Drip Irrigation Fittings Drip Irrigation For Sale In Calgary

Great for use in conjunction with your in-ground irrigation system. (PVC side will require glue for connection). Poly tubing to 1/2 in. DIG's D48 makes it simple to connect a 1/2 in.

Provides a split direction from your drip head assembly. Compression fitting provides a secure, water tight fit without the use of glue. The DIG Hose Thread Swivel Tee is designed to attached your drip irrigation system to a hose thread outlet.

Designed to connect hoses. These non-threaded couplings deliver an easy fit for quick installation. Set up your sprinkler and irrigation system with these Easy Fit Couplings (2-Pack).

Our line-up of fittings offer a faster, more convenient way to make more drip connections in a lot less time. Not only will it help maintain a healthy beautiful landscape which you can enjoy with your friends and family, but its most convenient and efficient...

Pipe Thread Adapter can help adapt your sprinkler risers into water-efficient low-volume irrigation systems. Accommodates most all threaded emitters. Connect the male pipe thread with semi-rigid riser into the FNPT and thread or insert the micro sprinkler,...

Easily connect 1/2 in. Poly tubing and create a strong, water tight seal without the use of glues or special tools. Made from durable, UV resistant materials for long life in the landscape.

This line of Clampless fittings require no tools or extra fittings to install. FPT Insert Elbow is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings...

Tees (4-Pack) help you branch a line of tubing in 2 directions. They are designed to provide reliable installation but can be removed if needed. The Toro Blue Stripe Drip 1/2 in.

Irrigation tubes together. Also, barb connections are featured on each end. Drip Coupling is used to connect two 1/4 in. The Toro Blue Stripe 3/4 in. This coupling has a pressure rating of 161.

The DIG 1/4 in. Barb Connector is used to provide a secure connection of two pieces of 1/4 in. Each connection offers raised barbed ends to ensure a strong, water tight fit. Micro tubing, soaker hose or drip-line.

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Tee works with the most common sizes of 1/2 in.

Installing the micro tubing into the compression fitting provides a secure, water tight fit without the need for glue. Compression Fitting enables the connection of micro tubing to any 3/4 in.

Tee as a hose fitting in your sprinkler and irrigation system. Connection size. The tee has a 1/2 in. Also has 3 openings. Use the Easy Fit 1/2 in.

Female Hose Thread x 1/2 in. The DIG 3/4 in. Compression fitting provides a secure, water-tight fit. Garden hose or hose thread to 1/2 in. Easily installed without the use of special tools or glues.

This adapter provides simple connection of a drip system to a 3/4 in. Compression fittings provide quick, leak-tight connection. Drip irrigation tubing. Compatible with all brands of 1/2 in.

This line of Clampless fittings require no tools or extra fittings to install. X Swing Pipe Barb Tee is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings...

This elbow changes the water's direction 90 degrees and features two 1/2 in. Each connection offers dual barbed ends to ensure a strong, water tight fit. Barbed Tubing Elbow. Route water in drip and micro irrigation systems with the DIG Corp.

This line of Clampless fittings require no tools or extra fittings to install. Insert Tee is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on...

Of vinyl tubing, 10 pressure compensating drippers, 10 barbed tees, 3 barbed crosses, 10 white nail clamps, 1 faucet adapter, 10 support stakes, and 1 back flow prevention valve. If you have multiple containers, additional drippers can allow this system...

FPT Tee is the easiest way to connect Polyethylene pipe for irrigation systems. Made of high-impact ABS, the Blazing Fast Fittings are the most eco-friendly fittings on the market.

Easily connect to a 3/4 in. Compression fittings are a simple and secure way to assemble your drip irrigation system. Poly tubing compression fitting. Pipe thread connector by 1/2 in.

It is fully adjustable from off to 2 GPM and a 0 to 2-ft. The Toro flood bubbler can be mounted on a 1/2-in. NPT riser for non-traffic areas. The Toro Flood Bubbler has a full circle pattern for slow, deep watering around trees, shrubs, and vegetable...

Slow application of water means less runoff and increased soil absorption. Comes assembled comes with a adjustable spray jet, a 13 in. Micro tubing with barb. The DIG 180° Adjustable Spray Jet offers a low-volume, water saving solution to water, trees...

It features a unique release tab that allows for removal and reinsertion of tubing for convenient installation and maintenance. This easy-to-push-on Coupling works with the most common sizes of 1/2 in.

The Orbit 1/4 in. Barb Assortment Pack contains four different barbed drip fittings. To be used outdoors with cold water only. These fittings are made of durable plastic that will ensure many years of reliable use.

Would you like to control the water flow to plants or shrubs in your Micro Drip, now you can will the Barbed Shut-off Valve. Simply connect the Barbed Valve into any type if 1/4 in.

Or add a hose-end timer (purchased separately) for automated watering. Easy to assemble - just attach to faucet, cut tubing with scissors, connect and place the staked watering devices.