Conveyor Feeder Stacker Aggregate Equipment For Sale In Idaho

Not sure of the make and model but the runs runs out good. Trailer is not included. Looks to measure out at around 1000 gallons.

• Belt speed approximately 320 FPM. • 2 guide rolls on the return belt side at the tail end of the conveyor. 6' receiving hopper with 6" rubber flashing. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

Superior 48” RazertTail™ Truck Unloader -Grate 10’ x 5’ -Hydraulic self-cleaning ramps -Ramp Bulkhead with hyd raise and lower -Single axle -Brakes, Lights, Mud flaps -Crank down landing jacks -15 hp electric pumping unit -Adjustable flow gate -Electrical...

Belt feeder with hydraulic dump grizzly, 36" feed conveyor.

50' CONVEYOR WITH HYDRAULICS FOR POWER PLANT OR HOOK TO SCREEN, GOOD BELT, SINGLE AXLE, NEEDS A LITTLE MAINTENANCE, WORKS FINE

RIM AND TIRE - PINTLY TYPE HITCH - 3 PLY 3/16" X 1/16" 330 PIW BELTING - VULCANIZED BELT SPLICE - SUPERIOR CEMA C TROUGHING AND RETURN ROLLERS - SUPERIOR 14" LAGGED HEAD PULLEY - SUPERIOR 12" WINGED TAIL PULLEY - GUARDING FOR DRIVE AND TAIL PULLEYS, V-BELT...

CALL FOR FREE FREIGHT QUOTE 36" X 60' HYDRAULIC STACKABLE CONVEYOR.

Rock Systems Model 108-6S Stationary Bin Blending Hopper Rock Systems stationary 6 bin blending hopper complete with 9’-6” wide x 14’ long bins with 20 ton storage capacity each; 30” wide roller belt feeders with 5 h.p. fixed speed electric motor...

18" X 45' Conveyor Hopper 7'x8' Ramsey Microtech 2000 Scale Eriez Magnetic Separator s/n-T009730, Style- 18x48, Model- HVF-18 Max V Belt Cleaning System Fully Shielded Conveyor 275/70Rx22.5 Tires At 95 % Good 7.5 HP Motor 575 Volt Conveyor Electric Drive...

E) Conveyor belting, 3 ply, with 3/16” top rubber cover and 1/16” bottom rubber cover, 330# working tension, Flexco 140 mechanical belt splice. I) Single wheels with spindles and 425/65R-22.5/20 high flotation pneumatic tires.

Rock Systems Model 111-ED Heavy Duty End Dump Truck Unloader Rock Systems heavy duty end dump truck unloader complete with 50 ton capacity feed hopper constructed of 3/4” thick steel plate with reinforcing, rock box style construction to reduce wear;...

Excellent Condition Has 50 ton hopper can load out up to 2100 ton per hour Loads approximately 710 ton per hour sand and gravel at 8 feet per minute with 20 hp motor at 13 amps 180 to 1 dodge box with hopper Approximately 100,000 pounds

New GCS- Pit Portable 24"x80' Radial Stacking Conveyor • Discharge Height: 25' High (18°) - 2 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Lagged Head Pulley: 14" Diameter, 2 7/16"...

36" Wide x 60' Long Radial Stacker Rock Systems 36” wide x 60’ long radial stockpiling conveyor complete with Weg 15 h.p. electric motor, v-belt drive with OSHA drive guard, Dodge TXT4 shaft mount reducer with internal backstop, Dodge 14” diameter...

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster...

GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED. SUPERIOR 42" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 30" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS:...

Mechanism is enclosed in a dustproof housing. Vibrating mechanism is a model LLH-26 with two full-length, self-counterweighted solid steel shafts, Helical gears, Four (4) 130 mm spherical roller bearings and Oil splash lubrication system.

F.O.B.: Phoenix, AZ PRICE: $13,200 Belt speed approximately 320 FPM. 6' receiving hopper with 6" rubber flashing. 2-ply belting with 3/16"x1/16" covers. 13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster...

10' wide, 2' deep hopper. Hydraulic requires 38GPM @2500psi. 37'9" length, 5'1" width, 11,000 weight. 14" drive pulley, 7" tail pulley. Dump Truck Unloader 25HP 3-phase electric motor, 240v.

The 'V-Bin' section itself is now fully hydraulically folding and boasts a standard capacity of 7 cubic yards (larger bins available on request). In order to deal with shock loads of 10 tons and more the Direct Load Stacker uses a very heavy duty build...

36"x60' Lattice frame mine duty conveyor with 20hp motor, Dodge gear box, lagged head pulley, winged self cleaning tail pulley, and adjustable receiving hopper. Goodfellow 36"x60' HD Lattice Frame Stackable Conveyor S/N - 3660S13364 New.

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster...

• Heavy Duty Undercarriage, 8x8 Tubing Axle, 20” Tires & Rims (USED) • Lagged head 16” Dia., 2 15/16” Shaft & Ball Bearing • Winged Tail, 2 15/16” Shaft & Ball Bearings w/Screw Take-ups • World Wide #5 Drive, Motor Mount, Belt Guard • 20 hp,...

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster...