Agiseek home

Drip Irrigation Systems And Kits Farm Supplies For Sale In Hartford

Become a Partner
Toro Irrigation 5/8in Tubing Fitting: Figure 8 End Clamp
Prices start at : 12.99 USD / each

Priced 100/bag. The standard figure eight clamp allows for simple completion at the end of the line. Provide a quick and easy installation of 5/8" Blue Strip Hose and 5/8" Drip In PC Dripline! These fittings are an internal hose fitting with an exterior...
Connecticut
Hartford
Aquaflo Soaker Hose Regulator Kits
Prices start at : 14.49 USD / each

This kit is accurate with pressures from 5-90 psi. So, if your hose is 100 feet long, choose ARK-1 below; or if your hose is 500 feet long, choose ARK-5 below. Adapters are also included to work with both 1/2-inch FPT and garden hose thread.

Specs

    • Rate: 1 gpm
    • 1/2in. MPT inlet x 1/2in. FPT outlet flow regulator, 5-90 psi: Specs
    • 1/2in. FPT x 3/4in. female hose adaptor: Specs
    • Recommended rate is 1 gpm per 100 feet of soaker hose: Specs
    Connecticut
    Hartford
    Hose Compression Fitting Tee For Use With 5/8\
    Prices start at : 1.99 USD / each

    Use item number BBFE50 NOTE: Does not fit our 5/8" soaker hose. A convenient way to make 90-degree bends when using low-pressure applications! Compression elbow for 5/8" poly tubing.
    • A convenient way to make 90-degree bends with 5/8" poly pipe when using low-pressure applications: Product Features
    • Compression Fittings: Measure slightly smaller than 5/8" to connect to outside of 5/8" poly tubing for low-pressure operation: Specs
    Connecticut
    Hartford
    Toro Irrigation 5/8in Tubing Fitting: 1/2in Tee FNPT
    Prices start at : 1.39 USD / each

    The standard figure eight clamp allows for simple completion at the end of the line Priced per fitting. Provide a quick and easy installation of 5/8" Blue Strip Hose and 5/8" Drip In PC Dripline! These fittings are an internal hose fitting with an exterior...
    Connecticut
    Hartford
    Maxijet Micro Distribution Irrigation Tubing Shutoff, Barb x Barb
    Prices start at : 0.55 USD / each

    Shut off barb for vinyl supply tube! Allows you to control the size of the spray pattern or to shut the water flow off all together. .160 Barb x .160 Barb
    Connecticut
    Hartford
    Barb Fitting Plug For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
    Prices start at : 2.29 USD / each

    Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy! 1/2" barb plug for irrigation tubing and soaker hose.
    • Makes installing end-plugs in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No lock-ring or gear clamp needed: Product Benefits
    • Outside barb measures slightly larger than 5/8" to connect to inside of 5/8" soaker, 1" Osmile, and 5/8" poly tubing: Specs
    Connecticut
    Hartford
    Maxijet Irrigation Nursery Stake B&B Assembly, 28in diameter spray max
    Prices start at : 1.69 USD / each

    An ideal watering solution for balled/burlap and containerized trees! Unique double down spray pattern produces an inner and outer 360 degree circle for a total spraying diameter up to 28" and is the only spray jet pattern designed to work at flows as...
    Connecticut
    Hartford
    Head Wrench for Irrigation
    ★★★★★
    Prices start at : 78.79 USD / each

    A specialty tool for irrigation professionals! The Head Wrench perfectly fits all brands of spray heads, all rotor heads and Jar-Top valves up to 4 in diameter. The Head Wrench is drop forged, precision machined and made in the USA.

    Product Features

      • Replace & adjust heads fast: Product Features
      • Fits Jar-Top valves: Product Features
      • Engineered specifically for rotor & spray heads: Product Features
      • Extract sprinkler bodies & broken risers with easy-out teeth: Product Features
      Connecticut
      Hartford
      Stainless Steel Hose Clamp
      Prices start at : 2.99 USD / each

      This is a handy clamp for securing hoses to barbed fittings! Stainless Steel clamp 9/16" to 1-1/16
      • Stainless steel: Product Features
      • This is a handy clamp for securing hoses to barbed fittings, such as a soaker hose application or fitting a sprayer hose to a barbed male fitting on a spray gun or wand: Product Benefits
      • Adjusts with a flathead screwdriver: Specs
      Connecticut
      Hartford
      Maxijet Irrigation 5/8in Tubing Support Stake Accessory
      Prices start at : 0.99 USD / each

      Elevates 5/8" poly tubing! Use with Blue Stripe Tubing or Drip-in PC Pressure Compensating Dripline, among others.
      • 3/4" x 7" overall: Specs
      Connecticut
      Hartford
      Toro Irrigation Y Filter
      Prices start at : 30.09 USD / each

      Easy element access for trouble-free maintenance, plus a 1/2" male threaded outlet with cap for quick flush cleaning. Working pressure range is 5-142 psi with maximum flow rate of 35 gpm for 1" filter, and 80 gpm for 1 1/2" filter.
      • Connection: 1in Male NPT
      • Rate: 35GPH
      Connecticut
      Hartford
      Pro Series 5/8-inch Soaker Hose, 200 ft Runs
      Prices start at : 23.99 USD / each

      We recommend that you either cover the hose with mulch or bury it up to 6 inches deep for longest life. Target Flow 4.65 Gal/Min per 50' based on a 10Gal/Min 40PSI Source The Pro Series is kink and crush resistant and will not freeze.

      Specs

        • 1/2" inner diameter: Specs
        • Cut to length or repair your soaker hose using our 50M58, CR58M, AND CR58F couplers: Specs
        • Ship wt: 8 lb
        Connecticut
        Hartford
        Maxijet Irrigation 5/8in Tubing Fitting: Figure 8 End Clamp
        Prices start at : 0.49 USD / each

        Figure 8 End Fitting
        Connecticut
        Hartford
        Toro Micro Distribution Irrigation Tubing, 4mm ID
        Prices start at : 14.99 USD / each

        Designed to distribute water to precise locations! Toro's micro distribution tubing is 1/4", constructed of LDPE. It can be used with 1/4" barb fittings to move water to a drip emitter or slipped over the NGE male emitter connection as an exit tubing.
        • Description: Micro Tubing 4mm x 100 ft coil
        • Length: 100ft
        Connecticut
        Hartford
        Irri-Gator Kit – 2000\'
        Prices start at : 323.00 USD / 1 Unit

        Roll rigid polyethylene tubing (no holes); 1 hose swivel; 1 filter; 1 pressure regulator; 1 adapter; 2 clamps; 1 punch tool; 20 perma-loc x barb fittings; 1 insert plug; 1 roll teflon tape; 2 perma-loc couplings and an installation instruction sheet.http://www.johnnyseeds.com/tools-supplies/watering-and-irrigation/drip-irrigation-systems/irri-gator-kit-2000-7038.0.htmlThis...
        Connecticut
        Hartford
        Barb Fitting Elbow For 5/8-in Poly Tube & Soaker Hose and 1-in Osmile Hose
        Prices start at : 2.29 USD / each

        Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy! 1/2" barb x barb elbow for irrigation tubing and soaker hose.
        • 1/2" inner diameter barb fittings: Specs
        • Makes installing 90-degree bends in our soaker hose and Blue-Stripe tubing easy; simply insert the barb into the hose or tubing. No locking ring clamp clamp or gear clamp needed: Product Benefits
        Connecticut
        Hartford
        Hose Compression Fitting Female Hose Thread For Use With 5/8\
        Prices start at : 4.09 USD / each

        Use item number CR58F. NOTE: Does not fit our 5/8" soaker hose. Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot! Compression x Female Garden Hose Thread for 5/8" poly tubing.
        • Compression Fittings: Measure slightly smaller than 5/8" to connect over outside of 5/8" poly tubing for low-pressure operation: Specs
        • Allows an easy way to connect poly distribution tubing to a standard garden hose or spigot; simply insert the tubing into the open end: Product Features
        Connecticut
        Hartford
        Dramm Irrigation Run Out Valve
        Prices start at : 14.49 USD / each

        Allows water to run out of the line, eliminating drip from all overhead nozzles! Run out valve designed to be installed at the end of 1" water line.

        Product Features

          • Can be connected directly to 1" PVC with PVC cement.: Product Features
          • Use PVC cement and a 1" to 3/4" PVC reducer bushing to connect Run-Out Valves to 3/4" PVC.: Product Features
          • Run-Out Valves require at least 15 PSI to work properly.: Product Features
          • When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles.: Product Features
          Connecticut
          Hartford
          Maxijet Irrigation Nursery Stake 1-15gal Container Assembly, 160 degree fan spray
          Prices start at : 21.99 USD / each

          36" blue flexible vinyl supply tube and barb by barb adapter. Works well from low pressures of 2-3 psi (3.7 to 4.5 gph) up to 20-35 psi (10.5 gph to 13 gph). NOTE: if you are operating at over 35 psi, we suggest using the pressure compensating control...

          Specs

            • Arrow acts as an edge of pot locator.: Specs
            • Includes 36" supply tube and spray stake.: Specs
            • Arrow sets proper height of stake in pot.: Specs
            Connecticut
            Hartford
            Dramm Irrigation Threaded Pipe Nipple for 1/2-inch Threaded Pipe Risers
            Prices start at : 1.79 USD / each

            Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Threaded pipe nipple for 1/2-inch threaded riser installation.
            Connecticut
            Hartford
            Irri-Gator Kit – 250\'
            Prices start at : 94.00 USD / 1 Unit

            Maximum working pressure of 15 PSI is recommended. Eliminates overhead spray, thereby reducing evaporation, conserving water, and discouraging the spread of foliar disease.Orifices, spaced every 12", allow for uniform saturation of the plant root zone;...
            Connecticut
            Hartford
            Dramm Irrigation Slip Fit Pipe Nipple for 1/2-inch Straight Pipe Riser Installation
            Prices start at : 1.79 USD / each

            Used to attach Misty Mist Nozzles directly to straight PVC pipe risers! Slip Fit Pipe Nipple for 1/2-inch straight pipe risers.
            Connecticut
            Hartford
            Maxijet Irrigation 8in Extension Accessory
            Prices start at : 0.49 USD / each

            Adds 8" height to Mister Landscaper stake assemblies! 8" rigid with male threads on one end, female on the other.
            Connecticut
            Hartford
            1-1/2 HP Plastic Irrigation Pump
            Prices start at : 316.35 USD / each

            Easy service design for quick access to normal wear parts 2"jsuction and 1-1/2" discharge pip sizes. Ideal for lawn sprinkling applications. All units are dual voltage 115/ 230 v Factory set at 230 v Wiring diagrams are permanently affixed on each motor...
            • Assembled Product Dimensions (L x W x H): 18.31 x 18.31 x 11.81 Inches
            • Model: EFLS15P
            • Brand: ECO-FLO Products
            Connecticut
            Hartford
            12\
            Prices start at : 27.08 USD / each

            12" x 17"; Green; Irrigation Control Valve Box Cover. 12" x 17" Green Irrigation Control Valve Box Cover Only One 12" x 17"; Green; Irrigation Control Valve Box Cover.
            • Brand: Nds
            • Manufacturer Part Number: 113C
            Connecticut
            Hartford
            Ecopoly PEX Manifold 8 Port With Valves
            Prices start at : 68.8 USD / each

            Ecopoly PEX Manifold 8 Port With Valves Merchandise
            • ✓ Easy to install
            • ✓ Works on all brands of PEX and PERT pipe
            • Brand: Ecopoly
            Connecticut
            Hartford
            9714429,DRIP WATERING RISER ADAPTERS,FOR LOW-FLOW SPRINKLERS \
            Prices start at : 4.85 USD / each

            Outlet: 10-32 FNFT. Raindrip Sprinkler-To-Drip Adapter Connects low-volume sprinklers to 1/2 In. MPT (male pipe thread). Inlet: 1/2" FPT. Connects Raindrip low-flow sprinklers to 1/2" MPT sprinkler risers.
            • Features: r336ct - sold as 20 units
            • Brand: Raindrip
            Connecticut
            Hartford
            Agricultural market place, farms, farmers, land