Drip Irrigation Tools Accessories Drip Irrigation For Sale In Providence

Poly or vinyl micro tubing. Not recommended for securing ¼ in. Micro tubing stake is ideal in securing button or flag drip emitters at the end of 1/4 in. Drip line or soaker hose.

The stakes make directing your drip system a very easy experience. Loop Stake holds 1/4 in. The stake is made of durable galvanized metal. The Orbit 1/4 in. Distribution and soaker tubing in place.

Featuring a capacity of 20 GPM. FHT 25 psi Regulator is designed to connect to a standard hose bib. This regulator helps maintain optimum pressure and water flow to the drip line and emitters.

Raising the height to an effective 6 in. Easily installed by snapping directly into 1/2 in. Above the ground, these risers help increase the circumference of the wetting area. Sprinkler Risers are ideal for elevating jet sprayers, foggers or threaded...

Galvanized Stakes (10-Pack) help secure tubing and emitters to individual plants. The stakes help conform tubing to your landscape with mulch. Adds supplemental watering to individual plants.

When laying out your drip irrigation systems mainline, it is important to secure the tubing. The DIG 1/2 in. Galvanized Tubing Holder is an ideal accessory for holding poly tubing in its place on the ground.

This essential parts assortment includes the most commonly used 1/4 in. Fittings, heads, and accessories. Drip installation instructions are also included in this handy, refillable case.

Simply clamp, push down, twist, and you are done. Polyethylene irrigation piping. The easiest way to a secure fit without any tools. This saddle is ideal for both contractors and DIY.

Orbit's Poly Pipe Cutter is ideal for cutting poly and plastic tubing up to 1-1/4 in. The sharp, stainless steel blade easily cuts through poly, rubber, and plastic pipe without leaving burrs.

This spike assists in optimizing a sprayer's reach over foliage and maximizing the circumference of the wetting area. Spike is used to secure and raise micro sprinklers above the landscape.

Tubing Mounting Clips (10-Pack) help you install tubing and hosing. For use in a sprinkler and irrigation system. The clips are non-threaded.

Securely close off the end of 1/2 in. Poly tubing in your drip irrigation system. Allows for easy flushing of your system to keep your emitters clog free. Installed and removed easily without the need for glues or special tools.

Distribution tubing. The oversized finger tabs allow for easier installation. Tubing to your 1/2 in. Use to adapt 1/4 in. Barbed fittings feature a double barb design for increased grip and durability.

This female inlet - female pipe thread outlet regulator allows for adjusting the pressure of your system from 28 -60 PSI. Use the pressure regulator on any irrigation system that needs a lower pressure.

Set up your sprinkler and irrigation system with these Easy Fit Couplings (2-Pack). Designed to connect hoses. These non-threaded couplings deliver an easy fit for quick installation.

The Rain Bird Pop-Up Sprinkler to Drip Emitter Conversion Kit turns your sprinkler head into a 6-port drip emitter watering system. Ideal for larger planting beds and gardens. By applying water directly to the root zone of your plants, you eliminate wasteful...

The DIG D54 combines a 155 mesh screen filter with a 25 psi preset pressure regulator in one product for the protection of a drip irrigation systems and components. The product simplifies the installation and reduces the overall length of the head assembly...

It is built to handle a capacity of 1 GPH. Easy-Fit Biggie Tee as a 1/2 in. The tee features a black color. Use the 1/2 in. Fitting for drip and micro-irrigation systems.

The Universal Elbow connects all major brands of 1/2 in. Distribution tubing. To connect, slide tubing over the insert and hand twist the outer nut to cinch the tubing in place. To be used outdoors with cold water only.

This Filter Fertilizer Applicator combination provides a method for fertilizing your plants automatically. Assembled with a backflow preventer and a filter that removes impurities from the water supply and protects the small orifices of drippers and micro-sprinklers...

Easily connect 1/2 in. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Ideal for repairing or expanding your drip irrigation system. Made from durable, UV resistant materials for long life in the landscape.

The Drip Cutter and Punch Tool Kit are ideal for any drip irrigation installation. Both tools come with a comfortable grip and stay sharp, heat treated blade. The tools provide an efficient way to modify and customize your drip irrigation line.

Rain Bird drip irrigation is an ideal watering solution that will provide great results while saving you water. Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but it's the most convenient...

This Pro Series pressure regulator maintains water pressure to 25 psi. This reduces high pressure damage and drip system failure. Designed for above or below ground installation.

Distribution tubing. The oversized finger tabs allow for easier installation. Tubing to your 1/2 in. Use to adapt 1/4 in. Barbed fittings feature a double barb design for increased grip and durability.

Remove dirt and particles from your irrigation system with the DIG 3/4 in. Protects drippers and micro sprinklers from clogging. Inner filter can be easily removed for cleaning.

This low volume bubbler is ideal for watering shrubs and potted plants. Adjustable to vary spray distances from 1 to 6 ft. It is 6 inches long and rated at 1-29 GPH at 25 psi. For outdoor use and cold water only.