Agiseek home

Drip Irrigation Systems And Kits Horticulture Supplies For Sale In United States

Become a Partner
Maxijet Irrigation 5/8in Tubing Filter
Prices start at : 18.19 USD / each

Use as a filter right on the spigot! Low volume accessory filter.
United States
Irrigation Misty Mist Nozzle 1.25mm Diameter Red/White
Prices start at : 1.99 USD / each

Great for bedding plants, azaleas, foliage plants, or poinsettias! Misty-mist nozzles are used for overhead mist propagation, raising humidity levels or for mist cooling. Misting action is gentle on plants.

Specs

    • Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
    • Red/white nozzle: Specs
    • 1.25 mm dia.: Specs
    • The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
    United States
    Maxijet Irrigation Nursery Elbow Stake 25gal Container Assembly, 45 degree downward spray
    Prices start at : 1.79 USD / each

    Gives you a 360 degree spray that stays where you need it! Elbow stake stop-ring sets this stake at the perfect depth. 10.5 gph at 20 psi. With two shut off holes to crimp vinyl to close off water flow.
    United States
    Andrews 2-in-1 Sprinkler/Soaker Hose
    Prices start at : 13.09 USD / each

    Ideal for flower beds, borders, vegetable gardens, walkways, lawns and shrubs. Green plastic with tiny, round holes for gentle spray, turn it over, it's a soaker! Soaker or Sprinkler: Holes face up for an even, gentle spray or face down for a thorough...
    • Length: 30 ft
    • Ship wt: .5 lb
    United States
    Electronic Leaf Easy to Use Mist Controller
    Prices start at : 302.99 USD / each

    Easy to install! Has an LED light to signify the solenoid is energized! This sensor turns your own solenoid on and off. Works on the principle of evaporation - the weight of the mist settling on the stainless steel screen turns off the solenoid.

    Specs

      • Pre-wired with 20' of 18 gauge two strand bell wire for easy attachment to a 24 volt solenoid (not included): Specs
      • Dimensions are 12" H x 12" L x 4" W: Specs
      • Durable stainless steel housing: Specs
      • Adjustable for more or less moisture to your plants: Specs
      United States
      Toro Micro Distribution Irrigation Coupler Fitting 4mm BARB X BARB 100/BAG
      Prices start at : 2.59 USD / each

      It can be used with barb fittings such as this coupler to move water to a drip emitter or slipped over the NGE male emitter connection as an exit tubing, to direct water to plants.

      Specs

        • 100 per bag: Specs
        • To connect 1/4" tubing to 1/4" tubing: Specs
        United States
        Dramm Irrigation Slip Fit Pipe Nipple for 1/2-inch Straight Pipe Riser Installation
        Prices start at : 1.79 USD / each

        Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Slip Fit Pipe Nipple for 1/2-inch straight pipe risers.
        United States
        Rainbird Pop Up Sprinkler Body
        Prices start at : 3.19 USD / each

        After installation, you can add spray heads and rotate them by hand to aim the spray where you need it. Throw adjusts from 6-15'. Choose pop-ups for watering shrubs, small lawns and odd-shaped planting areas.
        • Clearance: 2- inch clearance
        United States
        Maxijet Irrigation Ag Stake Assembly, 12ft diameter spray max
        Prices start at : 1.79 USD / each

        (If you are operating at 35 psi or more we suggest using a pressure compensating control adapter, sold separately, product number 105.) 13" stake with 36" blue flexible vinyl supply tube with barb.
        United States
        Head Wrench for Irrigation
        Prices start at : 78.79 USD / each

        The Head Wrench is drop forged, precision machined and made in the USA. A specialty tool for irrigation professionals! The Head Wrench perfectly fits all brands of spray heads, all rotor heads and Jar-Top valves up to 4 in diameter.

        Product Features

          • Dig less: Product Features
          • Fits Jar-Top valves: Product Features
          • Bottom teeth engage OEM cap fins: Product Features
          • Replace & adjust heads fast: Product Features
          United States
          Maxijet Irrigation 5/8in Tubing Fitting: Figure 8 End Clamp
          Prices start at : 0.49 USD / each

          Figure 8 End Fitting
          United States
          Barb Fitting Plug For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
          Prices start at : 2.29 USD / each

          Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy! 1/2" barb plug for irrigation tubing and soaker hose.
          • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
          • Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No lock-ring or gear clamp needed: Product Benefits
          United States
          Maxijet Micro Distribution Irrigation Tubing Pressure Compensating Control Adapter
          Prices start at : 1.39 USD / each

          Controls the volume of water that flows to the landscape stake assemblies! Controlling to allow only 10.5 GPH of flow at any household pressure. NOTE: THIS REPLACES THE MCTB. SAME ITEM, BUT NOW THEY ARE SOLD INDIVIDUALLY FOR CUSTOMER CONVENIENCE.
          United States
          Maxijet Irrigation Low Volume Accessory: PVC To Hose Thread Fitting
          Prices start at : 1.29 USD / each

          MLA56 Low volume irrigation accesory PVC to hose thread fitting Slips into 3/4" PVC fitting, slips over 1/2" PVC pipe.
          United States
          Maxijet Irrigation additional patterns 3-in-1 swap-top head for Landscape Stake Assembly
          Prices start at : 4.69 USD / each

          Priced four per pack. Optional 3 in one swap top mister! Sprays 360 degrees full sown, 90 degrees quarter circle; center strip mister.
          United States
          Stainless Steel Hose Clamp
          Prices start at : 2.99 USD / each

          This is a handy clamp for securing hoses to barbed fittings! Stainless Steel clamp 9/16" to 1-1/16

          Specs

            • Adjusts with a flathead screwdriver: Specs
            • This is a handy clamp for securing hoses to barbed fittings, such as a soaker hose application or fitting a sprayer hose to a barbed male fitting on a spray gun or wand: Product Benefits
            • Expands from 9/16" to 1 and 1/16": Specs
            United States
            Toro Irrigation Pressure Compensating Emitters
            Prices start at : 22.99 USD / each

            Snap in installation for spacing to meet your requirements! Pressure compensating for a constant discharge between 8-60 psi. Male adapter design also can be used. One of the best performing pressure-compensating emitters available.
            • Ship wt: 4 lb
            • Rate: 0.5 gph flow rate
            United States
            Irrigation Misty Mist Nozzle 1.0mm Diameter Blue/White
            Prices start at : 1.99 USD / each

            Great for bedding plants, azaleas, foliage plants, or poinsettias! Misty-mist nozzles are used for overhead mist propagation, raising humidity levels or for mist cooling. Blue/white nozzle.

            Specs

              • The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
              • 1.00 mm dia.: Specs
              • Blue/white nozzle: Specs
              • Volume rated at .17gpm at 36psi and .22gpm at 73psi.: Specs
              United States
              Maxijet Irrigation Adjustable Drip/Spray Stake Assembly
              Prices start at : 36.39 USD / each

              NOTE: Priced per bundle of 25. Dripper stake adjusts to flow between 0 and 10 gph. A slow watering system for hanging baskets and small potted plants! A 5 inch stake can be easily placed where you want to water.

              Specs

                • Adjustable dripper stake: Specs
                • Feeder tube is 1/4 inch in diameter: Specs
                • Can be dialed to flow from a 1/2 GPH drip, up to a 10 GPH drip: Specs
                United States
                Barb Fitting Elbow For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
                Prices start at : 2.29 USD / each

                Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb elbow for irrigation tubing and soaker hose.

                Specs

                  • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
                  • 1/2" inner diameter barb fittings: Specs
                  United States
                  Maxijet Irrigation 5/8in Tubing Support Stake Accessory
                  Prices start at : 0.99 USD / each

                  Elevates 5/8" poly tubing! Use with Blue Stripe Tubing or Drip-in PC Pressure Compensating Dripline, among others.
                  • 3/4" x 7" overall: Specs
                  United States
                  Dramm Irrigation Threaded Pipe Nipple for 1/2-inch Threaded Pipe Risers
                  Prices start at : 1.79 USD / each

                  Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Threaded pipe nipple for 1/2-inch threaded riser installation.
                  United States
                  Hose Compression Fitting Tee For Use With 5/8\
                  Prices start at : 1.79 USD / each

                  Easy way to tee sections of 5/8" poly pipe in low-pressure applications! Compression "T" fitting for 5/8" and poly tubing. NOTE: Does not fit our 5/8" soaker hose. Use item number BBFT50.
                  • Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" soaker or 5/8" poly tubing for low-pressure operation: Specs
                  • NOTE: Does not fit our 5/8" soaker hose. Use item number BBFT50: Product Features
                  United States
                  Hose Compression Fitting Female Hose Thread For Use With 5/8\
                  Prices start at : 4.09 USD / each

                  Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot! Compression x Female Garden Hose Thread for 5/8" poly tubing. NOTE: Does not fit our 5/8" soaker hose.
                  • Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
                  • NOTE: Does not fit our 5/8" soaker hose. Use item number CR58F: Product Features
                  United States
                  Dramm Irrigation Nozzle Assembly Insert
                  Prices start at : 0.71 USD / each

                  Use for simple, glue free installation of Misty Mist nozzles! Assembly inserts for easy installation of nozzles. The assembly insert fits directly into PVC (schedule 40), aluminum or galvanized pipe w/o glue.
                  United States
                  Drip Irrigation Hole Punch Blade, Choose Size
                  Prices start at : 11.79 USD / each

                  An extremely functional tool for spray stake and drip emitter installation! Easy to use. Adjustable for use with 16mm to 32mm (5/8" to 1 1/4") tubing. Choose size of blade below.

                  Product Features

                    • An extremely functional tool for spray stake and drip emitter installation: Product Features
                    • Comes with a punch that matches the width of the blade.: Product Features
                    • Description: Punch Blade 2 mm
                    • Poly construction with metal punch: Specs
                    • Can be adjusted to fit 32, 25, 20 and 16 mm poly tubing with the turn of a knob: Product Features
                    • Size: 2mm
                    United States
                    Maxijet Irrigation Landscape Stake Assembly, with 3-in-1 swap-top head
                    Prices start at : 2.19 USD / each

                    Offers a unique mister valve for maximum spray pattern adjustment! Spray diameter varies from 3 foot to 4 foot depending on water pressure and nozzle used. Flow Control #MJ12 is available, purchased separately.

                    Specs

                      • Complete with a top that can do 320 degree full fan, 165 degree half and 180 degree half circle patterns: Specs
                      • 12" green landscape stake with 27" green flexible vinyl supply tube: Specs
                      United States