Conveyor Feeder Stacker Aggregate Equipment For Sale In Denver

Sheaves, belts, and pivoted motor base. TWO(2) AVAILABLE. Mechanism is enclosed in a dustproof housing. LIPPMANN-Milwaukee Heavy-Duty Horizontal Vibrating Pan Feeder, 6’ x 16' long, with 1 1/4" thick steel feeder pan, 16' feet long, 1/2" thick AR steel...

Radial Stacking Conveyor, 20 HP electric motor, v-belt drive, 6’ hopper.

• 2 guide rolls on the return belt side at the tail end of the conveyor. 6' receiving hopper with 6" rubber flashing. • 15 or 20 HP electric motor drive with Leroy Somers 207 shaft mounted speed reducer.

80' Diesel powered radial conveyor New and ex rental units available.

Belt speed approximately 300 FPM. 13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 2 3/16" diameter head shaft,...

36" x 60' XHD Channel Frame

50' CONVEYOR WITH HYDRAULICS FOR POWER PLANT OR HOOK TO SCREEN, GOOD BELT, SINGLE AXLE, NEEDS A LITTLE MAINTENANCE, WORKS FINE

Mounted on Goodfellow portable chassis with 2 axles, air brakes and tail lights. Includes 3 discharge chutes, electrical switchgear, electric motor, and SO cord to connect to on-board switch-gear.

Eriez Model 42 [42" X 72"] Electro-mechanical Feeder. Capacity up to 1,100 TPH.

PLEASE CALL FOR MORE INFORMATION. VARIOUS SIZES AND MAKES OF CONVEYORS. 24", 30" 36" WIDE, 60' -120' LONG.

Goodfellow 36"x60' HD Lattice Frame Stackable Conveyor S/N - 3660S13364 New. 36"x60' Lattice frame mine duty conveyor with 20hp motor, Dodge gear box, lagged head pulley, winged self cleaning tail pulley, and adjustable receiving hopper.

Rock Systems Model 501-3060 - 30” x 60’ Stackable Conveyor Rock Systems 30” wide x 60’ long Stackable Conveyor, Model 501-3060, complete as follows: a) Head terminal includes Weg 15 h.p. TEFC electric motor; Dodge TXT4 shaft mount speed reducer with...

Electric power (includes box). Will sell individual pieces. Also another 42"x6' apron feeder for the fines underneath. 5X14 3 Step-deck Rip Rap screen consisting of (1) 5'x6' section with nominal 5" grizzly bars (2) 5'x4' sections with 10" nominal grizzly...

Belt speed approximately 300 FPM. 13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft,...

18 Cubic Yard Heavy Duty Feeder. 36x46, Adjustable Grizzly Bars

Electric and dual power are available as options based on the best application for the customer's business. The McCloskey 36 x 80 Stacker has been designed for high capacity stockpiling operations.

*NEW* GATOR 3816 VGF *NEW* GATOR 3816 Vibrating Grizzly Feeder- 38" x 16' heavy duty vibratory feeder w/6' adjustable grizzly bars, bolt-on manganese side and pan liners, standard "off the shelf" oil bath lubricated bearings, adjustable timing gears,...

Rock Systems Model 104-A Drive-Over Unloader Rock Systems drive-over unloader, model 104-A, complete with truck dump 8’-8” long x 10’ wide x 8’-10” tall; hopper with adjustable skirtboards, pipe grizzly and wheel runways; 42” wide discharge conveyor...

NEW KOLBERG SERIES 47 30" x 60' STACKABLE CONVEYOR WITH COLLAPSIBLE UNDERCARRIAGE identical to the three shown in pictures to include:. Stake pockets Anchor Pivot- for radial travel Option: Oversize receiving hopper available for additional $1,200

AES 36" X 20' CHANNEL FRAME SAND REJECT CONVEYOR EQUIPPED AS: - FLAT ROLLERS, DESIGNED TO SLIDE IN UNDER BOTTOM DECK OF 6 X 20 SCREEN PLANT - RIGHT HAND DRIVE - 3 HP DRIVE - VULCANIZED SPLICE - FULL LENGTH SKIRTING - GUARDING - WE DO NOT WARRANT THAT...

(Less required electric motor). Skid mounted Feed Hopper, 8’x16’ top, 13’3” overall height, swig gate discharge, bin vibrator with 8’x11’3” skid base of 8” wide flange. Including 42”x8’ Belt Feeder w/wing tail, herringbone lagged head & drive...

Rock Systems Low Profile Railcar Unloader. D) One rust inhibitor prime coat and one finish coat gray paint for all equipment; one finish coat safety yellow paint for all guarding. E) Electric motor control panel complete with 3 phase NEMA rated contactor...

• 16" Lagged directional head pulley with 2 3/16" diameter head shaft. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles. 6' receiving hopper with 6" rubber flashing.

Trio portable Rip Rap Plant. Telescoping front support legs. Hoppers made from 3/4" plate with heavy duty stiffeners and supports. Trio Portable Rip Rap Plant New. The front discharge chute folds up so that the truck can fit under for transport.

GUARDS MAY NOT MEET ALL LOCAL CODES, CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED SUPERIOR 30" X 70' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: CONVEYOR FRAME: - MAIN FRAME: 24" DEEP TRUSS - CHORD ANGLES: 3" X 3" X 1/4" - LATTICE MEMBERS:...

SUPERIOR 36" X 30' CHANNEL FRAME CONVEYOR EQUIPPED WITH: - 8" STRUCTURAL CHANNEL - 3-PLY 3/16 X 1/16 330 PIW BELTING - VULCANIZE BELT SPLICE - CEMA B IDLERS (4 BOLTS PER IDLER) - MEDIUM DUTY BEARINGS - SCREW TYPE TELESCOPING TUBE TAKE-UPS - 2' HEAD SUPPORT...

AES 48" X 30' SCALE CONVEYOR EQUIPPED AS BELOW: - 3" X 5" ANGLE LATTICE FRAME - 20 HP 1800 RPM T FRAME WEG MOTOR - FALK SHAFT MOUNTED GEAR REDUCER - DODGE BEARINGS - AES TELESCOPING TUBE STYLE TAKE UP LEGS - MANUAL RAISE TUBE STYLE UNDERCARRIAGE WITH...