Conveyor Feeder Stacker Aggregate Equipment For Sale In Jacksonville

• Travel dimensions: 9'5" wide x 63' long x ' high. 6' receiving hopper with 6" rubber flashing. • 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer. • Belt speed approximately 320 FPM.

Specifications: Portable straight axle undercarraige. CEMA "C" troughing and return rollers. 16" Lagged directional head pulley with 2 3/16" diameter head shaft. Drive, nip, pinch-rail, tail pulley guards.

• Dimensions: 10' wide x 12'0" long x 10' high. • F.O.B.: Phoenix, AZ • PRICE: $8,250 10' x 12' feed hopper with manual slide gate Specifications: • 11.5 CY capacity.

• Loading area idlers - CEMA C, ICC, 5" dia. Crown faced, wing type pulley • Shafts – C1045 turned and polished, Bearings – Pillow block bearings • Take ups - Screw type • Belting - 2-ply 3/16 x 1/16 220 PIW, Belt splice - Flexco mechanical steel...

Has 5 HP motor and hand crank on the raise and lower. Has head and tail pulley and reducer.. Barber Greene portable channel conveyor stacker with tires. Has small feed hopper, drive motor at mid conveyor.

(2) Heavy duty oversize rock cute (one out of each side). The front discharge chute folds up so that the truck can fit under for transport. Trio portable Rip Rap Plant. Trio 52"x24' Vibrating feeder with (2) 5' Grizzly sections and adjustable grizzly...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

ROLLS, SEALED FOR LIFE BALL BEARINGS - LOAD AREA: 20° TROUGH, 12-16" SPACING - TROUGH: 35° ON 4' SPACING - RETURNS: STEEL ROLLS, ON 10' SPACING - IMPACTS IN HOPPER - 42" ROCK BOX HOPPER - GATHERING TROUGH: 5' LONG WITH ADJUSTABLE RUBBER FLASHING ADDITIONAL...

Includes fixed speed electric motor controls and wiring. Heavy Duty Barge/Ship Loading System Rock Systems heavy duty barge/ship loading system complete with heavy duty feed hopper constructed of 1" thick steel plate with reinforcing; 46" wide x 20’...

CEMA "C" troughing and return rollers. 10" deep channel frame construction. 6' receiving hopper with 6" rubber flashing. 13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable...

Trio 52"x24' VGF with 6' Grizzly bed @ 5" spacing, and 6' Grizzly bed @ 9" spacing. Includes 3 discharge chutes, electrical switchgear, electric motor, and SO cord to connect to on-board switch-gear.

Excellent Condition Has 50 ton hopper can load out up to 2100 ton per hour Loads approximately 710 ton per hour sand and gravel at 8 feet per minute with 20 hp motor at 13 amps 180 to 1 dodge box with hopper Approximately 100,000 pounds

Electric and dual power are also available to get the job done, no matter what application. The 22.5 degree maximum conveyor angle allows for the highest stockpiles per conveyor length in the industry.

• Heavy Duty Undercarriage, 8x8 Tubing Axle, 16” Tires & Rims • Lagged head 16” Dia., 2 7/16” Shaft & Ball Bearing • Winged Tail, 2 7/16” Shaft & Ball Bearings w/Screw Take-ups • World Wide #4 Drive, Motor Mount, Belt Guard • 10 hp, TEFC, 1800...

Electric engine 30'' X 33' strap.

Designed for transferring material to back of trench as pipe is being laid. Works extremely well in sandy soils where material dug out can be used in backfill, very good condition Trench backfill conveyor - 48" x 72', 12 yard hopper, 61,000 lbs, repowered...

Rock Systems Model 501-3660 - 36” x 60’ Stackable Conveyor Rock Systems 36” wide x 60’ long Stackable Conveyor, Model 501-3660, complete as follows: a) Head terminal includes Weg 15 h.p. TEFC electric motor; Dodge TXT4 shaft mount speed reducer with...

ROLLS, SEALED FOR LIFE BALL BEARINGS - LOAD AREA: 20 DEGREE TROUGH, 12-16" SPACING - TROUGH: 35 DEGREE ON 4' SPACING - RETURNS: STEEL ROLLS, ON 10' SPACING - RADIAL HOPPER: SLOPED, 5' LONG, BOLT ON DESIGN - GATHERING TROUGH: 5' LONG WITH ADJUSTABLE RUBBER...

Including 42”x8’ Belt Feeder w/wing tail, herringbone lagged head & drive pulley, 5” diameter, flat roll idlers mounted on 7” centers, Dodge 4 reducer, jackshaft and final sprocket & chain drive.

9'-6" by 9'-6" Wide Top Opening with Adjustable Slide Gate to Control Material Flow. KPI 13-3080 Self-Contained Portable Stacking Conveyor 30" Deep Lattice Undercarriage - Telescoping Hydraulic Lift with High Flotation Super Single Tires 18.00x 22.5 Capacity...

30" x 80' Truss Frame w/Radial Stacking Carrier

SHAPE, WORKING DAILY CEDAR RAPIDS 24" X 60' RADIAL STACKER, 24" BELT, EXCELLENT SHAPE. 24 x 60 RADIAL STACKER, EXC. CALL FOR MORE INFORMATION.

Large capacity truck unloader Radial stokpiling Conveyor Full remote control Tracked truck unloader.

Other Sizes also IN STOCK: 38X12, 46X16, 52X20 *NEW* GATOR 3816 VGF *NEW* GATOR 3816 Vibrating Grizzly Feeder- 38" x 16' heavy duty vibratory feeder w/6' adjustable grizzly bars, bolt-on manganese side and pan liners, standard "off the shelf" oil bath...

Belt feed hopper Control panel with VFD Hyd tipping grid Heavy duty belt scraper

CEMA "C" troughing and return rollers. 10" deep channel frame construction. 6' receiving hopper with 6" rubber flashing. 13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable...