Conveyors Aggregate Mining Equipment For Sale In Rhode Island

B) Self-cleaning sloping grizzly with nominal 6” spacing to remove oversize material; grizzly bars constructed of 1” x 5” flat bar; framework constructed of square tubing with steel plate and reinforcing ribs; grizzly bars manually tip.

2011 Superior 48RZTU Conveyor / Stacker for sale, Superior 48” RazertTailtm Truck Unloader -Grate 10' x 5' -Hydraulic self-cleaning ramps -Ramp Bulkhead with hyd raise and lower -Single axle -Brakes, Lights, Mud flaps -Crank down landing jacks -15 hp...

Rock Systems Model 111-ED Heavy Duty End Dump Truck Unloader Rock Systems heavy duty end dump truck unloader complete with 50 ton capacity feed hopper constructed of 3/4” thick steel plate with reinforcing, rock box style construction to reduce wear;...

F) CEMA “C” troughing idlers 35 degree with 5” diameter rolls mounted on 4' centers; CEMA “C” troughing idlers 20 degree with 5” diameter rolls mounted on close centers at the load point; CEMA “C” return idlers with 5” diameter rolls...

Rock Systems 36” wide x 100' long portable radial stockpiling conveyor with 40 h.p. electric motor, Dodge TXT6 shaft mount speed reducer with internal backstop, v-belt drive and OSHA drive guard; Dodge 18” diameter rubber lagged head pulley; Dodge...

Rock Systems 36” wide x 80' long portable radial stockpiling conveyor with 25 h.p. electric motor, Dodge TA4207H15 shaft mount speed reducer with internal backstop, v-belt drive and drive guard; 18” diameter drum pulley; 16” diameter self-cleaning...

7'-8" wide x 13' long hopper opening with 13.5 cubic yards struck storage capacity; hopper constructed from 1/4” thick steel plate with square tube reinforcing at the hopper top and angle iron reinforcing at the hopper mid-section and bottom section;...

2013 McCloskey 36x80 Conveyor / Stacker for sale, McCloskey 36x80 Portable Radial Stacking Conveyor Self Contained Diesel • 30” Truss Frame • Kubota Diesel Engine • Hydraulic Drive • 3 Ply Belt • CEMA B Idlers • Breaks, Lights, Mud flaps...

D) One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat safety yellow paint for all guarding. B) 48” wide discharge conveyor complete with Weg 50 h.p. electric motor, Dodge TAII6307H25 shaft mount reducer with...

ThorLoPro Model LPT150x36-8, 36" wide x 150' long telescopic portable radial stacker capable of 800 tons per hour production and telescopes from 96'-0" to 150' complete with 40 h.p. electric motor drive on the outer conveyor; twin 10 h.p. electric motor...

Rock Systems 36” wide x 80' long self-contained portable radial stockpiling conveyor with 18” diameter drum pulley; 16” diameter self-cleaning tail pulley; 20” rubber lagged drive pulley; 16” self-cleaning bend pulley; screw take-up assemblies;...

New Pit Portable 36"x100'' Radial Stacking Conveyor • Discharge Height: 31' High (18°) - 4 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x 1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Wrap Type mid drive • Lagged head Pulley:...

New Pit Portable 36"x60'' Radial Stacking Conveyor • Discharge Height: 19' High (18°) - 2 Adjustments • 24" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 6" Pipe Axle, 8-Bolt 16" Tires & Wheels • Lagged head Pulley: 14" Diameter, 2 7/16" Shaft...

Simplicity 3' X 8' Vibrating Grizzly Feeder Simplicity 36" X 8' Vibrating Grizzly Feeder - Nice little VGF for small plant.

New GCS Pit Portable 48"x60'' Radial Stacking Conveyor • Discharge Height: 19' High (18°) - 2 Adjustments • 24" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 6" Pipe Axel, 8-Bolt 16" Tires & Wheels • Lagged head Pulley: 14" Diameter, 2 15/16"...

40' AND 50' RADIAL STACKER/CONVEYORS AVAILABLE. CALL FOR MORE INFORMATION.

Drive, nip, pinch-rail, tail pulley guards. CEMA "C" troughing and return rollers. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster bearings.

New GCS- Pit Portable 24"x80' Radial Stacking Conveyor • Discharge Height: 25' High (18°) - 2 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Lagged Head Pulley: 14" Diameter, 2 7/16"...

• 15 or 20 HP electric motor drive with Leroy Somers 207 shaft mounted speed reducer. • Belt speed approximately 320 FPM. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

80' Diesel powered radial conveyor New and ex rental units available.

30 CUBIC YARD FEED HOPPER 42"X25' BELT FEEDER, 15HP WEG SEVERE DUTY MOTOR, 5"X46" FLAT ROLLERS ON 10" CENTERSVERY GOOD CONDITION, USED ONLY FOR COAL FINES, HEAVY DUTY SKID BASE, HOPPER DUMP OPENING 48"X90"X192", LOWER FEED OPENING 32"X171", DISASSEMBLED...

2012 USED McCLOSKEY 36X80 STACKER (TRACKED) SN: 80792-Stackers are all about efficiency, from its speedy setup time to its high degree of mobility, downtime is minimized while throughput and stockpile capacity are maximized.

Rock Systems Front End Loader Hopper with Belt Feeder, Model 101-30 complete as follows: a) 12' wide hopper opening with 15 ton storage capacity (based on 100 lbs/cu. Material); b) Hopper constructed of 1/4” thick steel plate with reinforcing and 5...

UNDERCARRIAGE - manual telescoping pin lock; axle - single axle with single 11:00 x 22.5 tires on swivel wheel boxes - collapsible type undercarriage HEAD PULLEY - rubber lagged pulley TAIL PULLEY - wing type self-cleaning DRIVE ASSEMBLY - 15 HP with...

Stacking Conveyer For Rent or Sale Please call for more information

F) Conveyor troughing idlers, CEMA “C”, 35o deep trough, with 5” diameter rolls mounted on 4’ centers; troughing idlers CEMA “C”, 20o deep trough, with 5” diameter rolls mounted on close centers at load point; return idlers CEMA “C” with 5”...

• Travel dimensions: 9'5" wide x 63' long x ' high. • 35° x 5" dia. CEMA "C" troughing and return rollers. • 16" Self-cleaning flat bar tail pulley with 2 7/16" diameter tail shaft and adjustable 44" take-ups.