Agiseek home

Drip Irrigation Kits Drip Irrigation For Sale In Reno

Become a Partner
Planters Drip Kit - 12 Dripper Set
Prices start at : 8.99 USD / box

Long each) and a 12 ft. Requiring no design skills or special tools for install, each kit includes a pressure regulator, hose connector, 3 drippers (2 ft. Perfect for potted plants, hanging baskets and vegetable gardens, the Planters Drip Kit features...
  •  System can water 3 to 4 planters depending on size and spans 12 ft.
  •  Slow and even water flow (0.35 Galllons per hour per dripper) reduces water waste up to 70% while providing sufficient hydration for your plants
  •  Backflow preventer keeps water from re-entering the main water supply and potential contamination
  •  Bleed function allows you to flush any debris from system
  • Kit Type: Drip Irrigation Kit
  • Manufacturer Warranty: 2 Years
Nevada
Reno
Micro Sprinkler Kit
Prices start at : 10.99 USD / box

The Elgo Micro Sprinkler Kit is a pre-assembled micro-irrigation system that conveniently connects directly to your hose or faucet outlet. Interchangeable nozzles provide uniform watering and reduce water waste with a 180° or 360° watering range.
  •  Pressure regulator helps provide even and consistent water flow throughout the entire system
  •  Pre-assembled system saves time, no cutting or hole punching required
  •  Fully assembled kit provides 180 sq. ft. of coverage to you flower beds and gardens
  •  System can be connected to additional drip kits to cover larger areas
  • Returnable: 90-Day
  • Kit Type: Drip Irrigation Kit
Nevada
Reno
1/4 in. Barb Elbows (10-Pack)
Prices start at : 1.96 USD / each

Barbed Elbow is used to provide a secure connection of two pieces of 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. The DIG 1/4 in. Micro tubing, soaker hose or drip-line around sharp corners.
  • Product Height (in.): .63
  • Product Width (in.): .4 in
  • Package Quantity: 10
  • Material: ABS Plastic
  • Connection: Sweat x Sweat
  • Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit: Yes
Nevada
Reno
Drip System Expansion and Repair Kit
Prices start at : 24.97 USD / each

Easily repair tubing breaks using the pail's self-dispensing 250 ft. All components are the same high quality Rain Bird drip devices installed by professional irrigation contractors.
  •  Includes 40 pressure compensating, self-piercing emitters
  •  Suggesting where common problems may occur and showing how to correct them by adjusting flow or fixing clogs and breaks

112

    • Returnable: 90-Day
    • Number of pieces included: 112
    • Included: Filter,Garden Hose Connection,Sprinklers,Stakes
    • Package Quantity: 112
    Nevada
    Reno
    30 psi Pressure-Regulating Filter
    Prices start at : 18.97 USD / each

    The 30 psi Pressure-Regulating Filter helps maintain drip and micro-irrigation systems. Also has a 3/4 in. This black filter has a pressure rating of 30 psi.
    •  Connect to valve and supply line
    •  Black
    •  Helps maintain drip and micro-irrigation systems
    •  UV resistant plastic for long life
    • Product Depth (in.): 1.3
    • Product Height (in.): 6.6
    Nevada
    Reno
    1/2 in. Barbed Tees (4-Pack)
    Prices start at : 3.45 USD / each

    Barbed Tees (4-Pack) are used to connect 3 pieces of 1/2 in. Cut, connect and secure tubing and emitters to individual plants. Tubing in a T shape. The tees help you add supplemental watering to individual plants.
    •  Cut, connect and secure tubing and emitters to individual plants
    •  Non-threaded
    • Package Quantity: 4
    • Connection: Comp
    • Returnable: 90-Day
    • Product Height (in.): .5
    Nevada
    Reno
    1/2 in. Plastic 90 Degree S x S x S Universal Elbow
    Prices start at : 1.01 USD / each

    The Universal Elbow connects all major brands of 1/2 in. To connect, slide tubing over the insert and hand twist the outer nut to cinch the tubing in place. To be used outdoors with cold water only.
    •  Reusable - loosen nut to remove tubing
    •  Universal fitting
    •  Works with all major brands of 1/2 in. distribution tubing - (0.620 in. - 0.710 in. OD)
    • Product Width (in.): 4
    • Inner Diameter (in.): 0.5
    • Pressure Rating: 120
    Nevada
    Reno
    1/4 in. Barb Connectors (10-Pack)
    Prices start at : 1.67 USD / each

    The DIG 1/4 in. Micro tubing, soaker hose or drip-line. Each connection offers raised barbed ends to ensure a strong, water tight fit. Barb Connector is used to provide a secure connection of two pieces of 1/4 in.
    • Product Width (in.): 0.25
    • Fitting Type: Barb Fittings
    • Returnable: 90-Day
    • Easy to Use: Yes
    • Drip Irrigation Fitting Type: Coupling
    • Inner Diameter (in.): .25
    Nevada
    Reno
    1/2 in. Easy-Fit Coupling
    Prices start at : 0.97 USD / each

    Connect pieces of hose quickly and easily with this Easy Fit 1/2 in. Made for use in a sprinkler and irrigation system. Easy push-together installation connects 2 pieces of 1/2 in.
    •  Requires up to 50% less force to install tubing
    •  Quick Easy Fit push-together assembly speeds installation
    •  Universal coupler quickly connects two lengths of 1/2" Drip tubing in a straight line
    • Pressure Rating: 0 to 60 psi
    • Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.
    • Connection: Comp
    Nevada
    Reno
    2 GPH Pressure Compensating Dripper (10-Pack)
    Prices start at : 5.47 USD / each

    An internal silicone diaphragm provides a self-cleaning mechanism to keep drippers clog free. DIG pressure compensating drippers help ensure your outdoor plants and landscaping are getting just the right amount of water.
    • Product Depth (in.): 0.5
    • Product Width (in.): .5
    • Returnable: 90-Day
    • Delivers a flow rate of 2 GPH: Yes
    • Maximum Gallons Per Minute: 0.03
    • Irrigation System Component: Drip Irrigation Emitter
    Nevada
    Reno
    1/4 4-Jet Plastic Stream Bubbler
    Prices start at : 21.47 USD / each

    The nozzle has a quarter-circle pattern spray and the flow adjusts from a light trickle to full flow. It is made of durable plastic and contains an inlet filter to prevent debris clogs.
    • Returnable: 90-Day
    • Tubing Size: 1/2"
    • Product Length (in.): 4 in
    • Irrigation System Component: Drip Irrigation Emitter
    • Maximum Gallons Per Minute: 3.5
    • Spray Pattern Degrees: Full Circle
    Nevada
    Reno
    Fast Fittings 1 in. x 1 in. Insert Elbow (25-Pack)
    Prices start at : 38.5 USD / bag

    Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market. The Blazing Fast Fittings 1 in. Insert Elbow is the easiest way to connect Polyethylene pipe for irrigation systems.
    •  Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
    •  Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
    •  Suggested operating pressure is 10-80 PSI
    •  Slips easily into pipe without the need for tools, clamps, or extra fittings
    • Package Quantity: 25
    • Pressure Rating: 10-80 PSI
    Nevada
    Reno
    Drip and Soaker Vegetable Watering Kit
    Prices start at : 19.92 USD / each

    Everything is included to get your system installed and is easily expanded to adapt to your growing landscape. The DIG drip soaker tape kit is perfect for watering a vegetable garden or any row plantings of flowers or shrubs.
    • Manufacturer Warranty: 3 year
    • Number of pieces included: 19
    • Package Quantity: 1
    • .8 GPH per emitter spaced every 12 in.: Yes
    • Returnable: 90-Day
    • Irrigation System Component: Kit
    Nevada
    Reno
    25 psi Filter/Pressure Regulator with 3/4 in. Pipe Thread
    Prices start at : 16.85 USD / each

    Fewer parts and fittings reduce the chances of leaks occurring at threaded connections. The DIG D54 combines a 155 mesh screen filter with a 25 psi preset pressure regulator in one product for the protection of a drip irrigation systems and components.
    •  2 products in one filter and pressure regulator
    •  Filter screen is easily removed for cleaning and maintenance
    • Minimum Regulated Pressure (psi): 25
    • Product Width (in.): 5
    • Manufacturer Warranty: 3 year warranty
    • Maximum Gallons Per Minute: 6
    Nevada
    Reno
    1 GPH Button Dripper (25-Pack)
    Prices start at : 6.97 USD / each

    Chemical and clog resistant, the drippers are an economical choice for systems with short lengths of drip tubing. Drip tubing and snapping the barbed side of the dripper into the 1/2 in.
    • Returnable: 90-Day
    • Irrigation System Component: Drip Irrigation Emitter
    • Spray Pattern Degrees: 360 Degrees
    • Product Width (in.): 5
    • Maximum Gallons Per Minute: 0.016
    • High-quality materials ensure a long life: Yes
    Nevada
    Reno
    25 psi 3/4 in. F x MPT Regulator
    Prices start at : 5.39 USD / each

    For outdoor use with cold water only. The Orbit 25 psi Faucet Regulator keeps water pressure to 25 psi. This reduces high pressure damage and drip system failure.
    • Minimum Regulated Pressure (psi): 25
    • Reduces to 25 PSI: Yes
    • Maximum Inlet Pressure Allowed (psi): 80
    • Returnable: 90-Day
    • Color Family: Blacks
    • Inlet Diameter (in.): 0.75
    Nevada
    Reno
    0-10 GPH Adjustable Dripper on 360-Degree Spike (25-Pack)
    Prices start at : 17.99 USD / each

    As your plants grow the flow can be increased as they require more water to flourish. The DIG Adjustable-Flow Multi-Stream Dripper on Stake offers controlled watering feature to accommodate a variety of different plants within your system.

    2

      • Dripper Type: Adjustable
      • Dripper head can be removed for easy cleaning: Yes
      • Product Depth (in.): 2
      • Product Width (in.): 2
      • Returnable: 90-Day
      • Irrigation System Component: Drip Irrigation Emitter
      Nevada
      Reno
      1-16 GPH Inline Dripper/Emitter (10-Pack)
      Prices start at : 4.47 USD / package

      To be used outdoors with cold water only. This multi-stream dripper head is an efficient and gentle way to spot water plants and shrubs. The control knob adjusts water flow and spray distance.
      • For cold water use only: Yes
      • Product Height (in.): 5.75
      • Irrigation System Component: Drip Irrigation Emitter
      • Spray Pattern Degrees: 360 Degrees
      • Package Quantity: 10
      • Product Width (in.): 3.5
      Nevada
      Reno
      1/2 in. Drip-Lock Push-Fit End Cap
      Prices start at : 1.58 USD / each

      It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.
      •  Removable fitting
      •  Made of durable, UV-resistant materials for years of dependable use
      •  1/2 in. fitting
      •  For irrigation applications only
      •  Works with the most common sizes of 1/2 in. drip tubing (0.670-.710 O.D.)
      • Color Family: Blacks
      Nevada
      Reno
      Fast Fittings 1 in. x 1 in. x 1 in. Insert Tee (25-Pack)
      Prices start at : 46.62 USD / bag

      Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market. The Blazing Fast Fittings 1 in. Insert Tee is the easiest way to connect Polyethylene pipe for irrigation systems.
      •  O-ring material: EPDM
      •  Contains no metal or chloride making it the most eco-friendly fitting on the market
      •  Flow rates are comparable to traditional insert fittings
      •  Body material: ABS
      • Product Width (in.): 3.4375
      • Product Length (in.): 5.875
      Nevada
      Reno
      1/2 in. Poly Tubing x 3/4 in. Pipe Thread Swivel Adapter
      Prices start at : 1.67 USD / each

      Easily connect to a 3/4 in. Poly tubing compression fitting. Pipe thread connector by 1/2 in. Pipe thread outlet to start your drip irrigation system. Compression fittings are a simple and secure way to assemble your drip irrigation system.
      •  Made from high-quality materials for long life in the landscape
      •  Will not suppress water flow
      • Outer Diameter (in.): .75
      • Drip Irrigation Fitting Type: Adapter
      • Fitting Type: Compression Fittings
      • Connection: Comp x FIP
      Nevada
      Reno
      Gro Garden Sprinkler Kit
      Prices start at : 43.7 USD / each

      With the Gro Garden Sprinkler Kit you're just 3 simple steps away from a whole season of hassle-free watering. It can be configured in a snap to fit your specific yard space, timer or spigot.
      •  Works with miracle-gro liquefied universal feeder or any timer
      •  Saves time versus hand-watering
      •  Recommended for flower and vegetable gardens, raised beds and shrubs
      •  Quick connect technology to easily attach (and detach) from any outdoor spigot
      •  Delivers water where plants need it
      • Package Quantity: 1
      Nevada
      Reno
      1/4 Pattern Low-Volume Sprinkler (5-Pack)
      Prices start at : 1.83 USD / bag

      This low volume sprinkler head is an efficient and gentle way to water flower beds. Easily threads on a 1/4 in. Riser or sprinkler stake. The control knob adjusts water flow and spray distance.
      •  For cold water use only
      •  Black in color
      • Pressure Rating: 25 psi
      • Spray Pattern: Drip
      • Package Quantity: 5
      • Manufacturer Warranty: 5 Years
      Nevada
      Reno
      1/4 in. Polyflex Riser Stake
      Prices start at : 0.97 USD / each

      The stake holds spray devices above plants. This way, the spray achieves good water coverage. Polyflex Riser Stake helps you apply water like a spray head on an underground system.
      •  Holds spray devices above plants so that the spray achieves good water coverage
      •  Includes 8 in stake to hold spray in place
      •  Holds spray devices above plants for good water coverage
      • Package Quantity: 1
      • Color Family: Blacks
      • Product Height (in.): .25
      Nevada
      Reno
      1/2 in. MPT to 12-1/4 in. Polyflex Riser
      Prices start at : 1.1 USD / each

      Polyflex Riser accepts all Xeri-Bubbler and trade, Xeri-Spray and trade and 10-32 threaded PC drip emitter emission devices. (15/21) NPT x flex-riser adapter (FRA-050) for Xeri-Bug, Xeri-Bubbler and Xeri-Spray applications.
      •  Product includes a flexible riser for longer life
      •  The total 12 1/4 in. height (includes fitting height) allows water to clear small obstacles and ensures good distribution
      •  This product includes a flexible riser for longer life
      •  Ideal for shrub plantings, trees, containers and flower beds
      • Returnable: 90-Day
      • Product Height (in.): .5
      Nevada
      Reno
      1/2 in. Drip-Lock Elbow
      Prices start at : 1.19 USD / each

      It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.
      •  Easy-to-push-on fitting
      •  Removable fitting
      •  Convenient installation and maintenance
      • Package Quantity: 1
      • Product Length (in.): 2.25
      • Product Width (in.): 1.25
      Nevada
      Reno
      Drip 4 GPH Flag Dripper (25-Pack)
      Prices start at : 8.47 USD / each

      Barbed ends for direct insertion into the side of 1/2 in. Non-pressure compensating. High-flow flag dripper with shutoff for controlled watering of garden and landscaping plants as well as larger containers.
      •  Large water passages to help prevent clogging
      •  Constructed of highly durable UV and chemical-resistant materials to assure long life
      •  25 Pack - Non-pressure compensating, high flow 4.0 GPH
      • Irrigation System Component: Drip Irrigation Emitter
      • Dripper Type: Flag
      • Product Height (in.): 1.5
      Nevada
      Reno