Construction Equipment Miscellaneous Equipment For Sale In Billings

3\" flow meter new - never used 0 - 500 gpm ifm 4020 k/d/hart/6 s07 23644 iso kl.h q: 0 - 500 usgal/min gk 2.4228 i: 4 - 20 ma r1,=0.5kohm p: 1,000 hz 80mm/3\" - pfa - hc - pn 150 psi 115v 8va 48-63 hz $950.00

Has 1.0\" taper nozzle. SRNV100h nelson big gun with built-in shut-off valve. SRNV100h nelson big gun with built in shut-off valve. 2\" female pipe thread. Full or part circle. Full or part circle with 1\" nozzle.

$1,900.00 (over 2,300 list) Irripod irrigation system. New, just needs to be put together. Consisting of 2 - 1 1/2\" x 300\' poly pipe, 1 - 1 1/2\" straight coupling, 1 - 1 1/2\" quick coupler key, 3 - 1 1/2\" quick coupler valves, 1 - 1 1/2\" remale...

Pump was on a pivot and was undersized and after second season was replaced. Includes case h-01939, bracket l-03497, case gasket s-13760, impeller l-06131 (l5892 old #) packin s-13435 and lantern ring s-19200.

Paco pump model 10-2507-0300021. 3\\" suction and 2 1/2\\" discharge. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 5.33\\" impeller 3\\" flanged suction x 2 1/2 x 7\\" discharge.

New, has never been used and includes gasket. New, never used. $97.50 per length. 10 inch x 30 foot transmission pipe. 10\" by 30\' transmission pipe. 10 lengths left. Includes gasket.

Includes the gasket and gates. 8\" x 30\' with 30\" spacing gated pipe. $87.00 per length. 8\" x 30\' with 30 inch spacing. New, has never been used. 11 lengths left. New, includes gates and gaskets.

Self-cleaning suction screen, 8\" watermaster with 8\" flanged outlet. New bearing assembly on spinner pipe. 800 gallon per minute capacity.

1.9 gph 125 psi single phase unit with 10 gallon tank. New, never used. Insectigator set up for pivot system single phase unit. Has mister mist'r injector. Has a 10 gallon tank with mixer.

1,000 gallon per minute at 150 foot head pressure. Pump gone through and new packing installed. Located in Billings, Montana. Cornell 4RB6 driven by John Deere 6329 diesel engine on a trailer with 500 gallon fuel tank

490 gpm at 60' head (26 psi), 350 gpm at 80' head (34 psi) and 240 gpm at 100' head (43 psi). Submersible turbine pump end only 6\" with 4\" fpt outlet. Submersible cast iron turbine pump with bronze impellers.

Uses packing on shaft. Frame mount centrifugal pump berkeley b 1 1/2zrl b52383 clockwise rotation new, never used 100 gpm at 143 lbs pressure at 3600 rpm. List price $1,268 will sell for $634.00

Paco centrifugal pump 280 gpm at 120' head 15 hp 3 phase new, never used $1,125.00 Paco pump model 10-2507-0300021. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 5.33\\" impeller 3\\" flanged suction x 2 1/2 x 7\\" discharge.

Irrigation pump with diesel engine on a trailer with 500 gallon fuel tank. 1,000 gpm @ 150' tdh or 1,200 gpm @ 130' tdh. Located in Billings, MT Tuned up and ready to go. Priced at $5,000.00 USD.

Made by travis pattern and foundry. 5 steel epoxy coated irrigation risers for 8\" pip pipe. 8" pip epoxy coated irrigation risers. 8" gasketed female by male insert with 4" valve on 36" riser.

Paco 15 hp pump 3 phase 280 gallons per minute at 120 head (52 psi) model # 10-2507-0300021 Paco pump model 10-2507-0300021. 15 horsepower 3 phase 208-230/460 volt 3450 rpm. 5.33" impeller 3" flanged suction x 2 1/2 x 7" discharge.

68A-G PTO pump used parts. Parts are in pretty good condition but there are no gears with it. 68A-G Gorman Rupp used parts. 8" suction head # 7296, inpeller # 7297, volute # 298B, gear box housing # 6412 and bottom base # 6409.

8 gpm @ 138 psi. 189 psi max pressure. 10 gpm @ 117 psi. 12 gpm @ 112 psi. 1 hp booster pump made by a. 1 1/4\" inlet and discharge. New, never used.

$290.00 each, have 6 on hand. Valley 52:1 gear drives with extended shaft, have never been installed on a pivot. New, never used. 52:1 worm gear ratio with extended shaft. Wheel gear drive for valley pivots.

1,000 gallons per minute at 65 punds pressure. Pump and engine serviced ready to go. Located in Billings, Montana. Cornell 4rb6 driven by john deere 6329 diesel engine on trailer with 500 gallon fuel tank

1952 John Deere model B tractor with good metal and very good condition with a push blade 2500.00 OBO Harrow also available for sale 1952 John Deere model B tractor with good metal and very good condition with a push blade 2500.00 OBO

110 foot ladder truck

95% FITS A770,A300,S750,S770 1 SET OF 4 -33X6X11 12-16.5 BOBCAT SOLID TIRES.

Esco 24" bucket, Fits Case CX27 mini-excavator

STEEL TRACKS OFF A JD 260 SKID STEER