Drip Irrigation Tools Accessories Drip Irrigation For Sale In Laredo

The stakes also allow you to aerate and fertilize the roots and soil of your plants. Watering Stakes are designed to efficiently and effectively water your flowers, vegetable gardens, and small plants directly at the roots.

Ideal for use with baskets, pots and planting containers. Stabilizer Stakes to help keep your irrigation micro tubing in place. Use the DIG 6 in. These stakes lift emitters and foggers above the soil line to maximize the wetting diameter.

Pro Punch is designed for a fast and easy way to punch holes in 1/2 in. Used for installing drippers or 1/4 in. Helps resists hand fatigue and saves time when installing multiple drippers.

This product punches holes in the hoses so that emitters can be installed. Use the Toro Blue Stripe Drip Hose Punch in irrigation applications with Blue Stripe Drip 1/2 in.

These easy-to-install stakes help keep tubing right where you want it; making it perfect for your garden or landscape. Tie-Down Stakes (10-Pack) will help you get the results you desire.

Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the ergonomic handle allows for comfort.

Available with an FPT, 90° elbow, or straight barb fitting. The patented cutting tip allows the installer to pierce through pipe quickly, while the ergonomic handle allows for comfort.

Easily installed and recommended for drip irrigation systems. Assembled with a backflow preventer and a filter that removes impurities from the water supply and protects the small orifices of drippers and micro-sprinklers from clogging.

Polyethylene irrigation piping. The easiest way to a secure fit without any tools. The Blazing Saddle Swing Pipe Barb L is for use with 1 in. This saddle is ideal for both contractors and DIY.

The clips are non-threaded. Tubing Mounting Clips (10-Pack) help you install tubing and hosing. For use in a sprinkler and irrigation system.

Can be removed and reused for drip system modification or expansion. Figure 8 End Clamps (4-Pack) are designed to provide a strong grip but can be removed and reused for your convenience.

Hose, the Toro Blue Stripe Drip 1/2 in. Use to retrofit an existing irrigation system from a 1/2 in. Designed to join 2 lengths of Blue Stripe Drip 1/2 in. Riser Adapter Tees (2-Pack) offer a fit that resists leakage.

Only one saddle is required for a variety of pipe sizes and applications. Universal SnapTap pipe saddles have a unique adjustable latch that allows them to fit around 3/4 in., 1 in.

Ridges on the top of the add grip when using your foot to inserting the stake into the soil. The DIG 1/2 in. When laying out your drip irrigation systems mainline, it is important to secure the tubing.

Works with most different kinds of drip tubing. Use this stake to hold 1/2 in. Distribution or soaker tubing in place. Durable construction provides years of reliable use.

For outdoor use with cold water only. This reduces high pressure damage and drip system failure. The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on End Cap works with the most common sizes of 1/2 in.

(.700 OD) poly tubing without glue or tools, using a simple wrist action to push the polyethylene drip tubing into the compression fitting. Hold the compression fitting in one hand and the tubing in the other and force the poly tubing into the fitting...

4 barbed ports for multiple applications and this manifold comes with a easy access filter. Simply connect to an existing shrub head or a 1/2 in. This easy to use manifold connects Drip watering to any existing irrigation system.

Not recommended for securing ¼ in. Micro tubing stake is used to secure and stabilize the ¼ in. Poly or vinyl micro tubing. Micro tubing with emitter near the plant, inside pots or baskets.

Poly tubing to existing or new PVC sprinkler pipe. Then the poly tubing is connected to the compression side of the coupling by holding the PVC coupling in one hand and the drip tubing in the other, and forcing the drip tubing into the fitting compression...

Distribution tubing. They can be used in-line with 1/4 in. 0.5 gph (gallons per hour) emitters are ideal for supplemental watering of individual plants. Tubing or inserted into the side wall of 1/2 in.

Made from durable, UV resistant materials for long life in the landscape. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Easily connect 1/2 in.

UV stabilized materials help ensure a long product life. Easily attach to the drip tube and instantly give your yard some pop. Add some color and excitement to your drip irrigation system with Drip Pets.

Of distribution tubing that can be placed in any arrangement around your planting area. This easy-to-install Rain Bird drip irrigation kit has everything you need to set up a precise drip watering system that covers up to 6 plants or closely spaced plant...

Utilizing a double barb, the drip line is pushed over the barbed side of the fittings for a tight, leak-free connection. The 17 mm barbed tee is used in a three-way layout of DIG's and others 17 mm PC drip line and 1/2 in.

Color coded for easy identification. They are designed to maintain a flow rate of 1 GPH for inlet pressures of 10 - 60 psi. The RAINDRIP 1 GPH Pressure-Compensating Drippers promote fast and healthy plant growth with up to 70% less water.