Construction Equipment Vertical For Sale In Boston

RD4030-RB6,Rolling baskets, drag harrows

30 Ft, 8", 21" Front, Cushion Gang, 21 1/2" Rear Blade, Hyd Fore Aft, 8 Bolt Walkers, 12.5Lx15, 6 Bolt Walkers on Wings, 11Lx15, Wing Gauge Wheels, Rolling Basket w/ Hyd Lift

250 CU FT VERTICAL MIXER / DUAL CROSS CONVEYOR/ EZ2400V DIGISTAR SCALE CONTROL EXCELLENT CONDITION

VERY NICE--LOW ACRES!

26 FT LANDOLL VERTICAL HARROW • AGED UNIT/SOLD W/NEW WARRANTY • Never Been Used /Freight Quoting and Financing Available!

Drifter Only* Surplus HL300 Drifter* Very Good Used HL300 Drifter from Commando 300 Rock Drill*

DTH Class* Drills Holes 4" to 24" in Diameter* Able to Drill Holes Vertically, Horizontally, and Every Angle in Between* Has a Hydraulic table for up to 9" opening IR-360 DTH Hammer w/ Bits 8.5" and 7.5" IR-350 DTH Hammer w/ Bit 6.25" Drill King 4" DTH...

5 Shank, Auto Reset, 3/4" No till winged point

Capacity, 3-speed automatic shifttronic transmission, front conveyor and Digi-Star scale system with TMR Tracker, Lease Options available 2014 Trioliet 3200-VLK-K-T, twin screw feed-mixer -1150 cu.ft.

NEW 32 Foot, 9" Spacing, Heavy Duty Scrapers, T2-215 Bearings, Manual Leveling, Rolling Baskets, Hydraulic Option Available for On-The-Go Gang Angle

(86) 7" INCH STEEL PIPE'S PARTS NUMBER 57708398 & 57708372 TO FIT ON DMM2, DMH, DM45E, DM50E, T4W, RD10, RD20 WE HAVE QTY OF 31PIECES PART No. 57708398 OF 7" INCH 30FT LONG AND QTY OF 55 PIECES OF 25FT PART No. 57708372 ROD STEEL PIPE'S 4-1/2 BECO TO...

A 2623VT with 22" disk and rolling harrow. Can be seen in Prague or call 405-567-2205. 26'5" working width.

This is a Terex Texoma 330-12 pressure digger mounted on a 1997 International with a 12' digging depth. The Funk transmission and shuttle were rebuilt about a few months ago and the starter and ring gear are new.

Wing Fold, Rear Reel, Smooth Discs, w/ Gauge Wheels

CAT diesel engine.

New Landoll 7431 VT's, 26',29', &33' available, Please Call!!!

42' 330 TURBO TILL - VT, ROLLING BASKET - FLAT BAR, F/A TILT, BLADES 19.5", FRT & REAR WAVY BLADES, SINGLE PT, GAUGE WHEELS, NICE CONDITION. Other websites show the location as Assumption, IL or Monroe, WI, while it may be at any of Sloan's 20 stores.

2.5 - 3.5 Inch Class* HD712 Drifter w/ 4,843 Percussion Hours* New Engine January 2010 w/ 6,890 Hours* Drifter redone each winter 10,453 Total Frame Hours

HAS 38'FT 9" MAST HAS 5 1/2" CENTER DIAMETER AND 11" OUTSIDE DIAMETER WORKING TABLE THIS DRILL IS MOUNTED ON 1991 MOUNTED ON 1991 Hendrickson VT-100 T/A Truck , Cummins N14-330 Engine On Carrier 230 Rated Horsepower, Engine Brake, Eaton Fuller 8 Speed...

4 point scales. Penta 4130 w/3/4" Hurricane Auger, AR200 1/4" side walls and Dual discharge from either side. Used for demo and occasional rental.

2017 Patz 420 Mixer, Digital Scale, Incline Discharge Call For Price (Q)

Horsepower: 0, Hours: 0

XJ450 DRILLING RIG WITH DRILLING COMPONENTS

1998 INGERSOLL-RAND DM45E SERIAL NUMBER 7483 BLASTHOLE DRIILL CUMMINS N14-C DIESEL ENGINE, HYDRAULIC DRIVE, XL900 CFM 150PSI AIR COMPRESSORE, 40FT MAST WITH 5- STEEL CAROUSEL WITH 5” INCH DRILL STEEL, DUST COLLETOR, ENCLOSED AIR CONDITIONED CAB, 24 INCH...

Drifter Only* New Unused YH135 Drifter* Comes with Charging Kit & Tool Kit*

2.5 - 3.5 Inch Class* TOYO TH800C Hydraulic Drifter* Powered By DEUTZ BF6L913 Diesel Engine* Extendable Boom Onboard Sullivan air compressor - 160 CFM @ 150 PSI Dry Dust Collector Miscellaneous TCD918E.pdf

15', HD scrapers, Serrated self sharpening discs, Available for rent!