Drip Irrigation Systems And Kits Farm Supplies For Sale In Pittsburgh

Product Features

• NOTE: Does not fit our 5/8" soaker hose. Use item number BBFE50: Product Features
• A convenient way to make 90-degree bends with 5/8" poly pipe when using low-pressure applications: Product Features

• NOTE: Does not fit our 5/8" soaker hose. Use item number BBFP50: Product Features
• Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs

Specs

Product Features

• Outer diameter: 1-inch: Specs
• Leak rate: 0.58 gallons per foot, per hour at 30psi: Specs
• Standard brass garden hose couplers included: Specs
• Install above or below ground.: Product Features
• Adjust length per installation and water flow availability.: Product Features
• For both above and below ground use: Specs

Specs

• Expands from 9/16" to 1 and 1/16": Specs
• This is a handy clamp for securing hoses to barbed fittings, such as a soaker hose application or fitting a sprayer hose to a barbed male fitting on a spray gun or wand: Product Benefits
• Adjusts with a flathead screwdriver: Specs

• Description: 50 ft coupled hose
• Ship wt: 8 lb
• Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers: Specs

• Description: Micro Tubing 4mm x 100 ft coil
• Length: 100ft

• Clearance: 2- inch clearance

• Rate: 35GPH
• Connection: 1in Male NPT

Specs

• Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
• 1.00 mm dia.: Specs
• The nozzles produce a 6ft spray pattern when the water pipeline is 5ft above the crop.: Specs
• Mist action: Specs

Product Features

• Can be adjusted to fit 32, 25, 20 and 16 mm poly tubing with the turn of a knob: Product Features
• Comes with a punch that matches the width of the blade.: Product Features
• Description: Punch Blade 2 mm
• Size: 2mm
• An extremely functional tool for spray stake and drip emitter installation: Product Features
• Allows a precise hole to be punched in poly tubing such as Toro Blue Stripe without slipping or driving through to the other side: Product Benefits

Product Features

• Easy way to tee sections of 5/8" poly pipe or soaker hose in low-pressure applications: Product Features
• NOTE: Does not fit our 5/8" soaker hose. Use item number BBFT50: Product Features

• Description: 100-foot coil of 5/8-inch tubing
• Length: 100ft.

Specs

• Six foot piece of soaker hose with female couplers on each end, one "y" connector: Specs
• When coiled in two loops like the picture, the diameter of the coils is about 14": Specs

Specs

• Rate: 1 gpm
• 1/2in. FPT x 3/4in. female hose adaptor: Specs
• Ideal Hose Length: 100 feet
• 1/2in. MPT inlet x 1/2in. FPT outlet flow regulator, 5-90 psi: Specs

• Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
• NOTE: Does not fit our 5/8" soaker hose. Use item number CR58F: Product Features

• ✓ Loaded with 45 refrigerants and the capability of adding more through future firmware updates via Mini USB Cable
• ✓ Expanded Temperature Tolerance to go from Freezers to Rooftops
• ✓ Calculates: Superheat, Subcooling, Target Superheat, Vapor Saturation, Liquid Saturation
• ✓ Sturdy Plastic Casing
• ✓ Improved Valves are easier to open and close and create a stronger seal

• Brand: Fieldpiece

Specs

• 1.25 mm dia.: Specs
• Space the nozzles every 3ft and the waterlines 6ft apart.: Specs
• Red/white nozzle: Specs
• Volume rated at .27gpm at 36psi and .35gpm at 73psi.: Specs

• ✓ Combines an excellent fit, high-quality material and outstanding durability
• ✓ Resists heat, oil, grease, antifreeze and all approved coolant additives

• Brand: Motorcraft
• Assembled Product Dimensions (L x W x H): 18.88 x 5.38 x 2.50 Inches
• Model: MTCKH785

Specs

• 1/2" barb fittings: Specs
• Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs