Construction Equipment Drills For Sale In Nevada

MS-2A air track drill with Joy VCR360 hammer, Includes dust collector, but not installed. Drill is ready for work. Square boom, operator noise sheild, rear winch, and operator controls.

-- For more information, visit our website and enter reference #11057 General Description: 1997 Inrock Mud Mizzer 100 Mud Recycling System with 186 Hours Only! Ready for More Work! Additional Information: -1,000 Gallon Tank -Two 2x3 Pumps with 1-7/8"...

520' of Drill Pipe, 160 hp Cummins, 4500 ft-lbs Rotary Torque, 4 lbs Thrust/Pullback Force

2.5 - 3.5 Inch Class* HD712 Drifter w/ 4,843 Percussion Hours* New Engine January 2010 w/ 6,890 Hours* Drifter redone each winter 10,453 Total Frame Hours

Tamrock self contained hydraulic drill with Deutz air cooled engine. Good condition. Has 1185 impact hours.

Montabert Micro CPA Package* Bobcat Mini Excavator E60 w/ 600 Hours* HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment This Drill Attachment can use 1.0 - 1.25...

Drill is in good condition and ready to go to a jobsite. Comes with a full rack of rod in good condition.

1994 Texoma 600 Pier Drill Mounted on Mack Cabover Truck, 1563 hrs & 71K miles on Automatic Mack V6 Diesel, 40' drill depth, Drill run by Detroit 4 cyl diesel motor. EXW: TX $98,000.

It has a JD engine This boring machine is complete with 280' of steel, sond, water tank, pump and bentonite hopper, and locator. The tracks are good. This is not a rock machine.

MAKE OF MACHINE: MTI / JOY MODEL OF MACHINE: CJ240 2 BOOM JUMBO SERIAL # OF MACHINE: 1935 MAKE OF ENGINE: DEUTZ ENGINE SERIAL #: F6L912 EXHAUST WRAPPED MAKE OF TRANS: MODEL OF TRANS: FRONT AXLES: JD 12000?

Plain Grain, Skid Steer tires, $56,000 40' with 10\" Spacing, 5,000 acres, nice and dependable. Plain Grain, Skid Steer tires, $56,000 Slight scratches on end from bushes brushing against.

One of a kind machine. All hydraulics have been completely serviced and/or repaired. Capable of High Torque Deep Drilling and can be set up for an Air-Hammer. Extra Kelly Bar and Air Bar Available.

WE HAVE 3930' FT (131 PIPE'S ) TO FIT ON RD20, RD10, T4W OR DM45E DRILL RIG WE HVE 3930FT (131 PIPE'S ROD) TO FIT ON T4W OR DM45E SIZE IS 4 1/4 INCH X 30'LONG E, 16.60# RNG 2 RD-20 DP W/2-28"IF TOOL JTS ASKING PRICE $550.00 EACH PIPE X 131 PIPE =$72,000...

20', 7.5\\", 6101 acres. $17,000 each/offer Cut fuel costs by 60% IH 1486 with Dual 3100 loader 6268 hours. C-IH 5400 No-Till Drill & 5000 Coulter Cart .

PACKAGE includes mixer, drill, and trailer. Includes 50 rods in good condition. All in good condition.

Great Plains 1006 NT No-till drill - 10' Width with 7.5\" spacings - small seed attachment - 588 acres on meter. Great Plains 1006 NT No-till drill - 10' Width with 7.5\" spacings - small seed attachment - 588 acres on meter

2015 Haybuster 10' Drill $18,500 Call today for more information Good Condition...

Seller's Description: drill is in very good condition. All offers encouraged! Out of the 1943 hours on the machine 848 are idle hours.

International 24 Hole Grain Drill, 6" Spacing, Single Disc Openers, Grass Seed, Cyl And Hoses, Plants 12' Wide, 7.50-20 Tires, Rear Platform, 12" Openers

300 galon tanks, Honda engines.

FM13 mix pump, 13Hp Honda gas, (2) 1000 mix tanks, all hoses, work ready Asking $9,500 obo

All Equipment is in Very Good Working Condition. Machine Only - Rods and Tooling are available an additional cost. This machine was originally a 160,000 lbs unit but has been upgraded by American Augers to a 350,000 lbs drilling rig.

Single Boom Jumbo Diesel Hydraulic Jumbo with 50 Series DDEC 6'-11" Wide 33' Long (without feed rail) 21'-6" (feed rail) 10'-5" High (without ROPS) 11'-7" High (with ROPS).

20'PLAIN DRILL 7.5" SPACING REG WEAR SEED BOOTS MARKERS SMOOTH GAUGE WHLS ELEC POP RATE CTRL CASTER WHL HITC H 31-13.5 TIRES FRON T RANK LOCK UP LESS GRASS SEED. Other websites show the location as Assumption, IL or Monroe, WI, while it may be at any...

Twin 750 gallon mud mixers on flat bed with kohler gas engines $

4030 Crust Buster 30' Drill with 10" Spacing, Hydraulic Down Pressure and monitor.