Construction Equipment Conveyor Feeder Stacker For Sale In Louisville Jefferson County

CALL FOR MORE INFORMATION. 40' AND 50' RADIAL STACKER/CONVEYORS AVAILABLE.

3-ply belt in fair to good condition. Unit must be taken down. 10 hp electric motor with a Dorris #207 reducer. 30"x80' channel conveyor (6") with 35 degree idlers (both Marco & Superior).

KPI channel frame design Head Section - rubber lagged head pulley Tail Section - wing type self cleaning tail pulley Hydraulic drive - plumbed to tail end, 12 gpm @ 2,000 psi Receiving trough with radial hopper design Idlers- CEMA B 20 and 35 degree idlers...

IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM CHECKED BY A LOCAL INSPECTOR - ELECTRICAL SWITCHGEAR WITH 250' POWER CORD SUPERIOR 36" X 80' PORTABLE RADIAL STACKING CONVEYOR, EQUIPPED WITH: - 30" DEEP TRUSS MAIN FRAME - CLASS I HEAD END DRIVE -...

(11) CARRIER 36 x 48 Vibratory Feeders, 1hp, Very Good Condition.

Axle 18" Lagged Drive Pulley with Two WIng -Type Pulleys for Belt Wrap Drive 5" Troughing and Return Idlers Road Portable Pintle Tow Tongue and Fifth Wheel King Pin Dual Wheels with Air Brakes RENTAL PURCHASE PRICE - $52,800

36x46, Adjustable Grizzly Bars 18 Cubic Yard Heavy Duty Feeder.

80' Diesel powered radial conveyor New and ex rental units available.

Will sell individual pieces. Also another 42"x6' apron feeder for the fines underneath. Fed by 42"x12' apron feeder with feed hopper (vg steel). 5X14 3 Step-deck Rip Rap screen consisting of (1) 5'x6' section with nominal 5" grizzly bars (2) 5'x4' sections...

• F.O.B.: Phoenix, AZ • PRICE: $8,250 10' x 12' feed hopper with manual slide gate Specifications: • 11.5 CY capacity. • Dimensions: 10' wide x 12'0" long x 10' high.

KOLBERG 47-3670 ROLL-AWAY STACKABLE 3-PACK CONVEYORS, EQUIPPED WITH: - FRAME - 30" DEEP HEAVY DUTY LATTICE TYPE FRAME DESIGNED WITH RECESSED RECEIVING TROUGH; TROUGHING AND RETURN IDLERS TO ALLOW FOR STACKING ONE ON ANOTHER FOR EASEOF TRANSPORTATION -...

Heavy Duty 10" Channel Frame with Angle Iron Top Chord, 15 HP TEFC Electric Motor, Dodge S-M-R with V-Belt Drive and Guard, Cema "C" 36" X 35 degrees X 5" Troughing Idlers and Returns, 14" Rubber Lagged Heavy Duty Head Pulley, 12" Heavy Duty Wing Tail...

Works extremely well in sandy soils where material dug out can be used in backfill, very good condition Trench backfill conveyor - 48" x 72', 12 yard hopper, 61,000 lbs, repowered with 2005 Perkins 5.9L model 1006-6TW with 122 hours on engine, 6 wheel...

Date of manufacture was 12/84 All hydraulic drive on the belt. Athey forced feed loader. Ford Industrial gas engine. Front loading with rear discharge. HMR 530.8. Has good tires.

6' receiving hopper with 6" rubber flashing. 24" x 40' Channel Frame More Sizes Available Specifications: 10 HP WorldWide industrial grade motor and Leroy Somers 203 shaft mount reducer.

Located in Wynot NE 402-841-3604 30"x65 conveyor, has new belt, 3 phase motor 30" x 65' Greystone conveyor with 3 phaze motor works great and replaced the belt last year. We also have wash plant and blade mill and some more conveyors.

PLEASE CALL FOR MORE INFORMATION. VARIOUS SIZES AND MAKES OF CONVEYORS. 24", 30" 36" WIDE, 60' -120' LONG.

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

Dimensions: 8'-0 Wide x 12'-0 Long x 10'-0 High 1/4" Steel with reinforced sides Lagged Head Pulley 16" Diameter, 2 15/16" shaft Winged Tail Pulley 14" Diameter, 2 15/16" shaft Screw type belt tensions 20 hp TEFC 1,800 RMP 230/460 Volt 2-Ply, 220 PIW...

Dimensions: 8'-0 Wide x 12'-0 Long x 10'-0 High 1/4" Steel with reinforced sides Lagged Head Pulley 16" Diameter, 2 15/16" shaft Winged Tail Pulley 14" Diameter, 2 15/16" shaft Screw type belt tensions 20 hp TEFC 1,800 RMP 230/460 Volt 2-Ply, 220 PIW...

• 25hp electric motor drive with Leroy Somer 215 shaft mounted speed reducer. • 16" Lagged directional head pulley with 2 7/16" diameter head shaft. • 2 guide rolls on the return belt side at the tail end of the conveyor.

Simplicity 3' X 8' Vibrating Grizzly Feeder Simplicity 36" X 8' Vibrating Grizzly Feeder - Nice little VGF for small plant.

Low profile telescopic conveyor Masaba track technology Auto stockpiling Available for rental 36" x 150' telescopic conveyor.

Electric engine 30'' X 33' strap.

In order to deal with shock loads of 10 tons and more the Direct Load Stacker uses a very heavy duty build and includes tightly spaced impact rollers, heavy duty 3 ply belting and reinforced frame.

Both good looking units (2 available) 26"x36" with 5'x5' feed hopper. 480 volts & 15 amps.

100' x 36 track conveyor