drippers and micro sprinklers from clogging. Inner filter can be easily removed for cleaning.

Do not exceed 70 PSI inlet pressure. When you want to deliver water to your drip system via an above ground garden hose, these sturdy stakes are the ideal mount for a drip manifold.

Compression fitting provides a secure, water tight fit without the use of glue. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

DIG's 24VAC Drip Zone Valve Assembly Kit is a complete unit composed of a 3/4”, 24 VAC in-line valve with flow control and manual lever for on/off operation, 3/4” heavy duty filter with a 155-mesh screen (model D55), ¾”, 25 PSI preset pressure...

Drip tubing with .600 ID x .700 OD, 50 ft. This environmentally friendly kit can conserve water and use clean, renewable solar power without the need for a backup battery or AC power.

Useful on most surfaces found in garden. Tubing of all types. Easily attaches with use of hammer to secure drip 1/4 in. Tubing strap helpful addition to secure tubing in a neat and fashionable way.

Punch tool are included in the convenient, easy to carry bucket, which can also be used to store all of your drip parts in 1 place. The DB250 Drip Irrigation Maintenance and Repair Expansion Bucket is a fully loaded 162 piece kit that is used to repair,...

This saddle is ideal for both contractors and DIY. Simply clamp, push down, twist, and you are done. The easiest way to a secure fit without any tools. The Blazing Saddle Swing Pipe Barb is for use with 1-1/4 in.

The main feature of the tool is tubing cutter that can easily punches hole in the drip tubing and then use the side of the toll to insert drippers or barbs fittings into the drip tubing or micro tubing.

The DIG Universal Tee is designed to connect any size of 1/2 in. Provides a secure, water tight fit without the use of glues or special tools. Made from rugged, UV resistant plastic.

The DIG 1/4 in. Micro tubing, soaker hose or drip-line. Each connection offers raised barbed ends to ensure a strong, water tight fit. Barb Connector is used to provide a secure connection of two pieces of 1/4 in.

Easily connect 1/2 in. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

Riser or outdoor faucet. The Toro Blue Stripe Drip Water Source Installation Kit contains 5 essential components that are required for connecting drip tubing to a water supply. Connects a drip system to a valve, 1/2 in.

Flag drippers offer the posted flow rate with a line pressure of 25 psi. The DIG 2 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system. Twist open flag top can be removed for easy cleaning.

Ideal for watering flowers, potted plants and shrubs. It sprays up to a 6 ft. Flow control knob adjusts water for form 1-16 GPH at 25 psi.

Facilitates a fast, convenient installation. This Tubing Cutter helps you size tubing to meet the unique needs of your sprinkler and irrigation system. This non-threaded cutter prepares tubes for connection.

Orbit's Poly Pipe Cutter is ideal for cutting poly and plastic tubing up to 1-1/4 in. The sharp, stainless steel blade easily cuts through poly, rubber, and plastic pipe without leaving burrs.

Compatible with all brands of 1/2 in. Drip irrigation tubing. Hose bib or garden hose. Compression fittings provide quick, leak-tight connection. This adapter provides simple connection of a drip system to a 3/4 in.

Flag drippers offer the posted flow rate with a line pressure of 25 psi. The DIG 4 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system. Twist open flag top can be removed for easy cleaning.

The DIG Maverick 1/2 in. Easily convert a sprinkler riser to a 12-outlet drip system. Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to where it is needed most, at the plants root zone minimizing...

2.0 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. Tubing or inserted into the side wall of 1/2 in. Distribution tubing. They can be used in-line with 1/4 in.

The elbows facilitate a fast and convenient installation. Add supplemental watering to individual plants. Barbed Elbows (4-Pack) are used to cut, connect and secure tubing and emitters to individual plants.

The drippers can be installed by punching a hole into the 1/2 in. Micro tubing from the button drip emitter nipple to the plant area. DIG's Button Drippers feature labyrinth water flow paths that allow for a consistent flow rate from each dripper at an...

DIG's D48 makes it simple to connect a 1/2 in. Poly tubing to 1/2 in. Poly tubing is inserted easily into the compression side without the need for glue or special tools. (PVC side will require glue for connection).

When laying out your drip irrigation systems mainline, it is important to secure the tubing. Tubing Holder is an ideal accessory for holding poly tubing in its place on the ground.