Construction Equipment Scrap Processing Demolition Equipment For Sale In East Syracuse

30" CP HD BUCKET FOR A JOHN DEERE 130/135, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth, Width: 30"

LABOUNTY HDR100S, HDR100209, GRAPPLE ATTACHMENT, SK480 MOUNTING, 52" WIDE, MANUAL POWERED, 2/3 TINE, # 71314

30" TAG HD BUCKET WITH (5) TK225FD TEETH FOR A JOHN DEERE 75/85, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth TAG 75/85

60" CP DITCHING BUCKET WITH BOCE FOR A JOHN DEERE 160, Fits On (machine Category): Excavators, Gets: Cutting Edge, Width: 60"

SS 42" FORKS & FRAME 3750#

GEITH HD40-036, 239622, 36" WIDTH, DIGGING BUCKET, .71 YD YD CAPACITY, 130LX MOUNTING, 65MM PINS, 255MM DIPPER WIDTH, SIDE CUTTERS

LABOUNTY LMB5545 HYDRAULIC BREAKER, AUTOLUBE SYSTEM, MOUNTING BRACKET FOR KOBELCO SK350

2016 FECON BH74SS SKID STEER BULLHOG

3 CuYd GP PIN ON BUCKET WITH BOCE FOR A JOHN DEERE 544, Fits On (machine Category): Wheeled Excavators, Connection: Pin On, Gets: Cutting Edge, Capacity: 3, Bucket: General Purpose

LABOUNTY HDR70S, 70706, 2/3 HDR GRAPPLE ATTACHMENT, SK350LC KOBELCO MOUNTING, 32" LOWER/48" UPPER JAWS WIDE, MECHANICAL POWERED

LBS IMPACT, 320-600 BPM, # 78253 Pin Diameter: 90MM Stick Width: 326MM 2013 KENT F35QT, F35 31134, SK260 INITIAL MOUNTING, 6000 FT.

2015 MAGNUM RHB 306-6 HAMMER, Fits On (machine Category): Backhoe Loaders, Compact Excavators, Excavators

Recommended Carrier Weight: 10,000lbs.-19,800lbs Excavator & Loader Backhoe Fits: 50MM Pins and Stick Width: 182MM Impact Energy Class: 1,600 ft. Frequency: 500-1,700 bpm Hydraulic Flow Requirement: 13-40 gpm Hydraulic Pressure: 1,450-2,050 Single body...

GEITH HD30-018, 206897, 18" WIDTH, DIGGING BUCKET, SK35 MOUNTING, 40MM PINS, 141MM DIPPER WIDTH, 4 TEETH

2014 KENT/FRD/FURUKAWA HYDRAULIC HAMMER, MODEL: FX475QTV, MOIL POINT, CARRIER RANGE: 39-61 (US TONS), OIL PRESSURE 2,320-2,610 PSI, REQUIRED OIL FLOW 53-79 GPM'S, IMPACT ENERGY CLASS: 8,500 FT.

It has a 12000 pound capacity and hooks up with just a shackle. The KL12000 Barrier Lift has a 6 to 12 inch grip range to handle 16 – 20 foot lengths of jersey wall easily. The scissor action allows the operator to unload wall directly from the truck...

HELAC POWER TILT COUPLER TT10-M63326-210 FOR A JOHN DEERE 595D, Coupler Mfr: HELAC, Fits On (machine Category): Wheeled Excavators, Drive: Hydraulic

48" TAG HD BUCKET WITH SIX KING MET 20U TEETH FOR A JOHN DEERE 160, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth TAG, 160

48" TAG HD BUCKET WITH WS & (6) TK350FD TEETH, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth, Width: 48" TAG, 210

3.4CU YD BUCKET WITH TEETH PIN-ON NEW CONDITION TO FIT A HYUNDAI HL757

36" GEITH HD BUCKET FOR A JOHN DEERE 210, Fits On (machine Category): Excavators, Strength: Heavy Duty, Gets: Teeth, Width: 36"

NEW HOLLAND 716925016, 230434, 78" WIDE, 4X1 BUCKET GREAT CONDITION.

6.5YD HD G/P BUCKET FOR HYUNDAI HL780, GREAT CONDITION, NEEDS BOCE.

2017 LABOUNTY MHP200 HYDRAULIC CONCRETE PULVERIZER, 4,850 LBS, MIN EXCAVATOR SIZE OF 44,000LBS, CYCLE TIME AT MAX FLOW: 4 SECONDS, JAW OPENING 37 INCHES, JAW DEPTH OF 33 INCHES, REACH OF 7.5FT TO MOUNT TO EXCAVATOR THAT HAS THE FOLLOWING DIMENSIONS: 80MM...

GEITH HD50-042, 206947, 42" WIDTH, HD DIGGING BUCKET, 1.35 YD CAPACITY, R250LC MOUNTING, 90MM PINS, 400MM DIPPER WIDTH, SIDE CUTTERS, V33SYL TEETH PIN SIZE: 90MM, STICK WIDTH: 400MM

Pictures are from when the bucket was received new. Werk-Brau 24" excavator bucket, .86 yd capacity Pin Diameter:: 90MM Stick Diameter: 382MM Fits Kobelco SK290-SK350 *Condition subject to change.

MOIL BREAK BIT, 5.51" DIAMETER, FITS MODEL: F27 KENT/FRD