Construction Equipment Conveyor Feeder Stacker For Sale In San Jose

CEMA "C" troughing and return rollers. 10" deep channel frame construction. 30" x 20' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

New Pit Portable 36"x100'' Radial Stacking Conveyor • Discharge Height: 31' High (18°) - 4 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x 1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Wrap Type mid drive • Lagged head Pulley:...

150 TPH • Extra wide 30" belt, 15° idlers, 300' per minute • 45" Discharge Height • Adjustable support 665 • 5-1/2" Low Profile. 7.5HP Rail Unloader • 7.5HP 3-Phase Electric motor 230/460v • Unloader approx.

It is the responsibility of the end user to have them checked by a local inspector Prime – Sandblasted, (1) coat primer painted Paint – (1) coat enamel in customer specified color Owners Manual – (1) copy for maintenance and parts Electrical Switch...

36" x 60' XHD Channel Frame

18" X 45' Conveyor Hopper 7'x8' Ramsey Microtech 2000 Scale Eriez Magnetic Separator s/n-T009730, Style- 18x48, Model- HVF-18 Max V Belt Cleaning System Fully Shielded Conveyor 275/70Rx22.5 Tires At 95 % Good 7.5 HP Motor 575 Volt Conveyor Electric Drive...

CALL FOR MORE INFORMATION. 40' AND 50' RADIAL STACKER/CONVEYORS AVAILABLE.

READY TO WORK!! CALL OR EMAIL FOR MORE INFORMATION: sales@ | 843-420-1077 2014 Edge MS80 x 48in Radial Stacking Conveyor -Cat Diesel Engine -Only 312 Hours -80ft x 48in conveyor -Heavy Duty Truss Frame Construction -Radial Axle for Maximum Stockpile -1000...

Simplicity 3' X 8' Vibrating Grizzly Feeder Simplicity 36" X 8' Vibrating Grizzly Feeder - Nice little VGF for small plant.

Includes 3 discharge chutes, electrical switchgear, electric motor, and SO cord to connect to on-board switch-gear. Trio 52"x24' VGF with 6' Grizzly bed @ 5" spacing, and 6' Grizzly bed @ 9" spacing.

CEMA "C" troughing and return rollers. 10" deep channel frame construction. 24" x 20' Channel Frame Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

TS 150 Telestacker Conveyor New Fully braces undercarriage Proportionate Valve for deceleration and acceleration at the end of radial travel Backstops installed in reducers Capacity is 1,000 STPH of 100 PCF material Browning Sealmaster bearings Screw...

Rock Systems Model 104-B Drive-Over Unloader Rock Systems Drive-Over Unloader for scrapers, end dump trucks and belly dump trucks with 10’-9” x 14’-8” hopper opening; hopper constructed of 3/8” thick steel plate with reinforcing; struck hopper capacity...

3-ply belt in fair to good condition. 10 hp electric motor with a Dorris #207 reducer. Unit must be taken down. 30"x80' channel conveyor (6") with 35 degree idlers (both Marco & Superior).

One rust inhibitor prime coat and one finish coat gray enamel paint for all equipment; one finish coat safety yellow enamel paint for all guarding. Belt speed setup for 50 fpm. 7’-8" wide x 13’ long hopper opening with 13.5 cubic yards struck storage...

Athey forced feed loader. Front loading with rear discharge. HMR 530.8. Has good tires. Date of manufacture was 12/84 Ford Industrial gas engine. All hydraulic drive on the belt.

• Belt speed approximately 320 FPM. • 2 guide rolls on the return belt side at the tail end of the conveyor. • F.O.B.: Phoenix, AZ • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

Rock Systems Model 108-6S Stationary Bin Blending Hopper Rock Systems stationary 6 bin blending hopper complete with 9’-6” wide x 14’ long bins with 20 ton storage capacity each; 30” wide roller belt feeders with 5 h.p. fixed speed electric motor...

Low profile telescopic conveyor Masaba track technology Auto stockpiling Available for rental 36" x 150' telescopic conveyor.

Heavy duty feeder for large rock complete with Trio 40” wide x 16’ long vibrating feeder with 40 hp electric motor drive; 16’ wide x 16’ long heavy duty feed hopper with folding wing extensions for travel; 48” wide x 40’ long heavy duty discharge...

MS65 wheeled & self contained diesel over hydraulic stacker, Cat power, head fold

Rock Systems Portable Weigh Conveyor Rock Systems 24" wide x 65' long portable weigh conveyor with 10 h.p. electric motor, Dodge shaft mount speed reducer with internal backstop, v-belt drive and drive guard, rubber lagged head pulley, self-cleaning tail...

Hydraulic main lift and top fold are standard, as is the diesel power unit. With its durable truss frame, large feed hopper and base production capacity of 500 TPH with optional upgrades to 800 TPH, the McCloskey ST TRACKED Stackers stand up well above...

• Heavy Duty Undercarriage, 8x8 Tubing Axle, 16” Tires & Rims • Lagged head 16” Dia., 1 15/16” Shaft & Ball Bearing • Winged Tail, 1 15/16” Shaft & Ball Bearings w/Screw Take-ups • World Wide #2, Motor mount, and guard • Motor, 3 hp, TEFC, 230/460...

10' x 12' feed hopper with manual slide gate Specifications: • 11.5 CY capacity. • Dimensions: 10' wide x 12'0" long x 10' high. • F.O.B.: Phoenix, AZ • PRICE: $8,250