Agiseek home

Drip Irrigation Systems And Kits Irrigation Supplies Equipment For Sale In Indianapolis

Become a Partner
Solar RainMaker Parts Kit
Prices start at : 14.05 USD / each

And length is 40 ft. Tubing size is 1/4 in. Works exclusively with the FlowerHouse Solar RainMaker. FlowerHouse Solar RainMaker replacement kit/extension kit is designed to supply all the tubing, water emitters/drippers, fittings and ground stakes to...
  •  12 "T" fittings
  •  12 ground stakes
  •  12 water emitters/drippers
  • Number of pieces included: 12
  • Returnable: 90-Day
  • Color Family: Blacks
Indiana
Indianapolis
Barb Fitting Elbow For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
Prices start at : 2.29 USD / each

Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb elbow for irrigation tubing and soaker hose.
  • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
  • Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No locking ring clamp clamp or gear clamp needed: Product Benefits
Indiana
Indianapolis
Hose Compression Fitting Female Hose Thread For Use With 5/8\
Prices start at : 4.09 USD / each

Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot! Compression x Female Garden Hose Thread for 5/8" poly tubing. Use item number CR58F. NOTE: Does not fit our 5/8" soaker hose.
  • Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
  • NOTE: Does not fit our 5/8" soaker hose. Use item number CR58F: Product Features
Indiana
Indianapolis
Toro Micro Distribution Irrigation Coupler Fitting 4mm BARB X BARB 100/BAG
Prices start at : 2.59 USD / each

Use to move water to a drip emitter to direct water to plants! Toro's micro distribution tubing is constructed of LDPE, and designed to distribute water to precise locations. It can be used with barb fittings such as this coupler to move water to a drip...

Specs

    • Male barb x barb fittings: Specs
    • 100 per bag: Specs
    Indiana
    Indianapolis
    Drip Irrigation Maintenance and Repair Expansion Bucket
    Prices start at : 43.85 USD / each

    Fittings, PC drippers, stakes, and 250 ft. Save money and time with DIG's new drip system maintenance and repair bucket which contains all the essential 1/4 in. The DB250 Drip Irrigation Maintenance and Repair Expansion Bucket is a fully loaded 162 piece...
    •  Contains all the essential components to repair or extend a drip irrigation installation 40 pressure-compensating drippers in 1, 2, and 4 GPH
    •  No special tools or glue are needed; save money by significantly lowering the cost of system components
    • Returnable: 90-Day
    • Color Family: Blacks
    • Kit Type: Drip Irrigation Kit
    • Package Quantity: 1
    Indiana
    Indianapolis
    5/8\
    Prices start at : 3.54 USD / 1 Unit

    Http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/5-8%22-perma-loc-tee-fitting-irri-gator-accessory-9006.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item or refund the...
    Indiana
    Indianapolis
    92-Piece Drip Parts Assortment
    Prices start at : 11.88 USD / each

    All of the products included are universal and work with most major brands. Drip installation instructions are also included in this handy, refillable case. Fittings, heads, and accessories.
    •  Handy, refillable case keeps fittings organized
    •  Includes 1/4 in. Fittings
    •  For drip irrigation applications only
    •  For cold water use only
    • Included: Sprinklers,Tubing Clips
    • Manufacturer Warranty: None
    Indiana
    Indianapolis
    25 Drippers Planters Kit
    Prices start at : 12.99 USD / box

    Save on costs and increase plant growth with the Elgo 25 Drippers Planter Kit. Water supply tube. The Elgo 25 Drippers Planter Kit is a water conserving drip system designed for potted plants on a patio, balcony or in a greenhouse.

    46

      •  Bleed function allows you to flush any debris from system
      •  Backflow preventer keeps water from re-entering the main water supply and potential contamination
      • Package Quantity: 46
      • Number of pieces included: 46
      • Kit Type: Drip Irrigation Kit
      • Included: Backflow Preventer,Filter,Garden Hose Connection,Pressure Regulator,Tubing
      Indiana
      Indianapolis
      Green Vegetable Watering Kit
      Prices start at : 19.97 USD / each

      The vegetable watering kit will deliver almost unbelievable results with tomatoes and many other bedding vegetables. All you have to do is refill the reservoir once every two weeks with a garden hose it supplies a constant drip to four plants while you...
      •  Waters 4 plants for 2 weeks between refills
      •  Going on vacation? No problem
      • Irrigation System Component: Kit
      • Returnable: 60-Day
      Indiana
      Indianapolis
      Irri-Gator Kit – 250\'
      Prices start at : 94.00 USD / 1 Unit

      Specific charges will be displayed during checkout.If anything you purchase from us proves unsatisfactory, we will either replace the item or refund the purchase price. Eliminates overhead spray, thereby reducing evaporation, conserving water, and discouraging...
      Indiana
      Indianapolis
      Rainbird Pop Up Head Nozzle
      Prices start at : 2.29 USD / each

      For use on the pop-up spray heads and as a replacement nozzle for the shrubbery heads we currently carry. Compatible with other Rain Bird matched flow rate nozzles. Nozzles have adjustable flow and radius with stainless steel adjustment screw and filter...
      • Pattern: Adj. circle
      Indiana
      Indianapolis
      Drip Tubing – 100\' - Irri-Gator Accessory
      Prices start at : 17.78 USD / 1 Unit

      For use with Irri-Gator Kits.http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/drip-tubing-100-irri-gator-accessory-9657.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item...
      Indiana
      Indianapolis
      Regulator/Screen Filter - Irri-Gator Accessory
      Prices start at : 15.32 USD / 1 Unit

      Http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/regulator-screen-filter-irri-gator-accessory-9017.0.htmlIf anything you purchase from us proves unsatisfactory, we will either replace the item or refund the purchase...
      Indiana
      Indianapolis
      Toro Irrigation 5/8in Tubing Blue Stripe, No Emitters
      Prices start at : 22.99 USD / each

      Standard barb/clamp fittings can also be used. Manufactured from premium grade linear low-density polyethylene resins, for tough dependable operation in the most demanding agriculture and landscaping micro-irrigation applications! The 5/8 inch tubing...
      • Description: 100-foot coil of 5/8-inch tubing
      • Length: 100ft.
      Indiana
      Indianapolis
      5/8\
      Prices start at : 4.15 USD / 1 Unit

      Standard Perma-Loc fitting on one side; barb type fitting on the other. For use only with the 2,000' kit.http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/5-8%22-perma-loc-x-barb-valve-irri-gator-accessory-7039.0.htmlIf...
      Indiana
      Indianapolis
      Dramm Irrigation No Drip Riser Control
      Prices start at : 1.69 USD / each

      No drip riser for control of drip from overhead lines! No Drip Riser elevates the Nozzles 2 1/4" above the PVC pipeline. This will eliminate control drip from the nozzles overhead.
      Indiana
      Indianapolis
      Rainbird Pop Up Sprinkler Body
      Prices start at : 3.19 USD / each

      Choose pop-ups for watering shrubs, small lawns and odd-shaped planting areas. Reliable, low-pressure operation! 1/2" bottom female connection. Sold without spray heads and nozzles, choose from a variety of shrubbery spray heads and MPR (matched precipitation...
      • Clearance: 2- inch clearance
      Indiana
      Indianapolis
      Maxijet Irrigation Landscape Stake Assembly, with 3-in-1 swap-top head
      Prices start at : 2.19 USD / each

      Replaces the MLA. Flow Control #MJ12 is available, purchased separately. Does not include a shut-off, but it can be shut off by crimping supply tube and placing it in the Stop Ring.

      Specs

        • 12" green landscape stake with 27" green flexible vinyl supply tube: Specs
        • Spray diameter varies from 3 foot to 4 foot depending on PSI and nozzle position: Specs
        Indiana
        Indianapolis
        1/4 in. Barb Elbows (10-Pack)
        Prices start at : 1.96 USD / each

        Micro tubing, soaker hose or drip-line around sharp corners. The DIG 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Use for continuing lengths of micro tubing or to extend a micro tubing from the poly tubing.
        • Returnable: 90-Day
        • No special tools or glue needed: Yes
        • Drip Irrigation Fitting Type: Elbow
        • Material: ABS Plastic
        • Fitting Type: Barb Fittings
        • Connection: Sweat x Sweat
        Indiana
        Indianapolis
        1 GPH Flag Dripper (25-Pack)
        Prices start at : 5.28 USD / each

        The DIG 1 GPH Flag Drippers provide a reliable, point source irrigation solution for your drip system. Flag drippers offer the posted flow rate with a line pressure of 25 psi. Twist open flag top can be removed for easy cleaning.
        • Pressure Rating: 25 psi
        • Made from high quality, UV resistant materials: Yes
        • Product Depth (in.): 0.75
        • Spray Pattern Degrees: 360 Degrees
        • Returnable: 90-Day
        • Gallons per Hour: 1
        Indiana
        Indianapolis
        Drip Irrigation Hole Punch Blade, Choose Size
        Prices start at : 11.79 USD / each

        An extremely functional tool for spray stake and drip emitter installation! Easy to use. Choose size of blade below. Adjustable for use with 16mm to 32mm (5/8" to 1 1/4") tubing.

        Product Benefits

          Specs

            • Description: Punch Blade 2 mm
            • An extremely functional tool for spray stake and drip emitter installation: Product Features
            • Allows a precise hole to be punched in poly tubing such as Toro Blue Stripe without slipping or driving through to the other side: Product Benefits
            • Precise punch-widths mean no guessing if your particular emitters are going to fit when you punch a hole into you: Product Benefits
            • Approx 9 and 3/8" long: Specs
            • Weighs one pound: Specs
            Indiana
            Indianapolis
            Maxijet Irrigation Nursery Stake 1-15gal Container Assembly, 160 degree fan spray
            Prices start at : 21.99 USD / each

            Shut off side arm with ring and steps to hold it in dirt. 5 1/4" stake has steep angle threads to easily lock in tubing. Works well from low pressures of 2-3 psi (3.7 to 4.5 gph) up to 20-35 psi (10.5 gph to 13 gph).

            Specs

              • Directs spray toward plant, reducing undesired overspray.: Specs
              • Arrow acts as an edge of pot locator.: Specs
              • Arrow sets proper height of stake in pot.: Specs
              Indiana
              Indianapolis
              Maxijet Irrigation Ag Stake Assembly, 12ft diameter spray max
              Prices start at : 1.79 USD / each

              Durable one-piece jet with a winged one-arm design and quick locking threads to get the jet in and out of the stake in 1-2 turns. 12 ft diameter spray pattern at 20-30 psi, 12 gph.
              Indiana
              Indianapolis
              180-Degree Half Circle Micro Bubbler for Riser Stakes (2-Pack)
              Prices start at : 1.47 USD / each

              Ideal for shrub plantings, trees, containers and flower beds. Rain Bird Micro Bubblers provide adjustable, low-volume watering up to a 3 ft.
              •  Half circle pattern
              •  Offers finger-top flow control with a shut-off option
              • Spray Pattern: Jet
              • Gallons Per Hour: 24
              • Product Width (in.): 2
              • Product Height (in.): 2.5
              Indiana
              Indianapolis
              Hose Compression Fitting Male Hose Thread With Cap For Use With 5/8\
              Prices start at : 1.89 USD / each

              Acts as an end cap for low-pressure irrigation tubing applications! Compression x male hose thread fitting with cap for 5/8" poly tubing. Use item number BBFP50 NOTE: Does not fit our 5/8" soaker hose.

              Product Features

                • NOTE: Does not fit our 5/8" soaker hose. Use item number BBFP50: Product Features
                • Acts as an end cap for low-pressure irrigation tubing applications: Product Features
                Indiana
                Indianapolis
                Drip 3/4 in. Female Hose Thread x Drip Tubing Universal Tee Adapter
                Prices start at : 2.37 USD / each

                Drip irrigation tubing. Hose bib or garden hose. Compatible with all brands of 1/2 in. Compression fittings provide quick, leak-tight connection. This adapter provides simple connection of a drip system to a 3/4 in.
                •  Use with 1/2 in. or 5/8 in. drip irrigation tubing
                •  Sturdy plastic construction
                •  Simple connection of a drip system to a 3/4" hose bib or hose
                •  Use with 1/2 in. or 5/8 in. drip irrigation tubing (0.63 in. or 0.70 in. O.D.)
                • Returnable: 90-Day
                • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
                Indiana
                Indianapolis
                1/2 in. 0.700 O.D. Compression Coupling
                Prices start at : 0.92 USD / each

                Made from durable, UV resistant materials for long life in the landscape. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.
                •  Easily installed
                •  Resistance causes a compression seal that the water cannot penetrate
                •  Black fittings are 0.600 I.D. (inside diameter) x 0.700 O.D. (outside diameter)
                •  No special tools or glues needed
                • Package Quantity: 1
                • Product Height (in.): 3.25
                Indiana
                Indianapolis