Agiseek home

Drip Irrigation Systems And Kits Farm Supplies For Sale In United States

Become a Partner
Maxijet Irrigation 5/8in Tubing Filter
Prices start at : 18.19 USD / each

Use as a filter right on the spigot! Low volume accessory filter.
United States
Irrigation Misty Mist Nozzle 1.25mm Diameter Red/White
Prices start at : 1.99 USD / each

Great for bedding plants, azaleas, foliage plants, or poinsettias! Misty-mist nozzles are used for overhead mist propagation, raising humidity levels or for mist cooling. Red/white nozzle, 1.25 mm dia.

Specs

    • Mist action: Specs
    • Red/white nozzle: Specs
    • The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
    • Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
    United States
    Maxijet Irrigation Nursery Elbow Stake 25gal Container Assembly, 45 degree downward spray
    Prices start at : 1.79 USD / each

    High quality UV inhibited resin for long life. 36" vinyl lead with barb included. Gives you a 360 degree spray that stays where you need it! Elbow stake stop-ring sets this stake at the perfect depth.
    United States
    Andrews 2-in-1 Sprinkler/Soaker Hose
    Prices start at : 13.09 USD / each

    The original 2-tube standby. Green plastic with tiny, round holes for gentle spray, turn it over, it's a soaker! Soaker or Sprinkler: Holes face up for an even, gentle spray or face down for a thorough soaking.
    • Ship wt: .5 lb
    • Length: 30 ft
    United States
    Electronic Leaf Easy to Use Mist Controller
    Prices start at : 302.99 USD / each

    Easy to install! Has an LED light to signify the solenoid is energized! This sensor turns your own solenoid on and off. When the water evaporates, the leaf rises and the cycle starts again.

    Specs

      • Adjustable for more or less moisture to your plants: Specs
      • Electronic components run on a transformer for 24 volt AC current (transformer provided): Specs
      • Dimensions are 12" H x 12" L x 4" W: Specs
      • Durable stainless steel housing: Specs
      United States
      Toro Micro Distribution Irrigation Coupler Fitting 4mm BARB X BARB 100/BAG
      Prices start at : 2.59 USD / each

      It can be used with barb fittings such as this coupler to move water to a drip emitter or slipped over the NGE male emitter connection as an exit tubing, to direct water to plants.

      Specs

        • 100 per bag: Specs
        • To connect 1/4" tubing to 1/4" tubing: Specs
        United States
        Dramm Irrigation Slip Fit Pipe Nipple for 1/2-inch Straight Pipe Riser Installation
        Prices start at : 1.79 USD / each

        Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Slip Fit Pipe Nipple for 1/2-inch straight pipe risers.
        United States
        Rainbird Pop Up Sprinkler Body
        Prices start at : 3.19 USD / each

        Reliable, low-pressure operation! 1/2" bottom female connection. Throw adjusts from 6-15'. Sold without spray heads and nozzles, choose from a variety of shrubbery spray heads and MPR (matched precipitation rate) nozzles.
        • Clearance: 2- inch clearance
        United States
        Maxijet Irrigation Ag Stake Assembly, 12ft diameter spray max
        Prices start at : 1.79 USD / each

        (If you are operating at 35 psi or more we suggest using a pressure compensating control adapter, sold separately, product number 105.) 13" stake with 36" blue flexible vinyl supply tube with barb.
        United States
        Head Wrench for Irrigation
        Prices start at : 78.79 USD / each

        The Head Wrench is drop forged, precision machined and made in the USA. A specialty tool for irrigation professionals! The Head Wrench perfectly fits all brands of spray heads, all rotor heads and Jar-Top valves up to 4 in diameter.

        Product Features

          • Angled jaw for easier access & precise grip: Product Features
          • Bottom teeth engage OEM cap fins: Product Features
          • Engineered specifically for rotor & spray heads: Product Features
          • Replace & adjust heads fast: Product Features
          United States
          Maxijet Irrigation 5/8in Tubing Fitting: Figure 8 End Clamp
          Prices start at : 0.49 USD / each

          Figure 8 End Fitting
          United States
          Barb Fitting Plug For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
          Prices start at : 2.29 USD / each

          Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy! 1/2" barb plug for irrigation tubing and soaker hose.

          Specs

            • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
            • 1/2" inner diameter barb fittings: Specs
            United States
            Maxijet Micro Distribution Irrigation Tubing Pressure Compensating Control Adapter
            Prices start at : 1.39 USD / each

            Controls the volume of water that flows to the landscape stake assemblies! Controlling to allow only 10.5 GPH of flow at any household pressure. SAME ITEM, BUT NOW THEY ARE SOLD INDIVIDUALLY FOR CUSTOMER CONVENIENCE.
            United States
            Maxijet Irrigation Low Volume Accessory: PVC To Hose Thread Fitting
            Prices start at : 1.29 USD / each

            MLA56 Low volume irrigation accesory PVC to hose thread fitting Slips into 3/4" PVC fitting, slips over 1/2" PVC pipe.
            United States
            Maxijet Irrigation additional patterns 3-in-1 swap-top head for Landscape Stake Assembly
            Prices start at : 4.69 USD / each

            Priced four per pack. Optional 3 in one swap top mister! Sprays 360 degrees full sown, 90 degrees quarter circle; center strip mister.
            United States
            Stainless Steel Hose Clamp
            Prices start at : 2.99 USD / each

            This is a handy clamp for securing hoses to barbed fittings! Stainless Steel clamp 9/16" to 1-1/16

            Specs

              • Expands from 9/16" to 1 and 1/16": Specs
              • This is a handy clamp for securing hoses to barbed fittings, such as a soaker hose application or fitting a sprayer hose to a barbed male fitting on a spray gun or wand: Product Benefits
              • Adjusts with a flathead screwdriver: Specs
              United States
              Toro Irrigation Pressure Compensating Emitters
              Prices start at : 22.99 USD / each

              Unique design uses a diaphragm, which allows the emitter to self-flush and inhibits back siphoning. Barbed inlet for installation directly into tubing or 1/4" feeder line. Snap in installation for spacing to meet your requirements! Pressure compensating...
              • Ship wt: 4 lb
              • Rate: 0.5 gph flow rate
              United States
              Irrigation Misty Mist Nozzle 1.0mm Diameter Blue/White
              Prices start at : 1.99 USD / each

              Great for bedding plants, azaleas, foliage plants, or poinsettias! Misty-mist nozzles are used for overhead mist propagation, raising humidity levels or for mist cooling. Misting action is gentle on plants.

              Specs

                • Blue/white nozzle: Specs
                • Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
                • 1.00 mm dia.: Specs
                • Mist action: Specs
                United States
                Maxijet Irrigation Adjustable Drip/Spray Stake Assembly
                Prices start at : 36.39 USD / each

                NOTE: Priced per bundle of 25. 8 stream spray pattern easily adjusts from a dripper to a 2-3 foot, 360 degree pattern by turning the top dial. Dripper stake adjusts to flow between 0 and 10 gph.

                Specs

                  • Can be dialed to flow from a 1/2 GPH drip, up to a 10 GPH drip: Specs
                  • Priced per bundle of 25: Specs
                  • Adjustable dripper stake: Specs
                  United States
                  Barb Fitting Elbow For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
                  Prices start at : 2.29 USD / each

                  Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb elbow for irrigation tubing and soaker hose.

                  Specs

                    • 1/2" inner diameter barb fittings: Specs
                    • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
                    United States
                    Maxijet Irrigation 5/8in Tubing Support Stake Accessory
                    Prices start at : 0.99 USD / each

                    Elevates 5/8" poly tubing! Use with Blue Stripe Tubing or Drip-in PC Pressure Compensating Dripline, among others.
                    • 3/4" x 7" overall: Specs
                    United States
                    Dramm Irrigation Threaded Pipe Nipple for 1/2-inch Threaded Pipe Risers
                    Prices start at : 1.79 USD / each

                    Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Threaded pipe nipple for 1/2-inch threaded riser installation.
                    United States
                    Hose Compression Fitting Tee For Use With 5/8\
                    Prices start at : 1.79 USD / each

                    Easy way to tee sections of 5/8" poly pipe in low-pressure applications! Compression "T" fitting for 5/8" and poly tubing. Use item number BBFT50. NOTE: Does not fit our 5/8" soaker hose.

                    Product Features

                      • Easy way to tee sections of 5/8" poly pipe or soaker hose in low-pressure applications: Product Features
                      • NOTE: Does not fit our 5/8" soaker hose. Use item number BBFT50: Product Features
                      United States
                      Hose Compression Fitting Female Hose Thread For Use With 5/8\
                      Prices start at : 4.09 USD / each

                      Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot! Compression x Female Garden Hose Thread for 5/8" poly tubing. Use item number CR58F. NOTE: Does not fit our 5/8" soaker hose.
                      • Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
                      • NOTE: Does not fit our 5/8" soaker hose. Use item number CR58F: Product Features
                      United States
                      Dramm Irrigation Nozzle Assembly Insert
                      Prices start at : 0.71 USD / each

                      Use for simple, glue free installation of Misty Mist nozzles! Assembly inserts for easy installation of nozzles. This insert is a threaded gasket that provides a quick installation and leak free seal for Dramm Irrigation Nozzles.
                      United States
                      Drip Irrigation Hole Punch Blade, Choose Size
                      Prices start at : 11.79 USD / each

                      An extremely functional tool for spray stake and drip emitter installation! Easy to use. Choose size of blade below. Adjustable for use with 16mm to 32mm (5/8" to 1 1/4") tubing.

                      Specs

                        • Description: Punch Blade 2 mm
                        • Poly construction with metal punch: Specs
                        • Precise punch-widths mean no guessing if your particular emitters are going to fit when you punch a hole into you: Product Benefits
                        • Approx 9 and 3/8" long: Specs
                        • Size: 2mm
                        • Comes with a punch that matches the width of the blade.: Product Features
                        United States
                        Maxijet Irrigation Landscape Stake Assembly, with 3-in-1 swap-top head
                        Prices start at : 2.19 USD / each

                        Offers a unique mister valve for maximum spray pattern adjustment! Spray diameter varies from 3 foot to 4 foot depending on water pressure and nozzle used. Does not include a shut-off, but it can be shut off by crimping supply tube and placing it in the...

                        Specs

                          • Spray diameter varies from 3 foot to 4 foot depending on PSI and nozzle position: Specs
                          • Complete with a top that can do 320 degree full fan, 165 degree half and 180 degree half circle patterns: Specs
                          United States