Drip Irrigation Tools Accessories Drip Irrigation For Sale In Atlanta

2

• ✓ Reduces fatigue when setting up your system
• ✓ Sharp tool creates pilot holes in 1/2 in. drip irrigation tubing for barbed drippers and fittings

• Product Height (in.): 2
• Material: Polymer
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Product Depth (in.): 2

• Product Height (in.): 10
• Returnable: 90-Day
• Irrigation System Component: Irrigation Tool
• Unique handle is made for comfort and control while making cuts to your tubing: Yes
• Outer Diameter (in.): .00
• Irrigation Tool Type: Cutter & Puncher

• ✓ Enables sprayer to irrigate over the foliage of plants
• ✓ 8 in. spike with needle valve and 8 in. poly-riser

• Manufacturer Warranty: 3 Year Warranty
• Returnable: 90-Day
• Irrigation System Component: Riser
• Product Depth (in.): 1

• ✓ Improved cutting tip cleanly cuts pipe for a tight seal
• ✓ Short thread design makes for speedy installation
• ✓ For use with 80# and 100# poly pipe

• Material: ABS Plastic
• Product Width (in.): 2.5
• Inner Diameter (in.): 1

• ✓ Includes 8 in stake to hold spray in place
• ✓ Holds spray devices above plants so that the spray achieves good water coverage
• ✓ Includes a 1/4 in barb to connect 1/4 in tubing from your water supply
• ✓ Low watering rates help save water

• Color Family: Blacks
• Product Depth (in.): 0.25

• ✓ Durable handles offer support and strength
• ✓ Easy to use for punching holes in 1/2 in. poly tubing
• ✓ Red in color

• Color Family: Reds / Pinks
• Returnable: 90-Day
• Irrigation System Component: Irrigation Tool

• ✓ Model number and size molded into saddle
• ✓ Molded in an open position

• Irrigation Tool Type: Pipe Saddle
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Product Depth (in.): 1.75
• Product Height (in.): 5.125

• ✓ Requires up to 50% less force to install tubing
• ✓ Works with virtually any manufacturer's 1/2 in. tubing, where the outside diameter ranges from 0.630 in. to 0.700 in.
• ✓ Quick tips; dip ends of tubing in warm water for a minute to soften up before inserting into fitting, and twist fitting onto tubing while inserting if necessary

• Inner Diameter (in.): .63
• Outer Diameter (in.): .70
• Drip Irrigation Fitting Type: Tee

• Can be used with DIG's 1/2 in. brown drip-line model B18100: Yes
• Returnable: 90-Day
• Drip Irrigation Fitting Type: Elbow
• Product Height (in.): 6.5
• Connection: Barb x Barb
• Pressure Rating: 30

• ✓ Resistance causes a compression seal that the water cannot penetrate
• ✓ Pack of 25
• ✓ No special tools or glues needed
• ✓ Black fittings are .600 ID (inside diameter) x .700 OD (outside diameter)

• Returnable: 90-Day
• Connection: Comp

• ✓ Stake is easy to relocate
• ✓ 1/2 in. drip tubing inlet x 1/2 in. male pipe thread and 1/2 in. drip tubing outlet
• ✓ For drip irrigation applications only

• Material: Poly
• Product Width (in.): 3.250 in
• Returnable: 90-Day

• Product Depth (in.): 1
• Gallons per Hour: Adjustable
• Maximum Gallons Per Minute: 0.235
• Pressure Rating: 25 psi
• Product Width (in.): 6 in
• Color Family: Blacks

• Maximum Gallons Per Minute: 2
• Ideal for trees, shrubs, vegetable and flower gardens: Yes
• Package Quantity: 1
• Product Length (in.): 0.017 in
• Tubing Size: 1/2"
• Manufacturer Warranty: 1 year

• Irrigation System Component: Accessory
• Outlet Diameter (in.): .75
• Minimum Regulated Pressure (psi): 25
• Total Satisfaction Policy: Yes
• Product Depth (in.): 1.3
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• ✓ Helps maintain drip and micro-irrigation systems
• ✓ 1" male pipe thread on both ends
• ✓ 1 in. MPT fitting size
• ✓ Connect to valve and supply line

• Product Width (in.): 5.5
• Irrigation System Component: Accessory

• ✓ Durable ABS plastic construction, specially engineered UV-protected cap designed for hammering into the ground with sledge hammer
• ✓ Good for new, established, and struggling trees

• Manufacturer Warranty: Manufacturer Warranty is valid for 1-year. Stake will be replaced at no charge with proof of purchase in case of a manufacturer defect or breakage/splintering during installation.
• Color Family: Browns / Tans
• Product Height (in.): 14
• Maximum Tube Diameter (in.): 1.38

• ✓ Quick and easy to install
• ✓ Compression fittings offer a water tight, secure fit without the need for special tools or glue
• ✓ Will not suppress water flow

• Returnable: 90-Day
• Material: ABS Plastic
• Pressure Rating: 60

• ✓ Made from high-quality materials for long life in the landscape
• ✓ Maximum operating pressure: up to 60 psi

1.25 in

• Product Height (in.): 2.75
• Product Length (in.): 1.25 in
• Product Width (in.): 1.25 in
• Returnable: 90-Day

• ✓ Drip irrigation maintenance and repair expansion bucket features DIG's versatile, color-coded, pressure-compensating drippers in 3 flow rates (1, 2, and 4 GPH) to efficiently repair, add to, or modify your exiting drip system; the kit is economically priced well below the cost of the individual parts combined
• ✓ Replace or repair drippers, micro tubing, and small sized connections; fully loaded with 162 pieces to repair, expand, or maintain drip irrigation systems
• ✓ Maximum recommended flow using the 1/4 in. distribution, tubing: 12 GPH premium micro tubing (poly), length: 250 ft. with 0.170 I.D. x 0.250 O.D. PC drip emitter flow rates and color code: 1 GPH (4 LPH) color code - black 2 GPH (8 LPH) color code - green

• Manufacturer Warranty: 3 Year warranty
• Irrigation System Component: Kit
• Color Family: Blacks

• Product Width (in.): 1 in
• Inner Diameter (in.): 0.75
• Blue fittings work with a .710 OD (outside diameter) poly tubing: Yes
• Connection: Comp x Comp
• Pressure Rating: 60
• Product Height (in.): 3.25

• ✓ Constructed of highly durable UV and chemical-resistant materials to assure long life
• ✓ 1/4 in. connection size

• Returnable: 90-Day
• Fitting Type: Barb Fittings
• Product Width (in.): .25
• Material: Plastic

• ✓ 0-13 GPH adjustable flow
• ✓ Full circle coverage, 0 ft. - 3 ft. watering distance
• ✓ Sharp, self-piercing barb inserts directly into all 1/2" or larger Drip irrigation tubing

• Maximum Gallons Per Minute: .2
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Color Family: Blacks

• Product Length (in.): 1.75
• Works with the most common sizes of 1/2 in. drip tubing (0.670- 0.710 O.D.): Yes
• Returnable: 90-Day
• Manufacturer Warranty: 1 Year Limited
• Material: Plastic
• Product Width (in.): 2.0

• ✓ Pre-assembled system saves time, no cutting or hole punching required
• ✓ System can be connected to additional drip kits to cover larger areas
• ✓ Compatible with any timer, faucet, and garden hose
• ✓ Slow and even water flow (0.35 Gallons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants

• Irrigation System Component: Kit
• Manufacturer Warranty: 2 Years

• ✓ Flag style dripper
• ✓ Dual barbed ends for use with 1/4 in. and 1/2 in. drip tubing

• Product Depth (in.): 0.8 in
• Irrigation System Component: Drip Irrigation Emitter
• Spray Pattern: Drip
• Tubing Size: Fits All Tubing Sizes

• ✓ No special tools or glue are needed
• ✓ 11, 13 stakes assembly with micro tubing and barbs for use with micro sprayers
• ✓ 20, 1 GPH pressure-compensating button drip emitters
• ✓ Save money by significantly lowering the cost of system components compared to conventional irrigation systems

• Color Family: Blacks
• Number of pieces included: 124

• ✓ Leak-free connection
• ✓ Made of high impact, high strength, and durable UV resistant quality plastic for long-life operation even in harsh conditions
• ✓ 1-piece construction
• ✓ Fits DIG's and others brown 17 mm PC drip line and 1/2 in. drip tubing
• ✓ Operating pressure: up to 35 psi

• Material: ABS Plastic