Construction Equipment Conveyor Feeder Stacker For Sale In Idaho

13 1/2" Self-cleaning flat bar tail pulley with 1 15/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 1 15/16" diameter head shaft, Browning bushings and Sealmaster...

SHAPE, WORKING DAILY CEDAR RAPIDS 24" X 60' RADIAL STACKER, 24" BELT, EXCELLENT SHAPE. 24 x 60 RADIAL STACKER, EXC. CALL FOR MORE INFORMATION.

30"x65 conveyor, has new belt, 3 phase motor 30" x 65' Greystone conveyor with 3 phaze motor works great and replaced the belt last year. Located in Wynot NE 402-841-3604 We also have wash plant and blade mill and some more conveyors.

Mounted on a single axle chassis with air brakes and tail lights. Hydraulic power system for Grizzly dump. Feeder includes 10hp motor with Dodge gearbox. 12 Yard hopper with 30" x 10' belt feeder.

Superior 48” RazertTail™ Truck Unloader -Grate 10’ x 5’ -Hydraulic self-cleaning ramps -Ramp Bulkhead with hyd raise and lower -Single axle -Brakes, Lights, Mud flaps -Crank down landing jacks -15 hp electric pumping unit -Adjustable flow gate -Electrical...

E) Conveyor belting, 2 ply, with 3/16” top rubber cover and 1/16” bottom rubber cover; Flexco 140 mechanical belt splice. C) Standard 5’ long receiving hopper with skirtboards, rubber flashing and bolt-on wing attachments.

18 cubic yard gravel feeder. Adjustable grizzly. Hydraulic tilt grizzly 36” feed belt onto 42” discharge.

30"x30' conveyor on 6" channel frame with smooth head & tail pulleys, 20 degree idlers, Browning gear reducer. Overall, fair to good condition. 2-ply belt in good condition.

CEMA "C" troughing and return rollers. 13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups.

E) Electric motor control panel pre-wired to the electric motor. C) Steel fabricated trailer frame with single axle chassis, pneumatic tires, brakes, lights, mud flaps and 5th wheel pin.

We do not warrant that our guards will meet all local codes. 30" Wide x 80' Long Self-Contained Radial Stacker 30" Wide x 80' Long Portable Self-Contained Radial Stockpiling Conveyor complete as follows: • Main frame - 30" deep truss, Chord angles -...

10 hp electric motor with a Dorris #207 reducer. 3-ply belt in fair to good condition. 30"x80' channel conveyor (6") with 35 degree idlers (both Marco & Superior). Unit must be taken down.

• 2 guide rolls on the return belt side at the tail end of the conveyor. 2-ply belting with 3/16"x1/16" covers. • 24" deep lattice frame construction with 3"x3"x1/4" chord angles.

Simplicity 3' X 8' Vibrating Grizzly Feeder Simplicity 36" X 8' Vibrating Grizzly Feeder - Nice little VGF for small plant.

Chains NOT INCLUDED Drive – Head drive Gear Reducer – Dodge #5 with sheave, QD bushings and backstop Motor – 20 HP electric with sheave and QD bushings V-Belt Drive – with drive guard Capacity – 750 TPH based on 100# per cu/ft of material Belt Speed...

Excellent Condition Has 50 ton hopper can load out up to 2100 ton per hour Loads approximately 710 ton per hour sand and gravel at 8 feet per minute with 20 hp motor at 13 amps 180 to 1 dodge box with hopper Approximately 100,000 pounds

New Pit Portable 36"x100'' Radial Stacking Conveyor • Discharge Height: 31' High (18°) - 4 Adjustments • 36" Deep truss, 3x3x1/4 Cord Angle, 2x2x 1/4 Lattice • 8" Pipe Axle, 10-Bolt 22" Tires & Wheels • Wrap Type mid drive • Lagged head Pulley:...

13 1/2" Self-cleaning flat bar tail pulley with 2 3/16" diameter tail shaft, Browning bushings, Sealmaster bearings and adjustable 16" take-ups. 13 1/2" Lagged directional head pulley with 2 3/16" diameter head shaft, Browning bushings and Sealmaster...

65' Diesel powered radial stacker

Rock Systems Model 104-B Drive-Over Unloader Rock Systems Drive-Over Unloader for scrapers, end dump trucks and belly dump trucks with 10’-9” x 14’-8” hopper opening; hopper constructed of 3/8” thick steel plate with reinforcing; struck hopper capacity...

Heavy duty 30" deep truss made with 3x3x3/8" main chord angles, 2x2x1/4" angle bracing. 20 hp drive, Falk 5215 speed reducer, Precicion lagged head pulley, wing tail pulley, Precision CEMA B Troughing and return idlers, receiving trough with adjustable...

KPI channel frame design Head Section - rubber lagged head pulley Tail Section - wing type self cleaning tail pulley Hydraulic drive - plumbed to tail end, 12 gpm @ 2,000 psi Receiving trough with radial hopper design Idlers- CEMA B 20 and 35 degree idlers...

Rock Systems Front End Loader Hopper with Belt Feeder, Model 101-30 complete as follows: a) 12’ wide hopper opening with 15 ton storage capacity (based on 100 lbs/cu. Material); b) Hopper constructed of 1/4” thick steel plate with reinforcing and 5...

ROLLS, SEALED FOR LIFE BALL BEARINGS - LOAD AREA: 20 DEGREE TROUGH, 12-16" SPACING - TROUGH: 35 DEGREE ON 4' SPACING - RETURNS: STEEL ROLLS, ON 10' SPACING - RADIAL HOPPER: SLOPED, 5' LONG, BOLT ON DESIGN - GATHERING TROUGH: 5' LONG WITH ADJUSTABLE RUBBER...

26" dump height, 7.5' discharge height. Iron City Supply HD End Dump Truck Unloading Conveyor. Electric, diesel, or hydraulic motor options 48" Belt with a 10' hopper. Conveys up to 1500 tons per hour of 100pcf material.

IT IS THE RESPONSIBILITY OF THE END USER TO HAVETHEM CHECKED BY A LOCAL INSPECTOR - FRAME REINFORCEMENT PACKAGE WITH 2" X 2" UPRIGHTS AND 2" X 4" TUBULAR CORD ANGLE - (2) LIFTING EYES - AT CONVEYOR 1/3 POINTS - (4) ADJUSTABLE SUPPORT LEGS

Rock Systems Model 108-5S Stationary 5 Bin Blending Hopper Rock Systems stationary 5 bin blending hopper complete with 9’-6” wide x 14’ long bins with 20 ton storage capacity each; 30” wide roller belt feeders with 5 h.p. fixed speed electric motor...