Drip Irrigation Systems And Kits Irrigation Supplies Equipment For Sale In Naperville

• Description: Micro Tubing 4mm x 100 ft coil
• Length: 100ft

• ✓ 1 hole punch
• ✓ Self-flushing NGE emitters are pressure compensating for uniform flow, even on sloping landscapes
• ✓ Use to connect Blue Stripe Drip 1/2 in. tubing to an outdoor faucet

• Returnable: 90-Day
• Manufacturer Warranty: 1 YR
• Irrigation System Component: Kit

Specs

• 12" green landscape stake with 27" green flexible vinyl supply tube: Specs
• Complete with a top that can do 320 degree full fan, 165 degree half and 180 degree half circle patterns: Specs

• ✓ All drip irrigation connections are drip irrigation standard and additional parts are available at local hardware stores or home centers
• ✓ Easy to install the drip manifold
• ✓ Pressure regulated, self-flushing drip emitters with a built-in check valve deliver equal flow at a wide range of operating pressures and will stop dripping when water is shutoff

• Irrigation System Component: Kit
• Number of pieces included: 47
• Manufacturer Warranty: 3 Years

• ✓ Add a capful of liquid fertlizer at each fill - stand back and watch the results
• ✓ Waters 4 plants for 2 weeks between refills
• ✓ Going on vacation? No problem

• Returnable: 60-Day

• 3/4" x 7" overall: Specs

• ✓ Kit has all the parts needed to cover up to 10 vegetables rows totaling 50ft long
• ✓ Includes 25 PSI pre-set pressure regulator
• ✓ Includes 1/4 in. drip-line and tubing with built-in drippers
• ✓ Easily installed, simple do-it-yourself project

• Package Quantity: 1
• Kit Type: Planters

Specs

• To connect 1/4" tubing to 1/4" tubing: Specs
• Male barb x barb fittings: Specs

Specs

• Can be dialed to flow from a 1/2 GPH drip, up to a 10 GPH drip: Specs
• Feeder tube is 1/4 inch in diameter: Specs
• Adjustable dripper stake: Specs

• ✓ Customizable water saving solution for use with any 1/2 in. or 5/8 in. garden hose
• ✓ Slow and even water flow (0.35 Gal. per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants
• ✓ 6 micro-sprinklers with interchangeable nozzles, quick-up connectors, sprinkler stands, and component hardware

• Number of pieces included: 44
• Irrigation System Component: Kit
• Included: Backflow Preventer,Filter,Pressure Regulator,Sprinklers,Stakes

• ✓ Provides faster plant growth, longer lasting blooms and greener leaves
• ✓ Water goes to the root zone which helps prevent water evaporation
• ✓ Save water and money
• ✓ Each kit contains: (1) pressure regulator with 1/4 in. tubing adaptor, (10) 1/4 in. stakes with bug caps, (2) 1/4 in. barbed couplings, (10) tubing mounting clips, (4) spot watering emitters 2 GPH, (4) spot watering emitters 1 GPH, (8) 1/4 in. barbed tees and 25 ft. of 1/4 in. tubing

• Returnable: 90-Day
• Number of pieces included: 40

• ✓ Drip emitter inlet size: 1/4 in. barb; drip emitter outlet side: nipple
• ✓ Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
• ✓ Micro tubing length size: 50 ft. x 1/4 in.
• ✓ Total flow rate for this kit: 32 GPH (.53 GPM)
• ✓ Raised barbed outlet prevents water runoff along the drip lateral

• Irrigation System Component: Kit

• ✓ Built-in backflow prevention
• ✓ Stainless-steel mesh filter

• Returnable: 90-Day
• Irrigation System Component: Kit
• Manufacturer Warranty: 1 YR
• Number of pieces included: 4

• ✓ Drip uses up to 80% less water over sprinkler watering
• ✓ All-in-one unit includes filter, 30 psi regulator and swivel tee
• ✓ Constructed of durable UV resistant materials for long life
• ✓ Converts a Rain Bird 1800 series sprinkler with no digging
• ✓ Connects to all brands of 1/2 in. drip tubing

• Irrigation System Component: Kit

• ✓ Slow and even water flow (0.35 Gallons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants
• ✓ Bleed function allows you to flush any debris from system
• ✓ System can be connected to additional drip kits to cover larger areas
• ✓ Pressure regulator helps provide even and consistent water flow throughout the entire system

• Number of pieces included: 56
• Returnable: 90-Day

• NOTE: Does not fit our 5/8" soaker hose. Use item number BBFT50: Product Features
• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" soaker or 5/8" poly tubing for low-pressure operation: Specs

• ✓ No special tools or glue are needed
• ✓ Operating pressure: 25 to 30 psi (25 psi pressure regulator included), maximum recommended flow rate: 220 GPH (3.7 GPM) drip poly tubing size: 200 ft. with .600 I.D. x .700 O.D., drip micro tubing (vinyl) size: 50 ft. with .156 I.D. x .245 O.D.
• ✓ Featured a hose end solar powered timer with large, easy-to-read LCD screen and simple, icon-based programming with weekly or cyclical programs, 4 start times per day, durations of up to 6 hours, program delay of up to 99 days, system off, manual operation, and a sensor wire connection to accept a rain sensor, the timer's manual irrigation cycle can be performed via the manual program button use to water roses, shrubs, groundcovers, flowerbeds and trees, ideal for hillsides
• ✓ Maximum incoming operating pressure: 100 psi, hose end solar powered timer connection : 3/4 in. FHT x MHT, hose end timer flow range: .1 to 8 GPM, hose end timer power source: ambient light (solar)
• ✓ Complete kit; covers up to 700 sq. ft. (can be easily expanded) contains 5 micro sprayer assemblies, 13 in. spike and micro tubing with barb, including three 360 Degree, four 180 Degree and four 90 Degree patterns, and 50 1-GPH PC button drip emitters, applies water at a very low application rate leading to less surface evaporation from leaves and soil, micro sprayers are useful as water remains in the upper soil layers where the roots are developing, offers flexibility in irrigation frequency and application rate leading to minimized surface compacting and runoff

• Package Quantity: 1

• Inner Diameter (in.): .50
• Material: ABS Plastic
• Blue fittings work with a 0.710 O.D. (outside diameter) poly tubing: Yes
• Drip Irrigation Fitting Type: Elbow
• Color Family: Blacks
• Connection: Comp

• ✓ Body material: ABS
• ✓ O-ring material: EPDM

• Connection: Male Hose Thread
• Material: Acrylonitrile Butadiene Styrene (ABS)
• Drip Irrigation Fitting Type: Coupling
• Fitting Type: Push to Connect Fittings

• ✓ Black
• ✓ Quickly connects .700 in. outside Dia Drip irrigation tubing to 3/4 in. faucet or garden hose
• ✓ Stainless steel 150 mesh filter to catch debris and prevent clogging

• Returnable: 90-Day
• Outer Diameter (in.): .5
• Product Height (in.): 1.0 in

• Package Quantity: 25
• Manufacturer Warranty: 3 Year Warranty
• Spray Pattern: Adjustable
• Irrigation System Component: Drip Irrigation Emitter
• Tubing Size: Fits All Tubing Sizes
• Pressure Rating: 25 psi

• ✓ Self-piercing barbed end for insertion directly into the side of 1/2" or larger Drip tubing
• ✓ For use in your sprinkler and irrigation system
• ✓ Fast, easy and convenient installation
• ✓ 1/4 in. connection size
• ✓ Unique barb design reduces insertion force

• Product Height (in.): 2

• ✓ Helps facilitate a fast and convenient installation
• ✓ Connector for use with 1/2 in. and 5/8 in. drip irrigation tubing
• ✓ Helps add supplemental watering options to individual plants

• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
• Pressure Rating: 0 to 50 psi
• Connection: Comp