Drip Irrigation Systems And Kits Irrigation Supplies Equipment For Sale In Clearwater

• Ship wt: .5 lb
• Length: 30 ft

Specs

• 1/2" inner diameter barb fittings: Specs
• Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs

• ✓ Also includes: tubing, stakes, 6-port staked manifold with 30 PSI pressure regulator, fine mesh filter and quick hose connector
• ✓ Save time and money
• ✓ Includes 12 watering devices - emitters and bubblers
• ✓ Up to 65 percent water savings compared to manual watering

• Package Quantity: 33
• Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

• Ship wt: 5 lbs.
• Length: 100ft.

Specs

• Arrow acts as an edge of pot locator.: Specs
• Directs spray toward plant, reducing undesired overspray.: Specs
• Includes 36" supply tube and spray stake.: Specs

• ✓ Drip emitter inlet size: 1/4 in. barb; drip emitter outlet side: nipple
• ✓ Operating pressure: 2 psi to 15 psi
• ✓ Drip emitter flow rates: 0.5 GPH at 5 psi, 0.8 GPH at 10 psi and 1 GPH at 15 psi (nominal)
• ✓ Raised barbed outlet prevents water runoff along the drip lateral

• Number of pieces included: 116
• Irrigation System Component: Kit

• ✓ Inlet and outlet size: 3/4” FNPT inlet X 3/4” MPT outlet or .700 OD drip size connection
• ✓ Used to automate a drip zone
• ✓ Can connect to any AC (24V) powered irrigation timers

• Manufacturer Warranty: 3 Year Warranty
• Color Family: Blacks
• Package Quantity: 1

Specs

• Ideal Hose Length: 100 feet
• 1/2in. MPT inlet x 1/2in. FPT outlet flow regulator, 5-90 psi: Specs
• 1/2in. FPT x 3/4in. female hose adaptor: Specs
• Rate: 1 gpm

• ✓ Operates at any pressure between 10 and 80 psi
• ✓ Connects to 1/2 in. sprinkler risers
• ✓ Built-in mini disk filter provides additional system protection and easy cleaning
• ✓ Built-in pressure compensating emitters provide consistent flow
• ✓ Provides 2 GPH flow rate from each outlet

• Kit Type: Drip Riser Kits

• ✓ Jar-top design allows for fast and easy, no-tools access for maintenance
• ✓ Stainless-steel mesh filter
• ✓ Shut-off valve
• ✓ Install using Toro grease caps (sold separately)

• Returnable: 90-Day
• Kit Type: Drip Valve Kit

• ✓ All drip irrigation connections are drip irrigation standard and additional parts are available at local hardware stores or home centers
• ✓ Can be automatically controlled with one of DIGs timers
• ✓ Used for potted plants, including herbs, strawberries, tomatoes and other vegetables

• Number of pieces included: 47
• Included: Tubing
• Returnable: 90-Day

• ✓ Constructed of durable UV resistant materials for long life
• ✓ Converts all pop-up sprinklers with a 1/2 in. threaded bottom inlet
• ✓ Comes with everything you need to convert a sprinkler head or ½ in. riser to 6 adjustable bubblers for watering flower beds, shrubs and landscaping
• ✓ Requires capping other sprinkler heads in the same zone, Rain Bird 1800CAPS sold separately

• Returnable: 90-Day
• Number of pieces included: 9

Specs

Product Features

• Adjustable for more or less moisture to your plants: Specs
• Easy to install: Product Features
• Electronic components run on a transformer for 24 volt AC current (transformer provided): Specs
• Has an LED light to signify the solenoid is energized: Product Features

• ✓ Pressure regulator helps provide even and consistent water flow throughout the entire system
• ✓ System can be connected to additional drip kits to cover larger areas
• ✓ Pre-assembled system saves time, no cutting or hole punching required
• ✓ Complete kit with preassembled components perfect for watering flower beds, gardens and lawns
• ✓ Slow and even water flow (0.35 Gallons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants

• Kit Type: Drip Irrigation Kit

• Produced from 100% recycled rubber: Product Features
• Description: 50 ft coupled hose
• Ship wt: 8 lb

• ✓ A discreet way to water your plants automatically
• ✓ Provides flexibility in irrigation frequency and low application rate minimizes soil compaction and surface runoff
• ✓ Kit also includes 20, in. micro tubing stake, 10 in. tee, 12 in. barbs,10 in. stake to hold the tubing to the ground, 4 in. tee, 1 in. coupling, 4 in. elbow, hole punch, one set of 10 goof plug, and 8 hose end to close the end
• ✓ Save money by significantly lowering the cost of system components compared to conventional irrigation systems

• Package Quantity: 1
• Irrigation System Component: Kit

Product Features

Product Benefits

• Comes with a punch that matches the width of the blade.: Product Features
• Precise punch-widths mean no guessing if your particular emitters are going to fit when you punch a hole into you: Product Benefits
• An extremely functional tool for spray stake and drip emitter installation: Product Features
• Description: Punch Blade 2 mm
• Allows a precise hole to be punched in poly tubing such as Toro Blue Stripe without slipping or driving through to the other side: Product Benefits
• Approx 9 and 3/8" long: Specs

• ✓ Saves up to 70% in water use
• ✓ Saves time: no hand watering
• ✓ For cold water use only
• ✓ Requires 1/2 in. drip tubing (not included)

• Included: Filter,Stakes,Tubing
• Irrigation System Component: Kit

• ✓ Includes 40 pressure compensating, self-piercing emitters
• ✓ Kit includes 1/4 in. tubing, pressure compensating self-piercing emitters, 1/4 in. tubing connections, goof plugs, bug stops, stakes, emitter tool and hose connection with filter all in a convenient bucket
• ✓ Start a new drip zone from an outside faucet to water your flower boxes, patio container plants or a small bed
• ✓ Patented Emitter Installation and Removal Tool makes it easy to work with spot watering emitters as well as 1/4 in. barbed fittings

• Returnable: 90-Day
• Package Quantity: 112

1

• Fitting Type: Push to Connect Fittings
• Product Height (in.): 1
• Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure: Yes
• Inner Diameter (in.): 1
• Color Family: Yellows / Golds
• Outer Diameter (in.): 1.315

• Product Height (in.): .6
• Material: ABS Plastic
• Fitting Type: Barb Fittings
• Manufacturer Warranty: 3 Year Warranty
• Outer Diameter (in.): 0.25
• Product Width (in.): .4 in