Construction Equipment Scrap Processing Demolition Equipment For Sale In Billings

Unit has 3\" flanged ends. Unit was ordered in for a system customer defaulted on. 3\" flow meter new - never used 0 - 500 gpm ifm 4020 k/d/hart/6 s07 23644 iso kl.h q: 0 - 500 usgal/min gk 2.4228 i: 4 - 20 ma r1,=0.5kohm p: 1,000 hz 80mm/3\" - pfa -...

Has 1.0\" taper nozzle. New, never been used. Full or part circle. Full or part circle with 1\" nozzle. 2\" female pipe thread. SRNV100h nelson big gun with built-in shut-off valve.

Consisting of 2 - 1 1/2\" x 300\' poly pipe, 1 - 1 1/2\" straight coupling, 1 - 1 1/2\" quick coupler key, 3 - 1 1/2\" quick coupler valves, 1 - 1 1/2\" remale to slip adapter, 1 - 1 1/2\" quick coupler swivel, 1 - 1 1/2\" tow hook with rope, 7 - pod...

We later used the motor on a repair job and have the pump end only left. Complete pump end not including shaft sleeve and packing follower. Includes case h-01939, bracket l-03497, case gasket s-13760, impeller l-06131 (l5892 old #) packin s-13435 and...

5.33\\" impeller 3\\" flanged suction x 2 1/2 x 7\\" discharge. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 3\\" suction and 2 1/2\\" discharge. 280 gallons per minute at 120' head (52 psi) new, never used.

Includes gasket. 10\" by 30\' transmission pipe. $97.50 per length. 10 lengths left. New, never used. 10 inch x 30 foot transmission pipe. New, has never been used and includes gasket.

New, includes gates and gaskets. New, has never been used. $87.00 per length. 11 lengths left. 8\" x 30\' with 30\" spacing gated pipe. 8\" x 30\' with 30 inch spacing. Includes the gasket and gates.

800 gallon per minute capacity. New bearing assembly on spinner pipe. Self-cleaning suction screen, 8\" watermaster with 8\" flanged outlet.

New, never used. Has a 10 gallon tank with mixer. Insectigator set up for pivot system single phase unit. Has mister mist'r injector. 1.9 gph 125 psi single phase unit with 10 gallon tank.

Put new filters in engine and the whole unit is ready to go. Unit taken of center pivot which was converted to three phase power. Located in Billings, Montana. Pump gone through and new packing installed.

490 gpm at 60' head (26 psi), 350 gpm at 80' head (34 psi) and 240 gpm at 100' head (43 psi). Needs 10 hp 6\\" submersible motor. 4" female pipe thread discharge. Sell for $500.00 406-245-6139

Uses packing on shaft. 2\\" suction by 1 1/2\\" discharge fpt. Clockwise rotation. List price $1,268 will sell for $634.00 Berkeley b 1 1/2zrl frame mount pump new, never used. 150 gpm @ 108 psi @ 3600 rpm.

Paco pump model 10-2507-0300021. 280 gallons per minute at 120' head (52 psi) new, never used. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 5.33\\" impeller 3\\" flanged suction x 2 1/2 x 7\\" discharge.

1,000 gpm @ 150' tdh or 1,200 gpm @ 130' tdh. Took in on trade when customer bought electric driven pumps when 3 phase line run in. Located in Billings, MT Tuned up and ready to go.

Made by travis pattern and foundry. New, never used. List price $224.24 will sell for $100.00 each. Spigot by gasketed, never used. 8" gasketed female by male insert with 4" valve on 36" riser.

Paco pump model 10-2507-0300021. 280 gallons per minute at 120' head (52 psi) new, never used. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 5.33" impeller 3" flanged suction x 2 1/2 x 7" discharge.

Parts are in pretty good condition but there are no gears with it. 68A-G Gorman Rupp used parts. 8" suction head # 7296, inpeller # 7297, volute # 298B, gear box housing # 6412 and bottom base # 6409.

12 gpm @ 112 psi. 10 gpm @ 117 psi. New, never used. 189 psi max pressure. 8 gpm @ 138 psi. 1 hp booster pump made by a. 1 1/4\" inlet and discharge.

52:1 worm gear ratio with extended shaft. Wheel gear drive for valley pivots. New, never used. $290.00 each, have 6 on hand. Valley 52:1 gear drives with extended shaft, have never been installed on a pivot.

Pump taken off pivot when 3 phase power became available. Irrigation pump assembly on trailer with 500 gallon fuel tank. Located in Billings, Montana. Pump and engine serviced ready to go.

1952 John Deere model B tractor with good metal and very good condition with a push blade 2500.00 OBO Harrow also available for sale 1952 John Deere model B tractor with good metal and very good condition with a push blade 2500.00 OBO

1 SET OF 4 -33X6X11 12-16.5 BOBCAT SOLID TIRES. 95% FITS A770,A300,S750,S770

Esco 24" bucket, Fits Case CX27 mini-excavator

STEEL TRACKS OFF A JD 260 SKID STEER

2016 Trencher Fits all Skid Steers

WA470-8 10YD Pin On Bucket

Quick Attach QA 74500 Brush Chipper