Drip Irrigation Tools Accessories Drip Irrigation For Sale In Mobile

• ✓ 3/4 in. MPT fitting
• ✓ Pressure rating of 30 psi
• ✓ Easy to clean filter via removable screw on cap
• ✓ 200 fine mesh filter traps grit and dirt

• Color Family: Blacks
• Product Width (in.): 5.5

• ✓ Made from high quality materials for optimum performance
• ✓ Exclusive combination design helps with any drip system set up and cuts down on the time it takes to complete the installation because everything is all in the same tool, no looking around for extra tools

• Outer Diameter (in.): .00
• Product Depth (in.): 1.13
• Irrigation System Component: Irrigation Tool
• Material: PVC

• ✓ Easy to use for punching holes in 1/2 in. poly tubing
• ✓ Red in color
• ✓ Saves time

• Color Family: Reds / Pinks
• Returnable: 90-Day
• Manufacturer Warranty: None

• ✓ No special tools or glues necessary
• ✓ Regulate the pressure of your drip irrigation or microsprinklers

• Product Height (in.): 6
• Returnable: 90-Day
• Maximum Inlet Pressure Allowed (psi): 100
• Product Depth (in.): 1.25

• Outlet Thread Type: FHT
• Outlet Diameter (in.): 0.5
• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks
• Requires no glue or special tools for installation: Yes
• Package Quantity: 1

• Irrigation System Component: Irrigation Tool
• Material: ABS Plastic
• Irrigation Tool Type: Hole Punch
• Ideal for use when installing large drip systems: Yes
• Inner Diameter (in.): 0.5
• Product Depth (in.): 1

.25

• ✓ Low watering rates help save water
• ✓ Holds spray devices above plants for good water coverage

• Product Width (in.): .25
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Maximum Tube Diameter (in.): .25
• Product Height (in.): .25

• Product Height (in.): 12.75
• Package Quantity: 1
• Maximizes the circumference of the wetting area: Yes
• Returnable: 90-Day
• Maximum Tube Diameter (in.): 0.25
• Product Depth (in.): 0.5

• ✓ Fastest self-tapping saddle
• ✓ Molded in an open position
• ✓ No clamping, coring, or cutting required

• Irrigation Tool Type: Pipe Saddle
• Product Height (in.): 3.625
• Returnable: 90-Day

• ✓ Built-in stop helps avoid puncturing both sides of tubing
• ✓ Sharp tool creates pilot holes in 1/2 in. drip irrigation tubing for barbed drippers and fittings

2

• Product Width (in.): 1
• Color Family: Blacks
• Product Height (in.): 2
• Product Depth (in.): 2

• For use in a sprinkler and irrigation system: Yes
• Color Family: Blacks
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Returnable: 90-Day
• Pressure Rating: 80 psi
• Product Length (in.): 18.30 in

• ✓ Allows you to convert a standard valve into a drip valve
• ✓ One-piece construction - combines a 200 mesh filter and a 30 psi pressure regulator
• ✓ Heavy duty construction - for years of reliable service

• Gallons per Hour: 4
• Product Width (in.): 8.5
• Inlet Diameter (in.): 0.5

• ✓ Shorter working height requires less digging
• ✓ Short thread design allows for the quickest and easiest installation possible

• Irrigation Tool Type: Pipe Saddle
• Returnable: 90-Day
• Material: Polypropylene
• Color Family: Multi

• Returnable: 90-Day
• Package Quantity: 10
• Product Width (in.): 5
• Color Family: Browns / Tans
• Outer Diameter (in.): .50
• Pressure rating of 30 PSI: Yes

• ✓ Faster and easier to install—requires up to 50% less force to install tubing, making your installation project faster and easier
• ✓ Quality construction
• ✓ Total satisfaction policy

• Product Width (in.): 3.4
• Inner Diameter (in.): .63
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Add the Rain Bird hose-end timer 1ZEHTMR (purchased separately) to automate your watering
• ✓ Drip irrigation fast start kit
• ✓ Total Satisfaction Policy
• ✓ Avoids over watering, saves on your water bill

• Kit Type: Drip Irrigation Kit
• Number of pieces included: 34

• ✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
• ✓ Body material: ABS

• Package Quantity: 25
• Color Family: Yellows / Golds
• Product Width (in.): 1.1875
• Pressure Rating: 10-80 PSI

• ✓ Friction loss is comparable to traditional insert fittings
• ✓ Contains no metal or chloride making it the most eco-friendly fitting on the market
• ✓ Slips easily into pipe without the need for tools, clamps, or extra fittings

• Connection: Female Pipe Thread
• Product Width (in.): 1.75
• Package Quantity: 25

• ✓ Universal fitting
• ✓ Works with 1/2 in. Orbit, 5/8 in. Raindrip, Toro Blue Stripe and 1/2 in. DIG

• Drip Irrigation Fitting Type: Elbow
• Inner Diameter (in.): 0.5
• Color Family: Blacks
• Fitting Type: Drip Adapters

• ✓ 3/4 in. FHT x 1/2 in. compression tee
• ✓ Easy, push-together connection to drip tubing

• Inner Diameter (in.): .58
• Outer Diameter (in.): .70
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Fitting Type: Compression Fittings,Universal Fittings

• ✓ Includes (3) 1 GPH and (3) 2 GPH drip emitters to allow you to vary flow to each plant
• ✓ Constructed of durable UV resistant materials for long life
• ✓ All-in-1 kit includes fine mesh filter, 30 PSI pressure regulator and manifold that connects to 1/4 in. tubing
• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet
• ✓ Comes with everything you need to convert a sprinkler head or ½ in. riser to 6 drippers for watering shrubs and landscaping
• ✓ Converts a sprinkler head to a drip watering zone with no digging

• ✓ Complete kit; covers up to 150 sq. ft. (can be easily expanded up to 600 sq. ft.)
• ✓ Can be used around building foundations to maintain moisture in heavy soils to prevent slab damage

• Included: Pressure Regulator,Tubing,Tubing Clips
• Returnable: 90-Day
• Manufacturer Warranty: 3 Year Warranty
• Package Quantity: 1

• ✓ Weed control
• ✓ Internal filter keeps out rocks and dirt
• ✓ Delivers fertilizer and aerates roots and soil

• Maximum Tube Diameter (in.): 1.38
• Material: ABS Plastic
• Irrigation System Component: Stakes

• ✓ Total satisfaction policy
• ✓ For drip applications
• ✓ Easy push-together installation
• ✓ For use in a sprinkler and irrigation system

• Product Height (in.): 8.800 in
• Product Width (in.): 12.400 in

• ✓ Accepts standard threaded drippers, bubblers and micro sprays
• ✓ Use with 1/4 in. drip tubing (purchased separately)

• Returnable: 90-Day
• Product Height (in.): 15
• Irrigation System Component: Riser
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Stainless-steel mesh filter
• ✓ Spray-free internal and external bleeds enable manual operation
• ✓ Install using Toro grease caps (sold separately)

• Color Family: Multi
• Irrigation System Component: Kit
• Number of pieces included: 4

• ✓ 70 psi pressure rating
• ✓ Screw one end onto faucet and push drip tubing into other end
• ✓ One 3/4 in. FHT connection and one 1/2 in. drip tubing connection

• Product Height (in.): 10.2
• Color Family: Blacks
• Pressure Rating: 70 psi