Drip Irrigation Systems And Kits Irrigation Supplies Equipment For Sale In Norwalk

• Produced from 100% recycled rubber: Product Features
• Ship wt: 8 lb
• Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers: Specs

• ✓ Operates at any pressure between 10 and 80 psi
• ✓ Features a removable nozzle for easy replacement and maintenance

• Package Quantity: 1
• Included: Stakes,Tubing
• Manufacturer Warranty: 3 Year Warranty
• Number of pieces included: 47

• ✓ Includes 20 drippers at 1 GPH, 2 drippers at 2 GPH and 2 drippers at 4 GPH
• ✓ Included drippers are pressure compensating (PC) providing consistent, uniform flow
• ✓ Perfect for watering shrubs, trees, flowers and bushes
• ✓ Includes backflow preventer so water does not re-enter the main water supply through siphoning

• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips
• Returnable: 90-Day

• ✓ Saves up to 70% in water use
• ✓ Saves time: no hand watering
• ✓ For cold water use only

• Package Quantity: 1
• Number of pieces included: 58
• Kit Type: Drip Irrigation Kit

• ✓ Saves time versus hand-watering
• ✓ Kit includes everything you need to start precision watering
• ✓ Quick connect technology to easily attach (and detach) from any outdoor spigot
• ✓ Recommended for flower and vegetable gardens, raised beds and shrubs

• Number of pieces included: 19
• Manufacturer Warranty: Satisfaction Guaranteed or your money back. If you are not satisfied, return the product and all pieces to Scotts Miracle-Gro Products, Inc. P.O. Box 606, Marysville, OH 43040 Limit: One product per family

56

• ✓ Pre-assembled system saves time, no cutting or hole punching required
• ✓ Micro sprinklers provide 800 sq. ft. of coverage and dripline will cover 82 lin. ft.
• ✓ Bleed function allows you to flush any debris from system

• Package Quantity: 56
• Number of pieces included: 56
• Included: Backflow Preventer,Filter,Garden Hose Connection,Pressure Regulator,Sprinklers,Stakes

• Rate: 35GPH
• Connection: 1in Male NPT

• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs
• Acts as an end cap for low-pressure irrigation tubing applications: Product Features

• ✓ Patented Emitter Installation and Removal Tool makes it easy to work with spot watering emitters as well as 1/4 in. barbed fittings
• ✓ Organizer tray filled with 112 universal drip irrigation devices
• ✓ Includes 40 pressure compensating, self-piercing emitters
• ✓ Replace non-working devices with Rain Bird's clog resistant, pressure compensating emitters

• Irrigation System Component: Kit
• Included: Filter,Garden Hose Connection,Sprinklers,Stakes

• ✓ Drip emitter inlet size: 1/4 in. barb; drip emitter outlet side: nipple
• ✓ Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
• ✓ Drip emitter flow rates: 0.5 GPH at 5 psi, 0.8 GPH at 10 psi and 1 GPH at 15 psi (nominal)
• ✓ Complete kit including all the parts for a complete system

• Package Quantity: 1
• Manufacturer Warranty: 3 Years

• ✓ Includes 50 ft. of 1/4 in. drip-line with .65 GPH flow rate from each dripper spaced at 9 in. intervals
• ✓ Made from high quality, UV resistant materials
• ✓ Includes 25 PSI pre-set pressure regulator
• ✓ 2 outlets per each drip emitter helps to prevents clogging
• ✓ Water your vegetable garden to promote growth

• Included: Backflow Preventer,Pressure Regulator,Stakes,Tubing,Tubing Clips

• ✓ 3 simple steps to install this kit: step 1 - connect to water source, step 2 - lay out the supply tubing, step 3 - attach the pre assembled water lines
• ✓ Our patented clamp-N-pierce connector on all of the assembled feeder lines means there are no tools required - a simple push and it connects, pierces the tubing and is "drip ready"
• ✓ Kit includes: 50 ft. of 1/2 in. pre-assembled hose, a filter/regulator combo, timer, "Y" valve, 5 wire stakes, 10 hole plugs, an end plug, a universal "T", 10 pre-assembled 2 GPH feeder lines, 10 plastic stakes
• ✓ Kit has everything you need to get started with drip irrigation and stop watering your plants by hand

• Color Family: Blacks
• Manufacturer Warranty: 2 YEAR LIMITED

Product Features

Specs

• Even water distribution up to 5,280 feet on level terrain and straight runs.: Product Features
• Inner diameter: approximately 9/16-inch: Specs
• Length: 100 ft
• Adjust length per installation and water flow availability.: Product Features
• Install above or below ground.: Product Features
• Made in the USA: Specs

Specs

• Arrow sets proper height of stake in pot.: Specs
• Includes 36" supply tube and spray stake.: Specs
• Directs spray toward plant, reducing undesired overspray.: Specs

• ✓ Easy to install and use
• ✓ A discreet way to water your plants automatically
• ✓ Kit also includes 20, ¼ in. micro tubing stake, 10 ¼ in. tee, 12¼ in. barbs,10 ½ in. stake to hold the tubing to the ground,4, ½ in. tee, one, ½ in. coupling, 4 ½ in. elbow, hole punch, one set of 10 goof plug, and 8 hose end to close the end of the ½ in.

• Returnable: 90-Day
• Irrigation System Component: Kit
• Included: Backflow Preventer,Pressure Regulator,Tubing,Tubing Clips

• Clearance: 2- inch clearance

• ✓ Fits most standard valve boxes
• ✓ Use to water a small bed or container plants
• ✓ Includes 10 tie-down stakes, 5 straight fittings, 10 tee fittings, 5 elbow fittings, 1 faucet connector, five 1 GPH flag emitters, five 2 GPH flag emitters and five 4 GPH flag emitters
• ✓ Compatible with Toro blue stripe 1/4 in. tubing (sold separately)

• Number of pieces included: 46
• Included: Stakes

Specs

• Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
• 1/2" barb fittings: Specs

Product Features

• Approx 9 and 3/8" long: Specs
• Description: Punch Blade 2 mm
• Size: 2mm
• Can be adjusted to fit 32, 25, 20 and 16 mm poly tubing with the turn of a knob: Product Features
• Precise punch-widths mean no guessing if your particular emitters are going to fit when you punch a hole into you: Product Benefits
• An extremely functional tool for spray stake and drip emitter installation: Product Features

• ✓ Operates at any pressure between 10 and 80 psi
• ✓ Connects to 1/2 in. sprinkler risers
• ✓ Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
• ✓ Built-in mini disk filter provides additional system protection and easy cleaning

• Number of pieces included: 46
• Package Quantity: 1

• ✓ Works with the most common sizes of 1/2 in. drip tubing (0.670- 0.710 O.D.)
• ✓ Unique release feature simplifies installation and maintenance
• ✓ For irrigation applications only
• ✓ Made of durable, UV-resistant materials for years of dependable use
• ✓ Convenient installation and maintenance

• Material: Polyethylene

Specs

• Priced per bundle of 25: Specs
• Feeder tube is 1/4 inch in diameter: Specs
• Can be dialed to flow from a 1/2 GPH drip, up to a 10 GPH drip: Specs