Drip Irrigation Kits Drip Irrigation For Sale In Edmonton

Maverick 2 GPH 12-Outlet Drip Manifold Kit

★★★★★

Prices start at : 12.5 USD / each

Easily convert a sprinkler riser to a 12-outlet drip system. The DIG Maverick 12-outlet drip irrigation manifold kit provides a quick solution for saving water. Includes 100 ft. Incorporating a Maverick drip manifold can save water while increasing your...

✓ Can be used with 1/4 in. drip-line, DIG model SH50
✓ Connects to 1/2 in. sprinkler risers

Returnable: 90-Day
Color Family: Blacks
Kit Type: Drip Riser Kits
Number of pieces included: 47

Alberta

Edmonton

1800 Pop-Up to Drip Bubbler Conversion Kit

★★★★★

Prices start at : 19.97 USD / each

Ideal for flower beds, shrubs and other closely spaced plants. This kit includes cut-to-length tubing and maximizes watering efficiency by hydrating the root zone and eliminating overspray.

✓ Converts a Rain Bird 1800 series sprinkler with no digging
✓ Requires capping other sprinkler heads in the same zone, Rain Bird 1800CAPS sold separately
✓ Eliminate wasteful overspray and improve plant health while using less water

Kit Type: Drip Irrigation Kit
Irrigation System Component: Kit
Package Quantity: 9

Alberta

Edmonton

1/2 in. 0.710 O.D. Compression Tee

★★★★★

Prices start at : 0.99 USD / each

Made from durable, UV resistant materials for long life in the landscape. Easily connect 1/2 in. Ideal for repairing or expanding your drip irrigation system. Poly tubing and create a strong, water tight seal without the use of glues or special tools.

Outer Diameter (in.): .50
Fitting Type: Compression Fittings
Resistance causes a compression seal that the water cannot penetrate: Yes
Color Family: Blacks
Package Quantity: 1
Connection: Comp x Comp x Comp

Alberta

Edmonton

1/2 in. PVC Pipe Thread x Hose Thread Conversion Elbow

★★★★★

Prices start at : 2.17 USD / each

Wrap two to three rounds of TEFLON tape on the ½ in. Male hose thread any fitting, ¾ in. Swivel adapter with a ¾ in. MHT elbow into the riser (no tool is needed). Female thread (FHT).

Fitting Type: Drip Adapters
Connection: FIP x MHT
No glue or special tools required for installation: Yes
Package Quantity: 1
Material: ABS Plastic
Product Height (in.): 2.125

Alberta

Edmonton

1/4 in. Barb Tee (Pack of 25)

★★★★★

Prices start at : 2.56 USD / package

Double barb design adds additional holding power. Distribution (or soaker) tubing. For outdoor use and cold water only. Used to connect all brands of 1/4 in. Distribution or soaker tubing.

✓ For outdoor use only
✓ For drip irrigation applications only
✓ For cold water use only

Fitting Type: Barb Fittings
Pressure Rating: 80
Product Height (in.): 5.75

Alberta

Edmonton

Drip 4 GPH Flag Dripper (25-Pack)

★★★★★

Prices start at : 8.47 USD / each

Drip irrigation tubing or use in-line with 1/4 in. High-flow flag dripper with shutoff for controlled watering of garden and landscaping plants as well as larger containers. Barbed ends for direct insertion into the side of 1/2 in.

✓ 25 Pack - Non-pressure compensating, high flow 4.0 GPH
✓ Dripper has shutoff
✓ Dual barbed ends for use with 1/4 in. and 1/2 in. drip tubing

Irrigation System Component: Drip Irrigation Emitter
Spray Pattern Degrees: Full Circle
Manufacturer Warranty: If a purchaser of any new Rain Bird consumer product becomes dissatisfied with it for any reason, he may return it to the retailer where it was purchased within a reasonable time for a full refund.

Alberta

Edmonton

1 GPH Compensating Drippers (10-Pack)

★★★★★

Prices start at : 5.74 USD / each

Labyrinth water passage regulates the flow of water to provide the most accurate and consistent irrigation despite pressure fluctuations and varying landscape elevations. An internal silicone diaphragm provides a self-cleaning mechanism to keep drippers...

Spray Pattern: Drip
Gallons per Hour: 1
Package Quantity: 10
Manufacturer Warranty: 3 Year Warranty
Flow regulated for long runs of 1/2 in. poly tubing: Yes
Tubing Size: 1/4"

Alberta

Edmonton

Fast Fittings 1 in. x 1 in. MPT Insert Male Adapter (25-Pack)

Prices start at : 28.27 USD / bag

MPT Insert Male Adapter is the easiest way to connect Polyethylene pipe for irrigation systems. The Blazing Fast Fittings 1 in. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.

✓ Maximum operating pressure: 80 PSI for #80 pipe, 100 PSI for #100 pipe, and 160 PSI for #160 pipe
✓ Burst pressure exceeds 400 PSI; however, this product is not intended to be used on main lines or under constant pressure
✓ Contains no metal or chloride making it the most eco-friendly fitting on the market

Material: Acrylonitrile Butadiene Styrene (ABS)
Product Height (in.): 1.1875
Drip Irrigation Fitting Type: Coupling

Alberta

Edmonton

Maverick 4 GPH 12-Outlet Drip Manifold

Prices start at : 8.66 USD / each

Incorporating a Maverick drip manifold can save water while increasing your plants health by supplying water to where it is needed most, at the plants root zone minimizing wasteful evaporation.

✓ Built-in mini disk filter provides additional system protection and easy cleaning
✓ Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
✓ Provides 4 GPH flow rate from each outlet
✓ Operates at any pressure between 10 and 80 psi

Included: Stakes,Tubing
Returnable: 90-Day

Alberta

Edmonton

Blue Stripe Drip Emitters (5-Pack)

★★★★★

Prices start at : 7.35 USD / each

These emitters feature a full-circle pattern and an adjustable throw distance measuring up to 3 ft. Toro Blue Stripe Drip Emitters (5-Pack) incorporate a flow and adjustment system that fine-tunes the flow of water from a gentle stream to a slow drip...

✓ Provides a full-circle watering pattern
✓ Throw distance can be adjusted to up to 3 ft. in diameter
✓ Provides spot irrigation for small plants, container plants and flower beds

Spray Pattern: Adjustable
Color Family: Blacks
Product Width (in.): 4.75

Alberta

Edmonton

Blue Stripe Bubbler (5 per Bag)

Prices start at : 7.76 USD / each

It comes on a stake to provide easy placement. High and is compatible with 1/4 in. The Toro Blue Stripe Bubbler is ideal for small trees and shrubs whose growth requires increasing flow rates.

Irrigation System Component: Drip Irrigation Emitter
Product Height (in.): 6.5
Maximum Gallons Per Minute: .33
Spray Pattern: Flood
Spike provides easy placement: Yes
Tubing Size: 1/4"

Alberta

Edmonton

Drip 1/4 in. Barbed On/Off Valve (2-Pack)

★★★★★

Prices start at : 1.97 USD / each

Barbed ends permit easy, leak-free insertion into 1/4 in. Drip tubing runs to different sections of your plant watering area. Easily adjust or shut off flow in 1/4 in. Top cap turns to adjust flow.

✓ 1/4 in. barbed ends
✓ Top cap turns to adjust flow
✓ Constructed of highly durable UV and chemical-resistant materials to assure long life

Material: Plastic
Product Height (in.): 1.5
Connection: Barb x Barb

Alberta

Edmonton

1/2 in. Plastic 90 Degree S x S x S Universal Elbow

Prices start at : 1.01 USD / each

To be used outdoors with cold water only. The Universal Elbow connects all major brands of 1/2 in. To connect, slide tubing over the insert and hand twist the outer nut to cinch the tubing in place.

✓ Reusable - loosen nut to remove tubing
✓ Hand twist the outer nut to cinch the tubing in place.
✓ For cold water use only
✓ For outdoor use only
✓ Easy to use and install

Manufacturer Warranty: 1

Alberta

Edmonton

Drip 1 GPH Flag Dripper (25-Pack)

★★★★★

Prices start at : 8.47 USD / each

Drip irrigation tubing or use in-line with 1/4 in. Low-flow flag dripper with shutoff for controlled watering of garden and landscaping plants as well as larger containers. Barbed ends for direct insertion into the side of 1/2 in.

✓ Low-flow 1.0 GPH
✓ Flag style dripper
✓ Dripper has shutoff

Color Family: Blacks
Spray Pattern: Drip
Spray Pattern Degrees: Full Circle

Alberta

Edmonton

Blue Stripe Drip 1/2 in. Tees (4-Pack)

★★★★★

Prices start at : 6.7 USD / each

Tees (4-Pack) help you branch a line of tubing in 2 directions. They are designed to provide reliable installation but can be removed if needed. The Toro Blue Stripe Drip 1/2 in.

Package Quantity: 4
Drip Irrigation Fitting Type: Tee
Material: ABS Plastic
Returnable: 90-Day
Product Width (in.): 4.75
Product Height (in.): 6.5

Alberta

Edmonton

Drip 1/2 in. Barbed On/Off Valve

★★★★★

Prices start at : 4.3 USD / each

Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing. Easily adjust or shut off flow in 1/2 in. Avoid over- or under-watering of plants with different moisture needs in the zone.

Drip Irrigation Fitting Type: Valve
Material: Plastic
Pressure Rating: 40
High quality, UV resistant materials: Yes
Fitting Type: Barb Fittings
Inner Diameter (in.): .63

Alberta

Edmonton

Drip Irrigation Watering Kit

★★★★★

Prices start at : 16.47 USD / each

The DIG Drip Irrigation Watering Kit is ideal for watering shrubs, trees, flowers, bushes and more. This water conserving drip system covers up to 150 sq. Everything is included for a complete installation, no gluing is required.

✓ Designed for new and existing landscapes including difficult terrain, such as slopes and oddly shaped areas
✓ Saves water by delivering water right where it is needed most, at the plant root zone
✓ Includes backflow preventer so water does not re-enter the main water supply through siphoning

Returnable: 90-Day
Number of pieces included: 51
Kit Type: Drip Irrigation Kit

Alberta

Edmonton

3/4 in. Pipe to 1/2 in. Drip Adapter

Prices start at : 1.99 USD / each

Our line-up of fittings offer a faster, more convenient way to make more drip connections in a lot less time. Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but its most convenient and efficient...

✓ Black in color
✓ Provides a durable, leak-resistant connection that stays in place season after season
✓ For drip or micro-irrigation applications

Fitting Type: Push to Connect Fittings,Universal Fittings
Product Length (in.): 4.5 in
Package Quantity: 1

Alberta

Edmonton

Drip Threaded Quarter Pattern Microspray (2-Pack)

★★★★★

Prices start at : 1.87 USD / each

This 90 degree pattern, adjustable micro spray is ideal for corner positioning in landscaping beds or where you may wish to direct low-volume watering to an individual shrub or tree.

Gallons Per Hour: 30
Color Family: Blacks
Irrigation System Component: Drip Irrigation Emitter
Returnable: 90-Day
Package Quantity: 2
Adjusts from 0 - 31 GPH flow, 0 ft. - 10 ft. distance: Yes

Alberta

Edmonton

1/2 in. 0.710 O.D. Compression Elbow

Prices start at : 1.07 USD / each

.50

Outer Diameter (in.): .50
Inner Diameter (in.): .50
Returnable: 90-Day
Resistance causes a compression seal that the water cannot penetrate: Yes
Drip Irrigation Fitting Type: Elbow
Product Length (in.): 2.5

Alberta

Edmonton

6 in. Tubing Stake (10-Pack)

★★★★★

Prices start at : 1.56 USD / package

Durable construction provides year of reliable use. Used to hold 1/4 in. Works with all drip systems. Tubing and drip heads at the desired height.

✓ For outdoor use only
✓ Heavy-duty plastic construction
✓ Durable and long lasting material

Product Height (in.): 8.75
Package Quantity: 10
Material: Plastic

Alberta

Edmonton

Saddle 1/2 FPT for 1 in. PVC (25-Pack)

Prices start at : 47.98 USD / bag

This saddle is ideal for both contractors and DIY. The Blazing Saddle 1/2 FPT is for use with 1 in. PVC irrigation piping. Simply clamp, push down, twist, and you are done. The easiest way to a secure fit without any tools.

✓ Model number and size molded into saddle
✓ More comfortable handles
✓ Made of high impact ABS
✓ Optimal sprinkler head flow, delivers more than 7 GPM at 40 psi and 12 GPM at 60 psi

Irrigation Tool Type: Pipe Saddle
Outer Diameter (in.): 1.315

Alberta

Edmonton

Blue Stripe 1/2 in. Drip Riser-Adapter (2 Pack)

★★★★★

Prices start at : 3.61 USD / each

Riser Adapter Tees (2-Pack) offer a fit that resists leakage. Designed to join 2 lengths of Blue Stripe Drip 1/2 in. Hose, the Toro Blue Stripe Drip 1/2 in. Use to retrofit an existing irrigation system from a 1/2 in.

✓ Leak-resistant fit
✓ Use to retrofit an existing irrigation system from a 1/2 in. riser

Outer Diameter (in.): .7
Product Length (in.): 2
Fitting Type: Compression Fittings,Universal Fittings
Drip Irrigation Fitting Type: Adapter

Alberta

Edmonton

1/4 in. Barb Elbows (10-Pack)

★★★★★

Prices start at : 1.96 USD / each

Micro tubing, soaker hose or drip-line around sharp corners. The DIG 1/4 in. Barbed Elbow is used to provide a secure connection of two pieces of 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit.

✓ Inserts easily into 1/2 in. poly tubing and 1/4 in. micro tubing for a watertight fit
✓ Made from durable, high-quality material

Product Length (in.): .63 in
Product Width (in.): .4 in
Package Quantity: 10
Manufacturer Warranty: 3 Year Warranty

Alberta

Edmonton

Gro Garden Sprayer Kit

★★★★★

Prices start at : 51.00 USD / each

In just 3 simple steps you can save time, water and backache with hands-free, precision watering all season long. The Gro Garden Sprayer Kit is an easy-to-use system for precision watering with an elegant, discreet, flexible footprint that allows you...

✓ Water multiple plants at the same time
✓ Quick connect technology to easily attach (and detach) from any outdoor spigot
✓ Delivers water where plants need it

Manufacturer Warranty: Satisfaction Guaranteed or your money back. If you are not satisfied, return the product and all pieces to Scotts Miracle-Gro Products, Inc. P.O. Box 606, Marysville, OH 43040 Limit: One product per family
Irrigation System Component: Kit
Included: Garden Hose Connection,Tubing,Tubing Clips

Alberta

Edmonton

30 psi Pipe Threaded Pressure Regulator

★★★★★

Prices start at : 12.98 USD / each

Utilizing few moving parts, the pressure regulator's sophisticated diaphragm design regulates itself in reaction to the overall system back pressure to provide consistent output pressure within the specified flow range.

✓ Flow rate from 0.5 to 12 GPM
✓ Exceptional control of outlet pressure provides consistent performance over wide range of pressures
✓ Inlet and outlet thread: 3/4 in. FNPT x MNPT

Inlet Diameter (in.): 0.75
Irrigation System Component: Accessory
Maximum Regulated Pressure (psi): 30

Alberta

Edmonton

14 in. Watering Stake

★★★★★

Prices start at : 8.67 USD / each

The stakes also allow you to aerate and fertilize the roots and soil of your trees and plants. They help conserve up to 50% of your outdoor water use by avoiding water loss, due to evaporation and run-off.

✓ 14 in. watering stake is great for potted plants, shrubs, vines, and small trees
✓ Weed control
✓ Deep watering promotes deeper roots

Product Depth (in.): 1
Irrigation System Component: Stakes
Manufacturer Warranty: Manufacturer Warranty is valid for 1-year. Stake will be replaced at no charge with proof of purchase in case of a manufacturer defect or breakage/splintering during installation.

Alberta

Edmonton